1. Introduction
The UGREEN M.2 NVMe SATA SSD Enclosure is a versatile external storage solution designed for M.2 NVMe and SATA solid-state drives. It supports high-speed data transfer rates of up to 10Gbps for NVMe SSDs and 6Gbps for SATA SSDs, utilizing the USB 3.2 Gen2 standard. This enclosure is compatible with both M Key and B&M Key M.2 SSDs, offering broad compatibility for various M.2 form factors. Its aluminum alloy body ensures efficient heat dissipation, while the included silicone case provides shock protection, making it a durable and portable option for expanding your storage.

Image: UGREEN M.2 NVMe SATA SSD Enclosure, highlighting 10Gbps speed and NVMe/SATA compatibility.
2. Product Features
- Dual Protocol Support: Compatible with both M.2 NVMe (PCIe) and M.2 SATA (NGFF) SSDs.
- High-Speed Transfer: Up to 10Gbps for NVMe SSDs (USB 3.2 Gen2) and 6Gbps for SATA SSDs.
- Wide SSD Compatibility: Supports M Key (NVMe/PCIe) and B&M Key (NGFF/SATA) M.2 SSDs. Note: B Key (NGFF/SATA) SSDs are not supported.
- Multiple SSD Sizes: Accommodates 2230, 2242, 2260, and 2280 form factors.
- Large Capacity Support: Supports M.2 SSDs up to 8TB.
- Efficient Heat Dissipation: Constructed with an aluminum alloy shell and includes a thermal pad for optimal cooling.
- Plug and Play: No drivers required for Windows, macOS, and Linux operating systems.
- Work LED Indicator: White light indicates standby/hibernate, flashing white light indicates data reading/writing.
- Shock-proof Protection: Comes with an extra silicone case to protect against scratches and impacts.
- Dual Cable Configuration: Includes both a USB-C to USB-C cable and a USB-A to USB-C cable for broad device compatibility.

Image: Diagram illustrating M.2 NVMe and SATA protocol compatibility, showing supported M&B Key and M Key SSDs, and unsupported B Key SSDs.

Image: Internal chip (RTL9210B) highlighting UASP, S.M.A.R.T, and TRIM features for fast and stable transmission.
3. Package Contents
Please check the box for the following items:
- UGREEN M.2 NVMe SATA SSD Enclosure (SSD Case)
- Silicone Protective Case
- USB-C to USB-C Cable (approx. 33cm)
- USB-A to USB-C Cable (approx. 33cm)
- Screwdriver
- Fixed Buckle
- Warranty Card
- User Manual

Image: Visual representation of the package contents, including the SSD case, silicone case, cables, screwdriver, and documentation.
4. Setup Instructions
Follow these steps to install your M.2 SSD into the enclosure:
- Take out the silicone cover: Gently remove the outer silicone protective cover from the enclosure.
- Unscrew the screw to open the cover: Use the provided screwdriver to loosen and remove the screw securing the enclosure's internal tray. Slide out the internal tray.
- Align the hard drive interface: Carefully insert your M.2 SSD into the M.2 slot on the internal tray, ensuring the notches align correctly.
- Fix hard drive by screw cap: Secure the M.2 SSD in place using the fixed buckle and screw.
- Affix the heat dissipation silicone sticker: Apply the included thermal pad/silicone sticker onto the SSD to ensure proper heat transfer to the aluminum casing.
- Completed installation: Slide the internal tray back into the aluminum shell and secure it with the screw. Finally, re-attach the silicone protective cover.

Image: Six-step visual guide demonstrating the installation process of an M.2 SSD into the enclosure.
5. Operating Instructions
Once your M.2 SSD is installed, operating the enclosure is straightforward:
- Connect to Device: Use one of the provided USB cables (USB-C to C or USB-A to C) to connect the enclosure to your laptop, desktop computer, or Type-C mobile phone.
- Plug and Play: The enclosure is plug-and-play compatible with Windows, macOS, and Linux systems. Your operating system should automatically detect the connected SSD.
- LED Indicator:
- A solid white light indicates the enclosure is in standby or hibernate mode.
- A flashing white light indicates that data is being read from or written to the SSD.
- Accessing Data: Once recognized, you can access the SSD like any other external drive to store, transfer, or retrieve files.

Image: The enclosure connected to a laptop and a Type-C mobile phone, demonstrating its versatility for mobile storage.

