1. Product Overview
The SMAEL 8093 Sport Watch is a robust and versatile timepiece designed for active individuals. It combines analog and digital displays with multiple functions including a stopwatch, alarm, and backlight, all housed in a shock-resistant and 5Bar waterproof casing.
Key Features
- 5Bar Water Resistance: Suitable for daily use, including hand washing, rain, and swimming (do not press buttons underwater).
- Dual Time Display: Conveniently track two different time zones simultaneously.
- Shock Resistant: Engineered to withstand impacts and accidental drops.
- Alarm Clock Function: Set daily alarms for reminders.
- Chronograph (Stopwatch): Precise 1/100 second stopwatch with split functions.
- EL Backlight & Luminous Display: Ensures visibility in low-light conditions.
- Auto Date & Week Display: Automatically adjusts for date and day of the week.
Watch Components
Familiarize yourself with the watch's buttons and display areas:

Figure 1: Watch Components and Button Layout
- LIGHT (A) Button: Activates the EL backlight.
- MODE (B) Button: Cycles through different operational modes (Normal, Chronograph, Alarm, Time Setting).
- RESET (C) Button: Used for resetting values or continuing chronograph functions.
- START/STOP (D) Button: Used for starting/stopping chronograph, adjusting settings, and toggling alarm/chime.
- Crown: Used for adjusting the analog time.
2. Setup Instructions
Setting Analog Time
- Pull out the crown located on the right side of the watch.
- Rotate the crown to adjust the hour and minute hands to the desired time.
- Push the crown back in to secure the time setting.
Setting Digital Time and Date
- From the Normal Time Display Mode, press the MODE (B) button three times to enter the Time and Date Setting Mode. The seconds display will start flashing.
- Press the START/STOP (D) button to reset the seconds to zero.
- Press the RESET (C) button to move the flashing selection to the hours.
- Press the START/STOP (D) button to adjust the hour. Repeated presses will cycle through hours and also toggle between 12-hour and 24-hour formats.
- Press the RESET (C) button to move the flashing selection to the minutes.
- Press the START/STOP (D) button to adjust the minutes.
- Press the RESET (C) button to move the flashing selection to the month.
- Press the START/STOP (D) button to adjust the month.
- Press the RESET (C) button to move the flashing selection to the date.
- Press the START/STOP (D) button to adjust the date.
- Press the RESET (C) button to move the flashing selection to the day of the week.
- Press the START/STOP (D) button to adjust the day of the week.
- Once all settings are complete, press the MODE (B) button to exit the setting mode and return to the Normal Time Display.
Setting the Alarm
- From the Normal Time Display Mode, press the MODE (B) button twice to enter the Alarm Setting Mode. The alarm hour will start flashing.
- Press the START/STOP (D) button to adjust the alarm hour. Pay attention to AM/PM indicators if in 12-hour format.
- Press the RESET (C) button to move the flashing selection to the alarm minutes.
- Press the START/STOP (D) button to adjust the alarm minutes.
- Once the alarm time is set, press the MODE (B) button to exit the alarm setting mode.
Activating/Deactivating Alarm and Hourly Chime
- From the Normal Time Display Mode, press the MODE (B) button twice to enter the Alarm Mode.
- Press the START/STOP (D) button to toggle the alarm (ALM) and hourly chime (SIG) functions ON or OFF.
- If the "ALM" symbol appears, the alarm is ON. If the "SIG" symbol appears, the hourly chime is ON. If both appear, both are active.
3. Operating Instructions
Mode Switching
Press the MODE (B) button to cycle through the watch's functions in the following order:
- Normal Time Display
- Chronograph (Stopwatch) Mode
- Alarm Mode
- Time Setting Mode
EL Backlight
In any mode, press the LIGHT (A) button to illuminate the display for approximately three seconds.

