Introduction
Thank you for choosing the X96 TWS Bluetooth Headphones. These wireless earphones are designed to provide a high-quality audio experience with features like Bluetooth 5.3 connectivity, an LED digital display for battery status, and effective noise reduction. The comfortable ear hook design ensures a secure fit for extended wear. This manual will guide you through the setup, operation, and maintenance of your new headphones.
Setup
1. Charging the Headphones and Charging Case
Before first use, fully charge your X96 TWS headphones and their charging case.
- Place the earbuds into the charging case.
- Connect the charging case to a power source using a compatible USB cable.
- The LED digital display on the charging case will show the battery percentage, indicating the charging status. A full charge is indicated by '100' on the display.
The charging case has a capacity of 400 mAh. The earbuds offer approximately 6.5 to 8 hours of single-ear endurance, and the charging case provides up to 24-28 hours of total endurance, allowing for about 5 full charges of the earbuds.
2. Wearing the Headphones
The X96 TWS headphones feature an ear hook style for comfortable and secure wear.
- Identify the left (L) and right (R) earbuds.
- Gently place each earbud into your ear canal and adjust the ear hook over your ear until it feels snug and comfortable. The skin-friendly silicone open design ensures comfort without tiring your ears.
3. Bluetooth Pairing
The X96 TWS headphones utilize Bluetooth 5.3 for stable and long-distance transmission.
- Open the charging case. The earbuds will automatically power on and enter pairing mode.
- On your device (e.g., smartphone), go to Bluetooth settings and turn on Bluetooth.
- Search for available devices and select "X96 TWS" from the list.
- Once connected, you will hear a confirmation tone, and the earbuds will be ready for use.
Operating Instructions
The X96 TWS headphones feature intuitive touch controls for easy management of your audio and calls.
| Function | Action |
|---|---|
| Pause/Play | Double-click the left or right earbud |
| Next Song | Three-clicks the right earbud |
| Previous Song | Three-clicks the left earbud |
| Answer/Hang Up Call | Double-click |
| Volume Up | Click the right earbud |
| Volume Down | Click the left earbud |
| Power On/Off | Long press for 2 seconds |
| Voice Control (Siri/Google Assistant) | Long press for 2 seconds |
LED Digital Display
The charging case features an LED digital display that shows the current battery level of the case, allowing you to monitor charging status and remaining power at a glance.
Maintenance
Cleaning
- Use a soft, dry, lint-free cloth to clean the earbuds and charging case.
- Do not use abrasive cleaners, solvents, or aerosol sprays.
- Avoid getting moisture in any openings.
Storage
- When not in use, store the headphones in their charging case to protect them from dust and damage.
- Store in a cool, dry place away from extreme temperatures.
Troubleshooting
- Headphones not pairing: Ensure both earbuds are in the charging case, then open the lid to activate pairing mode. Make sure Bluetooth is enabled on your device and try searching again. If issues persist, try forgetting the device in your phone's Bluetooth settings and re-pairing.
- No sound from one earbud: Place both earbuds back into the charging case, close the lid, wait a few seconds, then open it again. This often re-syncs the earbuds. Check your device's audio balance settings.
- Charging issues: Ensure the charging cable is securely connected to both the case and the power source. Check if the charging contacts on the earbuds and inside the case are clean and free of debris.
- Poor sound quality or disconnections: Ensure your device is within the Bluetooth range (typically up to 10 meters/33 feet) and there are no major obstructions. Reduce interference by moving away from other wireless devices.
- Controls not responding: Ensure the earbuds are properly seated in your ears. Try cleaning the touch sensor areas. A quick reset by placing them in the case and taking them out can often resolve minor glitches.
Specifications
| Feature | Detail |
|---|---|
| Material | Plastic |
| Category | Earphones & Headphones |
| Wireless Type | Bluetooth |
| Bluetooth Version | 5.3 |
| Communication | Wireless |
| Style | Ear Hook |
| Vocalism Principle | Balanced Armature |
| Active Noise-Cancellation | Yes |
| Volume Control | Yes |
| Control Button | Yes |
| Charging Case Capacity | 400 mAh |
| Single Earbud Endurance | 6.5 - 8 hours |
| Total Endurance (with case) | 24 - 28 hours |
| Dynamic Drive Unit | 14.2mm |
| Call Noise Reduction | Dual microphone directional radio technology |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 13 cm x 8 cm x 3 cm |
| Package Weight | 0.1 kg |
User Tips
- Compatibility: While optimized for Xiaomi and Huawei phones, these headphones use standard Bluetooth 5.3 and should be compatible with most Bluetooth-enabled devices, including iPhones, for basic audio and call functions.
- Optimal Sound: For the best sound experience, ensure the earbuds are properly seated in your ears to create a good seal. The directional sound transmission is designed to provide high sound quality without leakage.
- Call Clarity: The dual microphone directional radio technology significantly enhances call clarity by filtering out background noise. For best results, ensure the microphones are not obstructed during calls.
Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or retailer from whom you purchased the X96 TWS Bluetooth Headphones. Please retain your proof of purchase for warranty service.