Image: Close-up of the enclosure showing the white LED indicator, explaining its states for standby/hibernate and data activity.
6. Maintenance
To ensure the longevity and optimal performance of your UGREEN M.2 SSD Enclosure:
- Keep Clean: Regularly wipe the exterior of the enclosure with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
- Use Silicone Case: Always use the provided silicone protective case to guard against scratches, minor bumps, and accidental drops.
- Proper Storage: Store the enclosure in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity when not in use.
- Handle with Care: Avoid dropping or subjecting the enclosure to strong impacts, as this can damage the internal SSD or the enclosure itself.
- Cable Management: Store the USB cables neatly to prevent kinks or damage.
7. Troubleshooting
If you encounter issues with your UGREEN M.2 SSD Enclosure, refer to the following common problems and solutions:
- Enclosure not recognized by computer:
- Ensure the USB cable is securely connected to both the enclosure and the computer.
- Try a different USB port on your computer.
- Test with a different USB cable.
- Verify that the M.2 SSD is correctly installed inside the enclosure and securely fastened.
- For new SSDs, ensure they are initialized and formatted in Disk Management (Windows) or Disk Utility (macOS).
- Slow transfer speeds:
- Ensure you are using a USB 3.2 Gen2 compatible port on your computer for optimal 10Gbps speeds. Older USB 2.0 or 3.0 ports will result in lower speeds.
- Confirm your M.2 SSD is an NVMe drive to achieve 10Gbps. SATA M.2 SSDs will operate at a maximum of 6Gbps.
- Check the integrity of the USB cable. A damaged cable can affect performance.
- Close other applications that might be using significant system resources.
- Enclosure feels hot during use:
- It is normal for the aluminum enclosure to become warm during heavy data transfer, as it is designed to dissipate heat from the SSD.
- Ensure the thermal pad/silicone sticker is correctly applied to the SSD during installation to facilitate heat transfer.
- Avoid placing the enclosure in enclosed spaces that restrict airflow.
- M.2 SSD does not fit into the enclosure:
- Verify that your M.2 SSD is either an M Key (NVMe/PCIe) or B&M Key (NGFF/SATA) type. B Key (NGFF/SATA) SSDs are not compatible with this enclosure.
- Ensure your SSD is one of the supported sizes: 2230, 2242, 2260, or 2280.
8. Specifications
| Attribute | Value |
|---|---|
| Brand | UGREEN |
| Model Name | M.2 NVME SATA Dual Protocol Case |
| Model Number | CM559/90408 |
| Supported SSD Protocols | M.2 NVMe (PCIe) / M.2 SATA (NGFF) |
| Supported SSD Keys | M Key, B&M Key |
| Supported SSD Sizes | 2230, 2242, 2260, 2280 |
| Max. Supporting Hard Drive Capacity | 8TB |
| Built-in Interface | M.2 M Key |
| USB Standard | USB 3.2 Gen2 |
| Transmission Rate | 10Gbps (NVMe), 6Gbps (SATA) |
| Case Material | Aluminum Alloy |
| Product Weight | 126g |
| Dimensions (approx.) | 123mm (L) x 38mm (W) x 12.5mm (H) |
| Operating System Compatibility | Windows, macOS, Linux |

Image: Diagram showing the dimensions of the enclosure: 123mm length, 38mm width, 12.5mm height.

Image: Visual representation of compatibility with Mac OS, Windows, and Linux operating systems.
9. User Tips
- Initial SSD Preparation: For brand new M.2 SSDs, you will need to initialize and format them through your operating system's disk management tools before they can be used.
- Optimal Performance: To achieve the maximum 10Gbps transfer speed, ensure your host device (computer, laptop) has a USB 3.2 Gen2 compatible port and you are using an NVMe M.2 SSD with the provided USB-C to USB-C cable.
- Data Safety: Always safely eject the external drive from your operating system before disconnecting the enclosure to prevent data corruption.
- Heat Management: While the aluminum casing is designed for heat dissipation, prolonged heavy use can still generate warmth. Ensure adequate airflow around the enclosure.
10. Warranty and Support
UGREEN provides the following warranty and support for this product:
- 1-Year Warranty: All UGREEN products purchased from authorized channels come with a 1-year warranty. Please retain your proof of purchase for warranty claims.
- 24-Hour Online Service: UGREEN offers 24-hour online customer service. For any inquiries or support needs, please contact UGREEN customer support.
11. Product Video Overview
Watch this official video for a quick overview of the UGREEN M.2 NVMe SATA SSD Enclosure's features and design.
Video: Official UGREEN product video showcasing the M.2 NVMe SATA SSD Enclosure, its aluminum alloy body, fast transfer speeds, heat dissipation, and large capacity support.