Manuals+

CPVan GB010

CPVAN Window Vibrating Detector (Model: GB010) User Manual

For use with CP10 Pro Home Alarm System

1. Introduction

The CPVAN GB010 Window Vibrating Detector is a wireless vibration sensor designed to enhance the security of your home or property. Operating at 433Mhz, this accessory detects vibrations on surfaces such as windows, doors, or other objects, triggering an alarm through your compatible CP10 Pro home alarm system. It provides an early warning against forced entry or tampering.

CPVAN Window Vibrating Detector installed on a window, showing vibration detection
Figure 1: CPVAN Window Vibrating Detector in action, detecting vibrations.

2. Key Features

  • Vibration Detection: Accurately senses vibrations caused by impacts or attempts to break surfaces.
  • Wireless Operation: Communicates wirelessly with the CP10 Pro alarm host at 433Mhz.
  • Emergency Button: Features a concealed emergency button for manual SOS activation.
  • Alarm Indicator: Visual LED indicator for alarm status.
  • Easy Installation: Mounts easily with included double-sided tape.
Diagram showing the vibration detection transmitter, concealed emergency button, and alarm indicator on the sensor
Figure 2: Key components of the CPVAN GB010 detector.

3. Setup and Installation

Follow these steps to set up and install your CPVAN GB010 Vibrating Detector:

  1. Open Housing: Gently open the detector's housing. The upper apex can be pushed slightly to release the cover.
  2. Install Battery: Insert the provided 23A 12V battery into the battery compartment, ensuring correct polarity.
  3. Add Sensor to Alarm Panel: Pair the sensor with your CP10 Pro home alarm system according to your alarm panel's instructions. This typically involves putting the panel into 'learning' or 'add sensor' mode and then triggering the sensor (e.g., by pressing the emergency button or causing a vibration).
  4. Apply Double-Sided Tape: Attach the included double-sided tape to the back of the detector.
  5. Mount Detector: Firmly stick the detector onto the desired surface, such as a window pane or door frame. Ensure the surface is clean and dry for optimal adhesion.
  6. Test System: Verify that the alarm host receives notifications when the sensor detects a vibration or when the emergency button is pressed.
Six-step visual guide for installing the CPVAN vibration sensor, from opening housing to receiving alarm notifications
Figure 3: Visual guide for the installation process.
Video 1: Demonstration of opening the sensor housing and battery installation.

4. Operation

Once installed and paired with your CP10 Pro alarm system, the GB010 detector operates as follows:

  • Vibration Detection: When the alarm system is armed, any significant vibration detected by the sensor will trigger an alarm. The sensor will send a signal to the CP10 Pro alarm panel.
  • Alarm Response: The alarm panel will activate its siren, and if configured, send notifications to your linked mobile application.
  • Emergency SOS: In case of an emergency, you can manually activate an SOS alarm by pressing the concealed emergency button on the side of the detector. This will immediately alert the alarm system.
  • Alarm Indicator: The small indicator light on the sensor will illuminate when an alarm is triggered or during certain operational states.
Image showing the vibration sensor detecting an impact, triggering an alarm on the CP10 Pro panel and sending a notification to a smartphone app
Figure 4: Alarm activation and notification process.
A hand pressing the SOS emergency button on the CPVAN vibration detector
Figure 5: Activating the concealed SOS emergency button.

5. Maintenance

  • Battery Replacement: The detector uses a 23A 12V battery. When the battery is low, the alarm panel may indicate a low battery status for the sensor. Replace the battery promptly to ensure continuous protection. Refer to the 'Setup and Installation' section for instructions on opening the housing.
  • Cleaning: Wipe the detector with a soft, dry cloth to remove dust or dirt. Do not use abrasive cleaners or solvents, as these may damage the device.
  • Adhesion Check: Periodically check the double-sided tape to ensure the detector remains firmly attached to the surface. Reapply tape if necessary.

6. Troubleshooting

Problem Possible Cause Solution
Sensor not triggering alarm Low or dead battery; Sensor not paired correctly; Sensor too far from alarm panel; Insufficient vibration. Replace 23A 12V battery; Re-pair sensor with alarm panel; Relocate sensor closer to panel; Test with stronger vibration.
False alarms Sensor sensitivity too high (if adjustable); Loose mounting; Environmental factors (e.g., strong winds, heavy traffic). Check alarm panel settings for sensitivity adjustment (if available); Ensure sensor is firmly mounted; Consider alternative mounting locations.
SOS button not working Low or dead battery; Sensor not paired correctly. Replace 23A 12V battery; Re-pair sensor with alarm panel.

7. Specifications

Attribute Detail
Model Number GB010
Brand Name CPVan
Origin Mainland China
Certification CE
Operating Frequency 433Mhz
Battery Type 23A 12V (Alkaline)
Dimensions (L x W x H) 64mm x 30mm x 14mm (approx.)
Features Window Vibrating Detector, Car Vibrating Detector, Emergency SOS Button
Compatibility CP10 Pro Home Alarm System
Package Weight 0.1 kg
Package Dimensions 10cm x 10cm x 10cm
Image showing the dimensions of the CPVAN GB010 detector (64mm x 30mm x 14mm) and a 23A 12V battery
Figure 6: Detector dimensions and battery type.
Multiple views of the CPVAN GB010 detector, showing front, back, side, bottom, and upper apex with housing opening instruction
Figure 7: Various views of the detector, including how to open the housing.

8. User Tips

  • Optimal Placement: For best performance, place the detector directly on the glass pane of a window or the solid surface of a door. Avoid placing it on flexible or uneven surfaces that might absorb vibrations.
  • Regular Testing: Periodically test the sensor by gently tapping the protected surface to ensure it triggers the alarm system correctly. This confirms battery life and proper communication.
  • Battery Life: While the 23A 12V battery offers good longevity, consider having a spare on hand for quick replacement to avoid security gaps.

9. Warranty and Support

The CPVAN GB010 Window Vibrating Detector is CE certified, indicating compliance with European safety, health, and environmental protection requirements.

For any technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact the CPVan Official Store or your product retailer directly. Keep your purchase receipt as proof of purchase.