SkyBeats TG505 Mini Portable Bluetooth Speaker

Introduction

Thank you for purchasing the SkyBeats TG505 Mini Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it carefully before use and keep it for future reference.

Safety Information

• Do not expose the speaker to extreme temperatures, direct sunlight, or humidity.
• Avoid dropping or subjecting the speaker to strong impacts.
• Keep the speaker away from water and other liquids.
• Do not attempt to disassemble or repair the speaker yourself. Contact qualified personnel for service.
• Use only the specified charging voltage and current to prevent damage.

Package Contents

• 1x TG505 Mini Portable Bluetooth Speaker
• 1x USB Data Cable
• 1x English Manual
• 1x Original Box

Product Overview

Familiarize yourself with the speaker's components and controls:

Key Controls and Ports:

• Power Switch: Long press to turn on/off.
• Mode Button (M): Short press to switch between modes (Bluetooth, FM, TF Card, USB, AUX).
• Volume Down / Previous Track: Short press for previous track, long press for volume down.
• Volume Up / Next Track: Short press for next track, long press for volume up.
• Play/Pause / FM Scan / Call Control: Short press to play/pause in music mode, short press to scan in FM mode, short press to answer/end calls, double-click to redial.
• TF Card Slot: Insert a TF (MicroSD) card for MP3 playback.
• USB Port: Insert a USB flash drive for MP3 playback.
• AUX Input: 3.5mm jack for connecting external audio devices.
• DC 5V Charging Port: Micro USB port for charging the speaker.

Setup

1. Charging the Speaker: Before first use, fully charge the speaker. Connect the provided USB data cable to the DC 5V charging port on the speaker and the other end to a USB power source (e.g., computer, USB wall adapter). The charging indicator will show the charging status and turn off when fully charged. Charging time is approximately 2-3 hours.
2. Power On/Off: Long press the Power Switch to turn the speaker on or off.

Operating Instructions

1. Bluetooth Pairing

1. Turn on the speaker. It will automatically enter Bluetooth mode, indicated by a flashing light and a prompt tone.
2. Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
3. Search for available Bluetooth devices and select "TG505" from the list.
4. Once paired, the speaker will emit a confirmation tone, and the indicator light will stop flashing. You can now play music from your device through the speaker.

2. FM Radio Mode

1. Turn on the speaker and short press the Mode (M) button until you hear the FM radio prompt.
2. To improve signal reception, connect the USB charging cable to the DC 5V port; it acts as an antenna.
3. Short press the Play/Pause button to automatically search for and save available radio stations.
4. Use the Previous/Next Track buttons to switch between saved stations.

3. TF Card / USB Drive Playback

1. Insert a TF (MicroSD) card or a USB flash drive (formatted to FAT32) containing MP3 audio files into the respective slot/port.
2. The speaker will automatically detect the storage device and begin playing music. If not, short press the Mode (M) button to switch to TF Card or USB mode.
3. Use the Play/Pause, Previous Track, and Next Track buttons to control playback.

4. AUX Input Mode

1. Connect one end of a 3.5mm audio cable (not included) to the AUX port on the speaker and the other end to the audio output of your external device (e.g., computer, MP3 player).
2. Short press the Mode (M) button until you hear the AUX mode prompt.
3. Control music playback from your external device.

5. TWS (True Wireless Stereo) Function

The TWS function allows you to pair two TG505 speakers together for a stereo sound experience.

1. Ensure both TG505 speakers are powered on and in Bluetooth mode, but not connected to any mobile device.
2. On one of the speakers, long press the Mode (M) button for 2-3 seconds. You will hear a prompt tone.
3. The speakers will automatically connect to each other. One speaker's indicator light will stop flashing, indicating successful TWS pairing.
4. Now, connect your mobile device to the primary speaker (the one whose light stopped flashing) via Bluetooth as described in the "Bluetooth Pairing" section.
5. Both speakers will now play audio in stereo.

6. Call Handling

When the speaker is paired with your mobile phone via Bluetooth:

• Answer Call: Short press the Play/Pause button when an incoming call rings.
• End Call: Short press the Play/Pause button during a call.
• Redial Last Number: Double-click the Play/Pause button.

Specifications

Maintenance

• Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Store the speaker in a cool, dry place when not in use.
• Avoid prolonged exposure to direct sunlight or high temperatures, which can shorten battery life.
• Charge the speaker regularly, even if not in use, to maintain battery health.

Troubleshooting

Speaker does not turn on:

Ensure the speaker is charged. Connect it to a power source and try again.

No sound:

Check the volume level on both the speaker and your connected device. Ensure the correct mode (Bluetooth, AUX, TF, USB) is selected. If using Bluetooth, ensure it's properly paired.

Bluetooth pairing fails:

Make sure the speaker is in Bluetooth pairing mode (flashing light). Ensure your device's Bluetooth is on and within 10 meters. Turn off and on both devices and try pairing again. Disconnect from any other Bluetooth devices.

Poor FM radio reception:

Ensure the USB charging cable is connected to act as an antenna. Try repositioning the speaker or the cable for better signal.

TF card/USB drive not playing:

Ensure the card/drive is inserted correctly and contains MP3 files. Verify that the card/drive is formatted to FAT32. Try a different card/drive.

User Tips

• For optimal FM radio reception, always connect the USB charging cable to the speaker, as it functions as an external antenna.
• When using TF cards or USB flash drives, ensure they are formatted to FAT32 for proper recognition and playback.
• To conserve battery, the speaker will automatically shut down after 30 minutes if there is no wireless connection.

Warranty and Support

This product is covered by a standard manufacturer's warranty. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related inquiries.