IROK ZN 87 Mechanical Keyboard User Manual

Introduction

Welcome to the user manual for your IROK ZN 87 Mechanical Keyboard. This keyboard is designed for versatility and performance, featuring 3-mode connectivity (Bluetooth, 2.4G Wireless, and Wired USB-C), hot-swappable switches, vibrant RGB lighting, and a compact 87-key layout. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new keyboard.

Figure 1: IROK ZN 87 Mechanical Keyboard Layout

Key Features

3-Mode Connectivity: Seamlessly switch between Bluetooth, 2.4G Wireless, and Wired (USB-C) connections.
Hot-Swappable Switches: Customize your typing experience by easily changing mechanical switches without soldering.
Dynamic RGB Backlighting: Enjoy 16.8 million colors with various customizable lighting effects.
Compact 87-Key Layout: A tenkeyless design that saves desk space while retaining essential keys.
Gasket Structure: Enhanced typing feel and acoustics with a flexible gasket-mounted design.
Sound Absorbing Layers: Three-layer sound absorbing structure for improved typing sound.
Side Streaming Lights: Additional aesthetic lighting along the sides of the keyboard.
MacOS Support: Dedicated switch for compatibility with macOS systems.
Durable Keycaps: Made from ABS plastic for longevity.

Package Contents

Please check the package for the following items:

IROK ZN 87 Mechanical Keyboard
USB-C to USB-A Cable
2.4G Wireless Receiver (stored in keyboard compartment)
User Manual (this document)
Keycap Puller (may be included for hot-swap functionality)
Switch Puller (may be included for hot-swap functionality)

Setup Instructions

1. Powering the Keyboard

The keyboard uses dual AAA batteries for wireless operation. Ensure fresh batteries are installed in the compartment located on the underside of the keyboard. The USB-C port can be used for wired connection and to power the keyboard.

2.4G Receiver and AAA Battery Compartment — Figure 3: Location of 2.4G receiver and AAA battery slots.

2. Selecting Connection Mode

On the side of the keyboard, you will find physical switches to select your desired operating system and connection mode:

Operating System Switch: Toggle between WIN (Windows) and MAC (macOS) modes for optimal key mapping.
Connection Mode Switch: Select between BT (Bluetooth), OFF (Power Off), and 2.4G (2.4G Wireless).

Mode Selection Switches (WIN/MAC, BT/OFF/2.4G) — Figure 4: Physical switches for OS and connection mode selection.

3. Connecting Your Keyboard

Wired Connection (USB-C)

Ensure the connection mode switch is set to OFF.
Connect the provided USB-C cable to the keyboard's USB-C port.
Connect the other end of the cable (USB-A) to an available USB port on your computer.
The keyboard will be automatically recognized and ready for use.

USB-C Port and Cable Connection — Figure 5: USB-C port for wired connection and power.

2.4G Wireless Connection

Locate the 2.4G wireless receiver in its storage compartment on the underside of the keyboard.
Plug the 2.4G receiver into an available USB port on your computer.
Set the connection mode switch on the keyboard to "2.4G".
The keyboard should connect automatically. If not, press and hold the Fn key + P key for 3 seconds to initiate pairing.

Bluetooth Connection

Set the connection mode switch on the keyboard to "BT".
On your computer or device, enable Bluetooth and search for new devices.
Press and hold the Fn key + Q, W, or E key for 3 seconds to enter pairing mode for Bluetooth device 1, 2, or 3 respectively. The indicator light will flash rapidly.
Select "IROK ZN 87" (or similar name) from the list of available Bluetooth devices on your computer/device.
Once paired, the indicator light will stop flashing and remain solid.
To switch between paired Bluetooth devices, press Fn + Q, Fn + W, or Fn + E briefly.

Operating Instructions

Function Key Combinations (Fn Key)

The Fn key (located near the right Alt key) allows access to secondary functions printed on the keycaps. Hold down the Fn key and press the desired function key.

Key Combination	Function
Fn + F1-F12	Multimedia controls (e.g., Play/Pause, Volume Up/Down, Mute, Previous/Next Track)
Fn + Q/W/E	Switch between Bluetooth devices (Q, W, E for BT1, BT2, BT3)
Fn + P	Initiate 2.4G pairing (hold for 3 seconds)
Fn + Ins/Home/PgUp/PgDn/End/Del	Control RGB lighting modes and effects (e.g., change pattern, speed, brightness)

RGB Backlighting Control

The IROK ZN 87 features 16.8 million colors RGB phantom lighting with various effects. Use the Fn key in combination with specific keys (often Ins, Home, PgUp, PgDn, End, Del) to cycle through lighting modes, adjust brightness, change speed, and select colors. Refer to the keycap legends for specific lighting control functions.

RGB Lighting Effects Examples — Figure 6: Examples of RGB lighting effects.

Side Light Bar Illustration — Figure 7: The keyboard features a customizable side light bar.

