JIKONG JK-PB2A16S15P

Contents

JIKONG BMS JK-PB2A16S15P + 4.3 Inch Display User Manual

Model: JK-PB2A16S15P

For LiFePO4, Li-ion, and LTO Battery Packs (8S-16S, 24V-48V)

1. Introduction

The JIKONG JK-PB2A16S15P is an intelligent Battery Management System (BMS) designed for large-capacity series lithium battery packs. It features voltage acquisition, high-current active balancing, overcharge, over-discharge, overcurrent, over-temperature protection, coulomb metering, Bluetooth communication, and host computer monitoring. This BMS is suitable for LiFePO4, ternary lithium, and lithium titanate battery types.

Key advantages include active balancing for good durability and stable performance, real-time active energy transfer equalization (patent ZL 2019 2 0479589.6), single voltage range 1V~5V with ±5mV equalization accuracy, and continuous balanced current of 2-10A to ensure battery consistency and extend battery life. It supports mobile phone Bluetooth communication via a dedicated APP (Android and iOS) for real-time battery status monitoring and parameter adjustment. The system also includes a 4.3-inch touch screen display for convenient information viewing.

JIKONG BMS JK-PB2A16S15P with 4.3-inch display and interface board
Figure 1.1: JIKONG BMS JK-PB2A16S15P with 4.3-inch Display and Interface Board.

2. Specifications

The JIKONG BMS JK-PB2A16S15P offers robust features for comprehensive battery management. Below are the detailed technical specifications:

Table of JIKONG Product Specifications for various BMS models
Figure 2.1: JIKONG Product Specifications for JK-PB1A16S-10P, JK-PB1A16S-15P, JK-PB2A16S-15P, and JK-PB2A16S-20P models.
Table 2.1: Main Parameters (JK-PB2A16S-15P)
ParameterValueUnit
Supply Voltage20-70V
Standby Power Consumption12mW
Operating Power Consumption1100mW
Operating Temperature-30 to 70°C
Max Number of Collection Strings16S
Max Balancing Current2A
Max Continuous Charging Current150A
Max Continuous Discharge Current150A
Max Instantaneous Current300A
Max Internal Loop Resistance0.45mΩ
Protective Plate Size300 x 100 x 18mm
Finished Weight1000g

The BMS is certified with CE, FCC, and WEEE standards.

3. Packing List

Upon unpacking, please handle the package gently and ensure all components are present and undamaged. The standard package for the JIKONG BMS JK-PB2A16S15P includes the following items:

Diagram showing the contents of the JIKONG BMS packing list
Figure 3.1: Visual representation of the packing list components.
  • BMS x 1
  • Interface board x 1
  • Adapter cable B x 1 (long 30cm)
  • Adapter cable A x 1 (long 30cm)
  • R545 Network cable x 1 (long 40cm)
  • Sampling line A x 2 (long 90cm)
  • Sampling line B x 1 (long 90cm)
  • Sampling line C x 1 (long 90cm)
  • Switch x 1 (long 50cm)
  • Adapter cable C x 1 (long 30cm)
  • Heating Adapter cable x 1 (long 15cm)
  • Adapter x 1

4. Installation and Wiring

The JIKONG BMS is suitable for 7-16 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always ensure proper connections to prevent damage.

4.1 General Precautions

  • Handle the protection board gently; do not invert it.
  • Before powering on, double-check that the balance cables are properly connected and that P- and B- terminals are correctly wired.
  • Ensure the protection board is securely fixed to the battery pack. Incorrect installation or wiring can lead to abnormal operation or severe damage.

4.2 Wiring Diagrams

The following diagrams illustrate the wiring methods for 16-string and 8-string cells. Please note that for 8-string cells, only the first B8 line needs to be connected; the second B8 cable is not required.

Wiring diagram for 16-string cells and 8-string cells for JIKONG BMS
Figure 4.1: Wiring methods for 16-string and 8-string battery cells.

4.3 Interface Board Connections

The interface board provides various connection points for communication, display, and control. Refer to the detailed pin definitions in the PDF manual for precise connections.

Diagram of JIKONG BMS interface board with labeled ports for communication and control
Figure 4.2: Interface board with communication ports (CAN, RS485) and other connections.

4.4 Device Activation

After confirming all connections are correct, power on the protection board. The BMS is designed for charging activation; connect a charger (with voltage 2V higher than battery voltage) to activate it. Alternatively, if you have the optional display screen and button, you can activate the device by inserting the cable into the display interface and pressing the button.

5. Operation

5.1 Mobile APP Installation and Usage

The JIKONG BMS supports mobile APP control for Android and iOS devices. Scan the QR code below to download the official APP. Android Version 7 or higher is required.

QR code for JIKONG BMS mobile APP download
Figure 5.1: Scan to download the JIKONG BMS Mobile APP.

Through the APP, you can:

  • View real-time battery status (voltage, current, temperature, SOC, alarms, cycles).
  • Modify protection parameters (e.g., overvoltage, undervoltage, overcurrent, over-temperature settings).
  • Control charge and discharge switches.
  • Select inverter communication protocols.
JIKONG BMS mobile app interface showing battery data
Figure 5.2: Multi-screen display and data connection via mobile APP, PC software, or dedicated display.

5.2 4.3-inch Touch Screen Display

The optional 4.3-inch touch screen display provides a convenient way to monitor battery information directly. It shows battery pack total voltage, output current, temperature, State of Charge (SOC), and various alarm/status indicators.

JIKONG 4.3-inch touch screen display showing battery voltage, current, SOC, and status
Figure 5.3: JIKONG 4.3-inch Touch Screen Display interface.

