Jonsbo ZL-120

Contents

Jonsbo ZL-120 Series ARGB Case Fan Instruction Manual

Model: ZL-120 Series | Brand: Jonsbo

1. Product Overview

The Jonsbo ZL-120 series fans are 120mm ARGB (Addressable RGB) cooling fans designed for computer cases and radiators. They feature PWM (Pulse Width Modulation) for precise temperature control and vibrant ARGB lighting effects. The series includes both forward (ZL-120W/B) and reverse (ZL-120WR/BR) blade designs to optimize airflow direction.

Three Jonsbo ZL-120W ARGB fans in a 3-in-1 pack, showcasing wire-free splicing and vibrant lighting.
Jonsbo ZL-120W ARGB Fans (3-in-1 Pack)

2. Package Contents

Please check the package for the following items:

  • Jonsbo ZL-120 Series ARGB Fan(s) (quantity depends on purchase)
  • Mounting Screws
  • (Optional) ARGB Controller (if purchased as part of a kit)

3. Installation Guide

3.1 Physical Installation

  1. Determine Fan Placement: Identify the desired location for your fans within your PC case or on a radiator. Consider airflow direction (intake or exhaust) based on your system's cooling needs. The ZL-120 series offers both forward (ZL-120W/B) and reverse (ZL-120WR/BR) blade designs for flexible airflow management.
  2. Mounting Fans: Securely attach each fan to the case or radiator using the provided mounting screws. Ensure the fan is oriented correctly for your desired airflow.
  3. Wire-Free Splicing (for multiple fans): The ZL-120 series features a unique wire-free splicing design. Align the male and female connectors on the sides of adjacent fans and slide them together until they click into place. This creates a direct connection for both power and ARGB signals, reducing cable clutter. The connectors utilize 2-3μm gold-plated layers for enhanced durability and signal integrity.
Detailed diagram showing the wire-free splicing mechanism of Jonsbo ZL-120 fans, with upward and downward buckle structure.
Wire-Free Splicing Mechanism
Image demonstrating how multiple Jonsbo ZL-120 fans connect together using the wire-free splicing feature.
Connecting Multiple Fans via Splicing

3.2 Wiring Connections

  1. PWM Fan Connection (4-PIN): Connect the 4-PIN PWM cable from the fan (or the last fan in a spliced chain) to an available 4-PIN fan header on your motherboard. This allows for automatic fan speed control based on CPU or system temperature.
  2. ARGB Lighting Connection (3-PIN 5V): Connect the 3-PIN 5V ARGB cable from the fan (or the last fan in a spliced chain) to an available 3-PIN 5V ARGB header on your motherboard or a dedicated ARGB controller. Note: Ensure you connect to a 5V ARGB header, not a 12V RGB header, to prevent damage.
Image showing Jonsbo ZL-120 fans with ARGB lighting and logos for motherboard synchronization software like ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, and ASRock Polychrome Sync.
Motherboard ARGB Sync Compatibility
Demonstration of Jonsbo ZL-120 ARGB fan assembly and lighting effects.

4. Operating Instructions

4.1 Fan Speed Control

The 4-PIN PWM connector allows your motherboard to dynamically adjust the fan speed (800-1800 RPM) based on system temperature. This ensures efficient cooling when needed and quieter operation during lighter loads. You can typically configure fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.

4.2 ARGB Lighting Control

The 3-PIN 5V ARGB connection enables synchronization of lighting effects with compatible motherboards (ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) or external ARGB controllers. Use the respective software to customize colors, patterns, and brightness to match your system's aesthetic.