Hot-Swappable Switches

The keyboard supports hot-swappable mechanical switches, allowing you to change switches without soldering. Use the provided switch puller to carefully remove existing switches and insert new compatible 3-pin or 5-pin mechanical switches.

Hot-Swap Switch Mechanism — Figure 8: Illustration of the hot-swap switch mechanism.

Maintenance

Cleaning Your Keyboard

General Cleaning: Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe down the keycaps and casing.
Deep Cleaning: For deeper cleaning, you can use a keycap puller to remove the keycaps. Clean the keycaps with warm, soapy water and allow them to dry completely before reattaching. Use compressed air to remove dust and debris from between the switches.
Avoid: Do not use harsh chemicals, abrasive cleaners, or spray liquids directly onto the keyboard. Ensure the keyboard is disconnected from power before cleaning.

Battery Replacement

If using disposable AAA batteries for wireless modes, replace them when the keyboard's performance degrades or the low battery indicator (if present) activates. Ensure correct polarity when inserting new batteries.

Troubleshooting

Problem	Possible Solution
Keyboard not responding in wireless mode.	Check if the connection mode switch is set correctly (BT or 2.4G). Ensure AAA batteries are installed correctly and have sufficient charge. For 2.4G, ensure the receiver is securely plugged into a USB port. Try re-pairing (Fn + P). For Bluetooth, ensure Bluetooth is enabled on your device and try re-pairing (Fn + Q/W/E). Try connecting via wired USB-C to confirm keyboard functionality.
Keys are not registering or double-typing.	Ensure the switches are fully seated in their sockets. If a specific switch is faulty, replace it using the hot-swap feature. Clean under the keycaps to remove any debris.
RGB lighting not working or stuck.	Ensure the keyboard is powered on. Try cycling through lighting modes and adjusting brightness using Fn key combinations. A factory reset (if available, check manufacturer's website) might resolve software glitches.
Keyboard not recognized in macOS.	Ensure the OS switch on the side of the keyboard is set to "MAC". Try reconnecting the keyboard (wired or wireless).

Specifications

Feature	Detail
Brand	IROK
Model	ZN 87
Keyboard Standard	87 Keys (Tenkeyless)
Connectivity	3-Mode: 2.4Ghz Wireless, Bluetooth, USB Wired (USB-C)
Operation Style	Mechanical
Switches	Hot-swappable
Keycap Material	ABS Plastic
Backlight Type	MULTICOLOR (RGB)
Wrist Support	No
Language	English
Application	Desktop, Laptop, Tablet
Power Source	Dual AAA batteries (for wireless), USB-C (for wired/power)
Dimensions (L x W x H)	40 cm x 17 cm x 7 cm (approximate)
Weight	1.5 kg (approximate)
Certification	FCC, WEEE

Gasket Structure Diagram — Figure 9: Diagram illustrating the keyboard's gasket-mounted structure.

Three-Layer Sound Absorbing Structure — Figure 10: Diagram of the three-layer sound absorbing structure.

Figure 11: Keycap profile illustration.

User Tips

No specific user tips were available from reviews or Q&A. However, general tips for mechanical keyboard users include:

Experiment with different switch types if you utilize the hot-swap feature to find your preferred typing feel.
Regularly clean your keycaps and under the keys to maintain optimal performance and hygiene.
Familiarize yourself with the Fn key combinations for quick access to multimedia and lighting controls.

Warranty and Support

For warranty information and technical support, please refer to the official IROK website or contact your retailer. Keep your proof of purchase for any warranty claims.

This device complies with FCC and WEEE regulations.

	FE75 PRO User Manual - iRok Keyboard User manual for the iRok FE75 PRO keyboard, detailing system requirements, connection modes, key functions, lighting effects, and troubleshooting.
	FL CMMI Keyboard MK870 User Guide Explore the features and functionalities of the FL CMMI Keyboard MK870 with this comprehensive user guide. Learn about WIN mode, key combinations, and software customization.
	AULA F87 Mechanical Keyboard User Manual User manual for the AULA F87 Mechanical Keyboard, detailing its 3-mode connectivity (USB Type-C, 2.4G, Bluetooth), anti-ghosting features, manual pairing process, charging indicators, and RGB lighting.
	Keychron C3 Pro Tenkeyless Mechanical Keyboard: Quick Start Guide and Specifications Comprehensive guide for the Keychron C3 Pro Tenkeyless Mechanical Keyboard, covering setup, VIA software, key layers, backlight controls, troubleshooting, and technical specifications.
	RK ROYAL KLUDGE S87 Mechanical Keyboard User Manual Comprehensive user manual for the RK ROYAL KLUDGE S87 Typewriter Mechanical Keyboard, covering packing list, wired mode, backlight customization, multimedia functions, and system compatibility for Windows and Mac.
	Tecware PHANTOM+ RGB Mechanical Keyboard Quick Start Guide A quick start guide for the Tecware PHANTOM+ RGB Mechanical Keyboard, detailing key features, multimedia functions, RGB controls, macro setup, switch replacement, package contents, system requirements, installation, and warranty information.

IROK ZN 87