5.3 Active Equalization

The BMS employs active equalization to transfer energy from high-voltage cells to low-voltage cells, ensuring battery consistency. When the voltage difference between any two strings exceeds a set threshold, equalization automatically activates. The default balancing current is 1A/2A. It is recommended that the balancing current does not exceed 0.2C of the battery capacity. This feature significantly improves battery cruising range and delays aging.

Diagram illustrating active balancing (lossless balancing) in a battery pack
Figure 5.4: Active Balancing (Lossless Balancing) mechanism.

5.4 Heating Function

The BMS includes a heating function to warm the battery at low temperatures, preventing performance degradation. The designed heating current is 4A. This function can be controlled via the APP. It is recommended to use a temperature control switch (45°C to 65°C normally closed type) in series with the heating circuit as a secondary protection.

5.5 Dry Contact Function

Two dry contacts are provided to control external devices like alarms or fans. When the BMS detects an over-temperature, overcharge, or over-discharge state, the dry contacts can trigger an alarm or activate a cooling fan. You can select two trigger conditions via the APP.

Diagram of JIKONG Home Energy Storage BMS with features like intelligent communication and high efficiency balance
Figure 5.5: JIKONG Home Energy Storage BMS features.

5.6 Communication Functions

The BMS supports CAN and RS485 communication. The default CAN communication rate is 250K. Users can select the appropriate protocol in the APP based on their inverter brand. Two RS485 interfaces are available: RS485-1 for inverter communication and RS485-2 for parallel battery pack connection and upper computer communication. The default baud rate for RS485-2 is 115200. The communication address can be set using DIP switches (0-15).

Mobile app interface for selecting CAN protocols and a table of supported protocols
Figure 5.6: Protocol docking and mobile APP setup for inverter communication.

5.7 Intelligent Sleep

The intelligent sleep function allows the BMS to enter a low-power state when idle (charging/discharging current less than 1A for 26 consecutive hours) to reduce self-consumption. It can be reactivated by pressing the button or connecting a charger.

6. Maintenance

The JIKONG BMS is designed for durability and reliability. Regular maintenance involves ensuring proper environmental conditions and monitoring battery health through the display or APP.

6.1 Protection Features

The BMS integrates multiple protection mechanisms to safeguard your battery pack:

  • Overcharge Protection: Prevents battery damage from excessive charging voltage. The BMS will stop charging if any cell exceeds the set overcharge voltage and resume when all cells are below the recovery voltage.
  • Over-discharge Protection: Protects cells from deep discharge. The BMS will cut off discharge if any cell falls below the set undervoltage protection, resuming when charged above the recovery voltage. It also features an automatic shutdown voltage for critical low levels.
  • Overcurrent Protection (Charge/Discharge): Prevents damage from excessive current. If charging or discharging current exceeds the set limit for a specified delay, the BMS will interrupt the current flow and resume after a recovery time.
  • Over-temperature Protection: Monitors battery temperature during charge and discharge. If temperatures exceed safe limits, the BMS will halt the respective operation and resume when temperatures return to normal.
  • Low-temperature Protection: Prevents charging at dangerously low temperatures. If the temperature falls below the set low-temperature protection value, charging will stop and resume when the temperature rises above the recovery value.
  • Short Circuit Protection: Automatically detects and protects against short circuits. The BMS has a configurable delay and recovery time for short circuit events.
  • Emergency Switch: Provides a temporary override for 30 minutes in case of critical issues like over-temperature, over-discharge, or cell drop, allowing for emergency use.
  • Charge Current Limiting: Limits charging current to approximately 10A when overcurrent is detected during charging, protecting the battery.

7. Troubleshooting

Many common issues can be identified and resolved by checking the BMS status indicators and APP data. Refer to the LED descriptions and APP diagnostics for guidance.

7.1 LED Status Indicators

The BMS features LED indicators to provide quick status updates:

Table 7.1: LED Description (Partial)
StatusNormal/Alarm/ProtectionON/OFF IndicatorRUNALML1-L6Instructions
Power OffNormalOFFOFF
BalanceNormalONFlickerOFFBased on battery display
ChargingOvercurrent, Overtemp, Overvoltage, Charging FailureONFlickerFlickerBased on battery display
DischargeOvercurrent, Overtemp, Undervoltage, Discharge FailureONFlickerFlickerBased on battery display

For a complete list of LED indicators and their meanings, please refer to the full PDF manual.

7.2 Common Issues and Solutions

  • BMS not activating: Ensure all wiring is correct, especially P- and B- connections. Activate by connecting a charger or using the optional display button.
  • Battery not balancing: Check the APP settings for active equalization. Ensure the trigger voltage difference is set appropriately and the function is enabled.
  • Overcurrent/Overvoltage/Overtemperature protection triggering frequently: Review your battery pack's specifications and adjust the protection parameters in the APP accordingly. Ensure your charger and load are within the BMS's limits.
  • Communication issues (Bluetooth/CAN/RS485): Ensure the APP is updated and Bluetooth is enabled on your mobile device. For CAN/RS485, verify cable connections, baud rates, and selected protocols in the APP. Check DIP switch settings for RS485 address.

8. User Tips

  • Always perform initial setup and parameter adjustments in a controlled environment.
  • Regularly check the battery cell voltages via the APP or display to monitor overall health and balancing status.
  • For optimal battery longevity, avoid consistently operating at the extreme ends of charge/discharge cycles.
  • If using the heating function in cold climates, consider adding an external temperature switch for enhanced safety.
  • Keep the APP updated to ensure access to the latest features and bug fixes.

9. Warranty and Support

For detailed warranty information and technical support, please refer to the official JIKONG documentation. A comprehensive user manual in PDF format is available for download, which includes in-depth parameter settings and advanced configurations.

You can access the full user manual (PDF) here.

For further assistance, please contact JIKONG Official Store support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.