Close-up view of the Jonsbo ZL-120 fan showcasing its vibrant ARGB lighting effects.
Vibrant ARGB Lighting Effects

4.3 Airflow Direction

The ZL-120 series offers different blade designs for specific airflow needs:

  • Forward Blade (ZL-120W/B): Designed for standard air intake or exhaust, pushing air in the direction of the fan's front.
  • Reverse Blade (ZL-120WR/BR): Designed to reverse the airflow direction while maintaining the aesthetic appearance of the fan's front. Useful for specific case configurations or radiator setups where you want the 'show' side of the fan to face inwards but still act as an exhaust.
Diagram illustrating the airflow direction for both positive (forward) and reverse fan blades, showing air intake and outlet surfaces.
Fan Blade Airflow Direction (Positive and Reverse)

5. Maintenance

5.1 Cleaning

Regularly clean your fans to prevent dust buildup, which can reduce cooling performance and increase noise. Use compressed air or a soft brush to gently remove dust from the fan blades and frame. Ensure the system is powered off before cleaning.

5.2 Bearing and Longevity

The ZL-120 series fans utilize durable hydraulic bearings, designed for quiet, stable, and long-lasting operation with a Mean Time To Failure (MTTF) of over 40,000 hours at 25°C room temperature. The fans also incorporate 8 shock absorbers to reduce resonance and wear, contributing to their stability and efficiency.

Diagram highlighting the 8 shock absorbers located on the corners of the Jonsbo ZL-120 fan frame.
Fan with 8 Shock Absorbers
Diagram illustrating the internal structure of the hydraulic bearing used in Jonsbo ZL-120 fans, emphasizing quiet and long-lasting performance.
Hydraulic Bearings for Quiet Operation

6. Troubleshooting

  • Fan Not Spinning:
    • Check if the 4-PIN PWM connector is securely plugged into the motherboard fan header.
    • Ensure the fan header is enabled in your motherboard's BIOS/UEFI settings.
    • Verify that the power supply is functioning correctly.
  • ARGB Lighting Not Working/Incorrect Colors:
    • Confirm the 3-PIN 5V ARGB connector is securely attached to a compatible motherboard header or ARGB controller.
    • Crucially, ensure it is connected to a 5V ARGB header, NOT a 12V RGB header. Connecting to a 12V header will damage the LEDs.
    • Check your motherboard's ARGB software or controller settings to ensure the lighting is enabled and configured correctly.
    • If using multiple spliced fans, ensure the first fan in the chain is correctly connected to the ARGB source.
  • Fan Noise is Excessive:
    • Check for dust buildup on the fan blades and clean if necessary.
    • Ensure mounting screws are tightened properly to prevent vibrations.
    • Adjust fan speed settings in your motherboard's BIOS/UEFI or software to a lower RPM if temperatures allow.

7. Specifications

FeatureSpecification
Model NumberZL-120
Fan Size120mm (L) x 120mm (W) x 25mm (H)
Fan Speed800 - 1800rpm (±10%)
Air Flow9.63 - 60.35 CFM
Noise Level15.3 - 23.8 dB(A)
Fan Voltage12V
LED Voltage5V
Fan Current0.14A
LED Current0.85A
Fan Power1.68W
LED Power4.25W
Static Pressure0.68 - 2.21 mmH2O
MTTF≥ 40000 hours (Room Temp: 25℃)
Bearing TypeHydraulic Bearing
Power Interface4PIN PWM
ARGB Interface3PIN ARGB (5V)
Used ForCase, Radiator
CertificationsCE, RoHS
Diagram showing the dimensions of the Jonsbo ZL-120 fan: 120mm length, 120mm width, and 25mm height.
Fan Dimensions

8. User Tips

  • Optimal Airflow: When installing multiple fans, consider creating a balanced airflow path. Typically, front and bottom fans act as intake, while rear and top fans act as exhaust. Utilize the forward and reverse blade options to maintain a clean aesthetic while achieving desired airflow.
  • Cable Management: The wire-free splicing feature significantly reduces cable clutter. Plan your fan layout to take full advantage of this for a cleaner build.
  • Software Control: Explore your motherboard's BIOS/UEFI and ARGB software to fine-tune fan speeds and lighting effects for the best balance of performance and aesthetics.

9. Warranty and Support

Jonsbo products are manufactured to high-quality standards and are certified with CE and RoHS. For any technical assistance, warranty claims, or product-related inquiries, please contact the seller or Jonsbo customer support directly. Keep your proof of purchase for warranty validation.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.