1. Safety Information
Please read this manual carefully before operating the device. Keep this manual for future reference.
- This device is for professional use only.
- Ensure the power supply matches the specified voltage (AC110-220V, 50-60Hz).
- Always disconnect from power before cleaning or servicing.
- Do not operate the device if the power cord is damaged.
- Maintain a minimum distance of 1 meter from flammable materials.
- Avoid direct eye exposure to the light source.
- Ensure proper ventilation to prevent overheating.
2. Product Overview
The YUER 200W LED Beam Spot Gobo Moving Head is a versatile lighting fixture designed for dynamic stage and event illumination. It features a powerful 200W LED light source, multiple patterns, colors, rainbow effects, and prism options.
Figure 2.1: Front view of the moving head light with display panel.
Figure 2.2: Rear view showing DMX and power connections.
3. Setup
3.1 Unpacking and Inspection
- Carefully remove the fixture from its packaging.
- Inspect the unit for any damage that may have occurred during transit. If damage is found, do not operate the device and contact the seller immediately.
- Ensure all components listed in the packing list are present.
3.2 Mounting
The fixture can be mounted in various positions (e.g., truss, floor) using appropriate clamps and safety cables (not included). Ensure the mounting surface or structure can support the weight of the fixture.
3.3 Power Connection
- Connect the power cable to the power input on the rear of the fixture.
- Plug the other end into a grounded power outlet (AC110-220V, 50-60Hz).
3.4 DMX Connection (Optional)
For DMX control, connect a DMX cable from your DMX controller's output to the DMX IN port on the fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on.
4. Operating Instructions
The fixture can be operated via several control modes: Voice Control, Master/Slave, Auto (Self-Row), and DMX.
4.1 Control Panel
The display panel on the front of the fixture allows for local control and setting adjustments. It typically includes a digital display and buttons such as MENU, UP, DOWN, and ENTER.
- MENU: Navigates through the main menu options.
- UP/DOWN: Adjusts values or scrolls through options.
- ENTER: Confirms selections.
- MIC: Built-in microphone for Sound Active mode.
4.2 DMX Mode
Set the DMX address using the control panel. The fixture supports 11 or 13 DMX channels, allowing for precise control over various functions including Pan, Tilt, Dimmer, Strobe, Color, Gobo, Prism, and Rainbow effects.
4.3 Master/Slave Mode
Connect multiple fixtures via DMX cables. Set one fixture as the 'Master' and the others as 'Slave'. The slave units will mirror the master's movements and effects.
4.4 Auto (Self-Row) Mode
Select an automatic program from the menu. The fixture will run through pre-programmed sequences of movements, colors, and gobos.
4.5 Voice Control Mode
Activate the voice control (sound active) mode. The fixture will react to ambient sound, synchronizing its effects with the music or audio.
Video 4.1: Demonstration of the YUER 200W LED Beam Spot Gobo Moving Head light's dynamic effects, including various colors, gobos, and movement patterns.
Figure 4.1: Examples of various light effects and patterns.
5. Maintenance
- Cleaning: Regularly clean the lenses and exterior casing with a soft, lint-free cloth. Do not use abrasive cleaners.
- Ventilation: Ensure ventilation openings are clear of dust and debris to maintain optimal cooling.
- Inspection: Periodically check all screws, connections, and cables for tightness and wear. Replace any damaged parts immediately.
- Storage: When not in use, store the fixture in a dry, dust-free environment.
6. Troubleshooting
- No Power: Check power cable connection, power outlet, and ensure the main power switch is on.
- No Light Output: Verify power, check if the dimmer is at 0%, or if the strobe is active. Ensure the fixture is not in a 'blackout' state.
- No DMX Control: Check DMX cable connections, DMX address settings, and ensure the DMX controller is functioning correctly. Try a different DMX cable.
- Erratic Behavior: Ensure proper DMX termination if using a long DMX chain. Check for stable power supply.
- Overheating: Ensure adequate ventilation and that no vents are blocked. Operate within specified ambient temperature ranges.
7. Specifications
Figure 7.1: Product dimensions.
| Feature | Specification |
|---|---|
| Brand Name | Yuer |
| Model Number | 200w Spot Beam Moving Head |
| Item Type | Stage Lighting Effect |
| Occasion | Professional Stage & DJ |
| Power (W) | 200W |
| Voltage | AC110-220V, 50-60Hz |
| Light Source | Integrated LED (Bulbs not included refers to traditional discharge lamps) |
| Luminous Flux | 249-2000 |
| Patterns | 12 patterns |
| Colors | 8 colors |
| Rainbow Effect | 6-color rainbow effect |
| Prism | 6+12 prism |
| Light Spot Angle | 2° |
| DMX Channels | 11/13ch |
| Control Modes | Voice control, Master/Slave, Auto, DMX |
| Pan (X-axis) | 540° |
| Tilt (Y-axis) | 180° |
| Packaging Size | 35cm x 26cm x 29cm |
| Gross Weight (single unit) | 3.5kg |
| Certification | CE |
| Origin | Mainland China |
8. User Tips
- For optimal performance, ensure the fixture is placed on a stable surface or securely mounted.
- Experiment with different DMX channel modes (11ch vs 13ch) to find the one that best suits your control needs.
- When using multiple units, setting them to Master/Slave mode can create synchronized and impressive light shows with minimal programming.
- Utilize the voice control mode for dynamic effects that react directly to music, enhancing the atmosphere of any event.
9. Warranty and Support
This product comes with a 1-3 year quality warranty. In case of any quality issues, please contact the seller directly for assistance. The seller has professional engineers dedicated to after-sales service.