Figure 2: Luminous Display
Using the Chronograph (Stopwatch)
- From Normal Time Display, press the MODE (B) button once to enter Chronograph Mode. The display will show '00:00:00'.
- Press the START/STOP (D) button to start the stopwatch.
- To pause the stopwatch, press the START/STOP (D) button again. Press START/STOP (D) again to resume.
- To record a split time (lap time) while the stopwatch is running, press the RESET (C) button. The display will show the split time, while the stopwatch continues to run in the background. Press RESET (C) again to return to the running stopwatch display.
- To stop the stopwatch, press the START/STOP (D) button.
- To reset the stopwatch to '00:00:00', press the RESET (C) button after stopping it.
Water Resistance Guidelines

Figure 3: 50M Water Resistance
The SMAEL 8093 watch is rated for 5Bar (50 meters) water resistance. This means it can withstand splashes, rain, and is suitable for showering and swimming in shallow water. However, it is crucial to NEVER press any buttons while the watch is submerged in water, as this can compromise the water seal and lead to internal damage.
4. Maintenance
General Care
- Clean your watch regularly with a soft, dry cloth to remove dirt and moisture.
- Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes.
- Keep the watch away from strong magnetic fields, which can affect its accuracy.
- If the watch comes into contact with salt water, rinse it thoroughly with fresh water and dry it immediately.
Water Resistance Precautions
- Always ensure the crown is fully pushed in after setting the analog time to maintain water resistance.
- Do not operate any buttons while the watch is wet or submerged in water.
Battery Replacement
The watch includes a battery. When the display dims, the backlight becomes weak, or functions become erratic, it may indicate a low battery. Battery replacement should ideally be performed by a professional watch repair service to ensure the water resistance seal is properly maintained.
5. Troubleshooting
Common Issues and Solutions
- Display is blank or dim: The battery may be low. Consider professional battery replacement.
- Digital time is inaccurate: Re-set the digital time and date following the instructions in Section 2.
- Analog time is inaccurate: Re-set the analog time by pulling out and rotating the crown.
- Buttons are unresponsive: Ensure the watch is not in a specific mode that locks button functions. If the issue persists, a low battery might be the cause.
- Water inside the watch: If you notice condensation or water droplets inside the watch, stop using it immediately and take it to a professional watch repair service. Do not attempt to dry it yourself, as this can cause further damage.
6. Specifications
Technical Specifications

Figure 4: Watch Functions and Parameters
| Attribute | Detail |
|---|---|
| Brand | SMAEL |
| Model Number | 8093 |
| Movement | Quartz, Digital (Jp origin) |
| Display Type | Analog-digital, Arabic Numeral Markers |
| Case Material | Plastic |
| Case Thickness | 22 mm |
| Case Width | 50 mm |
| Dial Diameter | 46 mm |
| Dial Window Material | Glass (Organic glass) |
| Band Material Type | PU (Sport Band) |
| Band Width | 22 mm |
| Band Length | 27 cm (Total strap length) |
| Clasp Type | Buckle |
| Water Resistance Depth | 5Bar (50M) |
| Features | Stop Watch, Back Light, Shock Resistant, LED Display, Luminous, Auto Date, Water-Resistance, Alarm, Swim, Week Display |
| Weight | 108 g |
| Wearing Range | 140 mm - 230 mm |
| Boxes & Cases Material | Paper |
| Origin | Mainland China |
| Battery Included | Yes |
7. User Tips
Helpful Hints for Optimal Use
- Dual Time Zone: If you travel frequently or communicate across different time zones, make full use of the dual time display feature to keep track of both local and home times.
- Active Lifestyle: The shock-resistant design makes this watch ideal for sports and outdoor activities. While durable, avoid intentionally subjecting it to extreme impacts.
- Low Light Visibility: Remember to use the EL backlight (button A) for quick time checks in dark environments. The luminous display also aids visibility.
- Alarm Reminders: Regularly check and update your alarm settings to ensure you don't miss important appointments or tasks.
- Water Contact: Always double-check that the crown is fully pushed in before any water exposure. Avoid pressing buttons underwater to prevent water ingress.
8. Warranty and Support
Warranty Information
This SMAEL 8093 Sport Watch comes with a standard manufacturer's warranty covering defects in materials and workmanship. Please retain your proof of purchase for any warranty claims. Specific warranty terms and conditions may vary by region and retailer.
Customer Support
For further detailed instructions, troubleshooting, or specific support inquiries, please refer to the official user manual PDF available at: SMAEL 8093 User Manual (PDF). You may also contact the seller or manufacturer directly for assistance.