Product Overview
The Yieryi YG-366S Smart Dual Water Timer is an intelligent solar-powered irrigation controller designed for automatic watering of plants, lawns, and gardens. It features a dual-port design, allowing for two separate watering zones, and is equipped with a built-in rechargeable battery and an adjustable solar panel for continuous power. This device aims to simplify watering tasks, conserve water, and ensure optimal plant growth.

Package Contents
- 1 x Yieryi YG-366S Smart Dual Water Timer
- 2 x Thread Reducers (for 3/4" or 1/2" faucets)
- 2 x 1/2" Male Garden Hose Threads
- 2 x Thread Seals
- 1 x User Manual (this document)

Setup
Unboxing and Initial Charge: Remove all components from the packaging. The device comes with a built-in 2000mAh rechargeable battery. While it features solar charging, an initial charge via the reserved Type-C port (located at the bottom of the product) is recommended for optimal performance, especially if the device has been stored for a long time or if direct sunlight is not immediately available.

Location of the rain sensor, Type-C charging port, and activated joints. Attaching to Faucet: The timer features a rotatable interface for quick and easy installation. Use the provided thread reducers if your faucet is 3/4" or 1/2" in size. Ensure a tight, leak-free connection. The water supply to the faucet must remain on for the timer to function correctly.

The water timer connected to a faucet, ready for use. Connecting Hoses: Connect your irrigation hoses or drip lines to the two outlets at the bottom of the timer. The outlets are compatible with standard 3/4" or 1/2" fittings.
Positioning the Solar Panel: The solar panel is reversible and can be adjusted to optimize its angle for direct sunlight exposure. This ensures year-round battery life. Position the timer in an area where the solar panel receives maximum sunlight.

The adjustable solar panel ensures continuous charging. Initial Activation (Child Lock): The product factory sets a child lock. If the product does not respond upon receipt, first press the child lock button for 4 seconds, then press the exit (ESC) button for 6 seconds to switch on the machine and unlock it.
Operating Instructions
The timer allows for setting up to four independent watering programs (P1, P2, P3, P4) across its two outlets (Zone A and Zone B).


Setting a Watering Program:
Access Program Settings: Press the 'SET' button to enter the programming mode. Use the 'A/B' button to select between Zone A and Zone B, and the arrow buttons (up/down) to navigate through settings.
Set Current Time: Adjust the current time using the arrow buttons and confirm with 'OK'.
Select Program (P1-P4): Choose one of the four available programs (P1, P2, P3, P4) for the selected zone.
Set 'How Long' (Watering Duration): Define the duration of each watering cycle. This can be set from 1 minute to 299 minutes.

Setting the 'How Long' (watering duration) for a program. Set 'How Often' (Watering Frequency): Specify how often the watering should occur. This can be set from 1 day to 30 days. You can also set specific days of the week or odd/even days for timed watering mode.

Setting the 'How Often' (watering frequency) for a program. Set Start Time: Define the specific time of day when the watering program should begin.
Set End Time (for Cyclic Mode): If using cyclic watering, set the end time for the cycle. This allows for intermittent irrigation within a defined period.
Confirm Settings: Press 'OK' to save each setting and move to the next, or 'ESC' to exit programming mode without saving changes to the current step.
Special Modes:
Cyclic Watering Mode: This mode allows for repeated watering cycles within a set period. You can define the start time, duration, interval, and end time for the cycles. This is useful for plants that require frequent, short bursts of water.
Timed Watering Mode: This mode allows for a fixed watering schedule. You can customize the start time, continuous watering time, and weekly watering cycle (e.g., odd/even days, every few days).
Rain Delay Function: The timer has a rain-sensitive area that can automatically stop watering on rainy days. You can also manually set a rain delay from 1 to 7 days. During a rain delay, the watering schedule is paused and automatically resumes after the delay period to prevent overwatering.
Manual Watering: To activate manual watering without disrupting the programmed schedule, click the designated button (often indicated by a water droplet icon). You can stop the water flow at any time by pressing the button again or 'ESC'.
Screen Lock Function: To prevent accidental changes to settings, especially by children, activate the screen lock function. When the screen lock is on, the buttons will not work. To unlock, refer to the initial activation steps (press child lock button for 4 seconds, then ESC for 6 seconds).

The screen lock function prevents accidental touching.
Maintenance
- Cleaning: Regularly check and clean the built-in metal filter to prevent blockages and ensure stable water flow.
- Battery Care: The solar panel is designed to maintain the built-in 2000mAh lithium battery. Ensure the solar panel is clean and free from obstructions to maximize charging efficiency. If the device is stored in a dark place for an extended period, use the Type-C charging port for a full charge.
- Winterization: In freezing conditions, disconnect the timer from the faucet and store it indoors to prevent damage from ice expansion.
- Water Pressure: The timer is suitable for water pressure between 0.3-8KG. Ensure your water system operates within this range for optimal performance and to prevent damage.
Troubleshooting
- Q: Why is the water valve out of little water?
- A: If you are using a gravity feed system, such as a rain barrel system, it may not provide sufficient pressure for the timer to operate effectively. The timer requires a certain level of water pressure (0.3-8KG) to function correctly. Gravity feed systems typically have low or no real pressure, which can result in low water output. Consider using a pump to increase pressure if using such a system.

Specifications
| Feature | Specification |
|---|---|
| Model Number | YG-366S |
| Product Name | Solar Water Valve Watering Timer Irrigator |
| Type | Garden Water Timers (analogue) |
| Material | Plastic |
| Display Type | LCD Display |
| Intelligent Timing | 4 groups of timer programs (P1, P2, P3, P4) |
| Watering Duration ('How Long') | 1 minute to 299 minutes |
| Watering Frequency ('How Often') | 1 day to 30 days |
| Water Pressure Range | 0.3 - 8 KG |
| Water Temperature Range | 1 - 60 ℃ |
| Power Supply | Solar + Built-in 2000mAh rechargeable lithium battery |
| Charging Port | Type-C (reserved) |
| Waterproof Rating | IPX5 |
| Weight (without box) | 370g |
| Product Dimensions | 120mm x 120mm x 48mm |
| Origin | Mainland China |

User Tips
- Child Lock Reminder: Remember the specific sequence to unlock the device if the child lock is active: press the child lock button for 4 seconds, then the ESC button for 6 seconds.
- Water Pressure is Key: Ensure your water source provides adequate pressure (0.3-8KG) for the timer to function correctly. Gravity-fed systems might require a booster pump.
- Optimize Solar Charging: Periodically check and clean the solar panel to ensure it's free from dirt or debris, maximizing its charging efficiency. Adjust its angle for optimal sun exposure.
- Seasonal Storage: During colder months, especially if temperatures drop below freezing, disconnect the timer and store it indoors to prevent damage.
- Regular Filter Checks: The built-in metal filter can get clogged over time. Inspect and clean it regularly to maintain consistent water flow and prevent issues.
Warranty and Support
The YIERYI brand is committed to quality and customer satisfaction. For any product-related inquiries, technical support, or warranty claims, please contact the seller or refer to the official YIERYI support channels. Keep your purchase records for warranty validation.