1. Introduction
The SPERAS T217 is an advanced LED flashlight designed for hunting, search, rescue, and other demanding outdoor lighting requirements. It is an updated version of the T1, featuring a high-performance S50 LED, an optimized structure, and an efficient driver design. The T217 delivers a maximum output of 1400 lumens and an impressive beam distance of 1400 meters, providing a powerful and focused beam for precise targeting. Its multifunctional Type-C port supports convenient charging and compatibility with a Type-C remote pressure switch for enhanced usability. Additionally, the innovative cameral filters design allows hunters to achieve red or green beams, adapting to various hunting scenarios.

2. Package Contents
Please check the box for the following items:
- 1 x SPERAS T217 Flashlight
- 1 x 21700 Battery Pack (10000mAh, LG cell)
- 1 x USB-C Charging Cable
- 1 x Holster
- 2 x Spare O-rings
- 1 x User Manual
Optional Accessories (may be included depending on kit purchased):
- 1 x USB-C Remote Pressure Switch
- Green/Red Filters
- 1 x Scope Mount

3. Specifications
| Feature | Specification |
|---|---|
| Model Number | T217 |
| Light Source | High Performance S50*1 LED bulbs |
| Max Output | 1400 lumens (Turbo) |
| Max Beam Distance | 1400 meters (Turbo) |
| Max Beam Intensity | 490,000 cd (Turbo) |
| Runtime (Turbo) | 3 hours 53 minutes |
| Runtime (Low) | 330 hours |
| Battery Source | 1 x 21700 Battery pack (suggested) or 2 x 21700 batteries |
| Charging | Type-C, 5V/2A |
| Charging Time | Approximately 5 hours |
| Impact Resistance | 1.5 meters |
| Waterproof Rating | IP68 (2 meters submersible) |
| Body Material | Aerospace 6061 Aluminum Alloy |
| Finish | Premium Type III Hard-anodizing |
| Lens | Double-sided AR coated tempered glass |
| Dimensions | 254mm (Length) x 63.6mm (Head) x 25.4mm (Tube) |
| Net Weight | 308.2g (excluding battery) |
| Wattage | 25W |
| Certification | CE, ROHS |
| Focal Length | Non-adjustable |
| Zoom | No |
| Switch Mode | High/Middle/Low |
| Support Dimmer | 5 - 8 Files |
| Function | Shock Resistant, Hard Light |

4. Setup
4.1 Battery Installation
- Unscrew the tail cap of the flashlight.
- Insert the provided 21700 battery pack with the positive (+) terminal facing towards the head of the flashlight.
- Screw the tail cap back on tightly to ensure proper contact and waterproof sealing.
4.2 Charging the Battery
The SPERAS T217 features a multifunctional Type-C charging port for convenient recharging.
- Locate the Type-C charging port on the flashlight body. It may be covered by a rubber flap for protection.
- Open the rubber flap to expose the port.
- Connect the provided USB-C charging cable to the flashlight's Type-C port and the other end to a 5V/2A USB power adapter (not included).
- The charging indicator light will show the charging status. A full charge typically takes about 5 hours.
- Once charging is complete, disconnect the cable and securely close the rubber flap to maintain the waterproof seal.

4.3 Attaching Optional Remote Pressure Switch
The T217 supports both new USB-C remote pressure switches and traditional remote pressure switches for tactical applications.
- If using a USB-C remote pressure switch, connect it directly to the Type-C port.
- If using a traditional remote pressure switch, replace the standard tail cap with the compatible remote pressure switch tail cap (if provided with your kit).
4.4 Installing Cameral Filters (Optional)
For hunting, red or green cameral filters can be used to change the beam color.
- Unscrew the bezel of the flashlight head.
- Place the desired red or green filter over the lens.
- Screw the bezel back on tightly.

5. Operating Instructions
5.1 Basic Operation (Tail Switch)
The 18mm big rubber tail button controls the primary ON/OFF function and quick strobe.
- Turn ON/OFF: Fully press the tail switch to turn the flashlight ON or OFF.
- Momentary ON: Half-press and hold the tail switch for momentary illumination. Release to turn off.
- Quick Strobe: From OFF, quickly half-press the tail switch twice to activate Strobe mode.
5.2 Mode Selection (Side Button)
The rubber side button provides a great tactile feel and controls the various output modes, including a memory function.
- Change Modes: With the flashlight ON, press the side button to cycle through the modes: Low → Medium → High → Turbo.
- Memory Function: The flashlight will remember the last used general mode (Low, Medium, High, Turbo) when turned off and will activate in that mode when turned back on.
- SOS Mode: With the flashlight ON, press and hold the side button for approximately 2 seconds to activate SOS mode. Press again to return to the previous general mode.
- Strobe Mode: With the flashlight ON, quickly double-press the side button to activate Strobe mode. Double-press again to return to the previous general mode.

5.3 Output Selections and Runtimes
The T217 offers four tactical output selections to meet various demands:
| Mode | Output (Lumens) | Runtime |
|---|---|---|
| Turbo | 1400lm | 3h 53min |
| High | 500lm | 7h 22min |
| Medium | 100lm | 40h 58min |
| Low | 10lm | 330h |

6. Maintenance
6.1 General Care
- Clean the flashlight body with a soft, damp cloth. Avoid abrasive cleaners.
- Keep the threads of the tail cap and head clean and lubricated with silicone grease to ensure smooth operation and maintain the waterproof seal.
- Store the flashlight in a cool, dry place when not in use for extended periods.
6.2 O-Ring Maintenance
The T217 is rated IP68 waterproof, meaning it can be submerged up to 2 meters. To maintain this rating:
- Regularly inspect the O-rings for any signs of wear, cracks, or damage.
- Replace damaged O-rings with the provided spares to ensure the waterproof seal.
- Lightly lubricate O-rings with silicone grease periodically.

6.3 Battery Care
- Always use the recommended 21700 battery pack or high-quality 21700 batteries.
- Charge the battery fully before first use and whenever the power indicator shows low battery.
- Do not over-discharge or overcharge the battery.
- If storing the flashlight for a long time, remove the battery to prevent potential leakage.
7. Troubleshooting
If you encounter issues with your SPERAS T217 flashlight, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on | Battery is dead or low Battery inserted incorrectly Loose tail cap Dirty contacts | Charge the battery fully Ensure battery is inserted with positive (+) terminal towards the head Tighten the tail cap Clean battery contacts and flashlight terminals with a clean cloth |
| Light flickers or turns off intermittently | Low battery Loose connections Overheating | Recharge or replace battery Ensure tail cap and head are tightened Reduce output mode to allow cooling; ensure proper ventilation |
| Cannot change modes | Side button malfunction Battery issue | Ensure side button is not obstructed; try a different battery If problem persists, contact customer support |
| Charging not working | Cable or adapter faulty Charging port obstructed Battery issue | Try a different USB-C cable and power adapter Ensure charging port is clean and free of debris Check battery for damage |
8. User Tips
- Optimal Performance: For maximum beam distance and output, ensure your 21700 battery is fully charged.
- Hunting Applications: Utilize the optional red or green filters to adapt to different hunting environments and avoid startling game.
- Tactical Use: Familiarize yourself with the quick strobe function via the tail switch for immediate tactical response.
- Waterproof Seal: Always ensure the Type-C charging port cover and tail cap are securely closed to maintain the IP68 waterproof rating, especially before exposure to water.
9. Warranty and Support
For warranty information, please refer to the specific terms and conditions provided by your retailer or the manufacturer at the time of purchase. Keep your proof of purchase for any warranty claims.
For technical support or further assistance, please contact the SPERAS customer service or your authorized dealer.