JANGKLIFE USB Cordless Rotary Tool Kit Instruction Manual

1. Introduction

Thank you for choosing the JANGKLIFE USB Cordless Rotary Tool Kit. This versatile mini wireless drill is designed for various DIY tasks, including woodworking, engraving, polishing, drilling, and cutting on materials such as jewelry, metal, and glass. Its compact and portable design, combined with adjustable speed settings and a range of accessories, makes it an ideal tool for both professional craftsmen and amateur enthusiasts.

For a complete and detailed manual, please refer to the official User Manual (PDF).

2. Safety Warnings

2.1 General Power Tool Safety Warnings

Read all safety warnings and instructions provided. Failure to follow all warnings and instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.

Work Area Safety

• Keep the work area clean and well lit. Cluttered and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

⚠ Always check that the power supply corresponds to the voltage on the rating plate.

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Keep the cord away from heat, oil, sharp edges, or moving parts.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.

Personal Safety

• Stay alert, watch what you are doing, and use common sense when operating a power tool.
• Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
• Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used whenever conditions require will reduce personal injuries.
• Avoid accidental starting. Ensure the switch is in the off position before plugging in.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.

2.2 Additional Safety Instructions

• Before drilling holes or screwing into a wall, in case of doubt, check with a metal-/voltage detector that you are not breaking into an electricity, gas, or water supply line.
• Before you lay down the tool, make sure that all moving parts have come to a stop.
• Avoid frequent stalling when screwing or drilling, as this could damage the batteries.
• Do not let the power tool run overloaded to avoid damaging the tool and causing danger.
• During use, pay attention to the safety of people around to avoid harming others.
• When not using the power tool, it should be placed in a safe place to avoid children's access.

3. Product Overview

3.1 Components

Familiarize yourself with the parts of your JANGKLIFE Rotary Tool:

1. Shaft lock button
2. On/Off button
3. Speed control & charge indicator lights
4. Collet nut
5. Ventilation openings
6. Charging terminals
7. Tapered grip zone with soft grip
8. Charging Cable

3.2 What's in the Box

Your JANGKLIFE USB Cordless Rotary Tool Kit includes the main rotary tool, a USB charging cable, and a variety of accessories such as different grinding heads, cutting discs, sanding bands, and polishing felts. The specific accessories included depend on the purchased package, as shown in the product image.

4. Setup

4.1 Inserting a Bit or Drill

Follow these steps to correctly install a bit or drill into your rotary tool:

1. Press down the spindle locking button and unscrew the collet nut.
2. Choose the suitable collet and put the black nut.
3. Insert the bit you need, hold the lock button and screw on the nut tightly until secure.
4. Release the spindle locking button. Advise using a tissue to take it out for protecting your hands.

5. Operation

5.1 Charging the Tool

Before using the tool for the first time, charge it for 5 hours. The battery is incorporated into the handle and does not need to be removed for charging. Simply insert the charger plug into the charging socket and connect the charging unit to a 100-240V/50-60Hz power socket. The tool is equipped with a USB socket for charging, allowing for flexible charging via a power bank, computer USB interface, or a wall adapter.

5.2 Using the Tool

Once a bit is securely installed, place the tool bit firmly on the workpiece. Switch on the unit to rotate in the desired direction. Push the Forward/Reverse Switch to operate the tool. The tool is locked when the Forward/Reverse Switch is in the middle position.

5.3 Speed Control

The tool features speed control with indicator lights. You can adjust the rotational speed to 5000, 10000, or 15000 RPM to match the requirements of different grinding, carving, drilling, or cutting tasks.

5.4 Product Demonstration Video

6. Maintenance

6.1 Cleaning

Clean the tool housing with a damp cloth only. Do not use any solvents. Dry thoroughly afterwards.

6.2 Battery Maintenance

To maintain optimum battery capacity, we recommend completely discharging and recharging the battery every two months.

7. Troubleshooting

7.1 Common Issues & Solutions

• Tool not turning on: Ensure the battery is fully charged. If the tool has been stored for a long time, perform a full discharge and recharge cycle.
• Reduced performance: Recharge the battery. Ensure the correct bit is securely installed and not worn out.
• Overheating: Avoid running the tool overloaded. Ensure ventilation openings are clear. Allow the tool to cool down if it becomes hot.

7.2 User Tips

• The tool's built-in battery charges via a standard USB cable, offering convenience for charging with various USB power sources.
• This mini rotary tool is effective for delicate tasks, such as removing glue from cell phone covers or intricate engraving on small items.

8. Specifications

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Ensure to provide your purchase details for efficient assistance.