ZALMAN GigaMax III 850W

Contents

ZALMAN GigaMax III 850W Power Supply User Manual

80 PLUS BRONZE Certified, Modular ATX3.1 (PCIe5.1)

1. Introduction

Thank you for choosing the ZALMAN GigaMax III 850W Power Supply. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new power supply unit (PSU). Please read this manual thoroughly before installation to ensure safe and optimal performance.

The ZALMAN GigaMax III 850W is an 80 PLUS BRONZE certified modular power supply, designed to meet the demands of modern computing systems with ATX3.1 and PCIe5.1 compatibility, including a dedicated 12VHPWR connector for high-performance graphics cards.

2. Product Overview

2.1 Key Features

  • 80 PLUS BRONZE Certified: Ensures high power efficiency, reducing heat and operating costs.
  • ATX3.1 & PCIe5.1 Ready: Fully compliant with the latest ATX and PCIe standards, featuring a native 12VHPWR connector for next-generation GPUs.
  • Modular Cable System: Allows for cleaner builds and improved airflow by using only the necessary cables.
  • 120mm HDB Fan: Equipped with a Hydraulic Dynamic Bearing fan for quiet operation and extended lifespan.
  • DC-to-DC Converter: Provides stable voltage output for reliable system performance.
  • Japanese 105°C Capacitor: Utilizes high-quality Japanese capacitors for enhanced durability and stability.
  • Comprehensive Protection Circuits: Includes Over Voltage Protection (OVP), Over Power Protection (OPP), Short Circuit Protection (SCP), Over Current Protection (OCP), Under Voltage Protection (UVP), and Over Temperature Protection (OTP).
  • Flat Cables: Designed with flat cables for easier routing and improved aesthetics.

2.2 Package Contents

  • ZALMAN GigaMax III 850W Power Supply Unit
  • Modular Cable Set
  • AC Power Cord
  • Mounting Screws
  • User Manual (this document)

2.3 Visual Overview

ZALMAN GigaMax III 850W Power Supply front view

Figure 1: ZALMAN GigaMax III 850W Power Supply (Front/Side View)

ZALMAN GigaMax III 850W Power Supply with modular cables

Figure 2: ZALMAN GigaMax III 850W Power Supply with Modular Cables

ZALMAN GigaMax III 850W Power Supply fan view

Figure 3: ZALMAN GigaMax III 850W Power Supply (Fan View)

3. Setup Instructions

Before proceeding with the installation, ensure your computer is completely powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

3.1 Installing the Power Supply

  1. Open your computer case. Refer to your case's manual for specific instructions.
  2. Locate the PSU mounting area, usually at the bottom or top rear of the case.
  3. Carefully slide the ZALMAN GigaMax III 850W PSU into the designated slot.
  4. Align the screw holes on the PSU with those on the case.
  5. Secure the PSU using the provided mounting screws.

3.2 Connecting Modular Cables

The ZALMAN GigaMax III 850W features a modular design, allowing you to connect only the cables you need. Refer to the diagram below for connector types and their corresponding ports on the PSU and your components.

ZALMAN GigaMax III 850W Power Supply cable connection diagram and features

Figure 4: Detailed overview of ZALMAN GigaMax III 850W features, connectors, and cable types.

  1. Main Power (20+4 Pin ATX): Connect the 24-pin main power cable to the corresponding port on your motherboard. Ensure both the 20-pin and 4-pin sections are securely latched.
  2. CPU Power (4+4 Pin EPS): Connect one or two 4+4 pin CPU power cables to the EPS 12V ports on your motherboard. Most motherboards require at least one 8-pin connection.
  3. PCIe Power (6+2 Pin): For graphics cards requiring 6-pin or 8-pin PCIe power, connect the appropriate 6+2 pin cables. The GigaMax III 850W provides four 6+2 pin connectors across two cables.
  4. PCIe Power (12VHPWR): For graphics cards with a 12VHPWR connector (PCIe 5.1), use the dedicated 12VHPWR cable. Ensure it is fully seated and latched to prevent power delivery issues.
  5. SATA Power: Connect SATA power cables to SSDs, HDDs, and optical drives. The PSU provides eight SATA connectors across two cables.
  6. Peripheral Power (Molex): Connect peripheral power cables to older devices or fan controllers that use Molex connectors. The PSU provides four peripheral connectors on one cable.
  7. Ensure all cables are firmly connected to both the PSU and the components. Avoid excessive force.
  8. Organize cables for optimal airflow and aesthetics using cable ties or routing channels in your case.

4. Operating Instructions

Once all components are installed and cables are connected:

  1. Ensure the power switch on the back of the PSU is in the "OFF" (0) position.
  2. Connect the AC power cord to the PSU and then to a wall outlet or surge protector.
  3. Flip the power switch on the back of the PSU to the "ON" (I) position.
  4. Press the power button on your computer case to start your system.

The 120mm HDB fan will operate automatically, adjusting its speed based on the PSU's load and temperature to maintain optimal cooling and quiet operation.

5. Maintenance

Proper maintenance ensures the longevity and stable operation of your power supply.

  • Cleaning: Periodically clean the exterior of the PSU and the fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and internal components. Always power off and unplug the PSU before cleaning.
  • Airflow: Ensure your computer case has adequate airflow to prevent the PSU from overheating. Keep the intake and exhaust vents clear of obstructions.
  • Cable Management: Good cable management not only improves aesthetics but also enhances airflow, contributing to better cooling for all components, including the PSU.

Warning: Do not open the power supply casing. High voltages are present inside, even when unplugged, and can cause severe injury or death. Opening the casing will also void your warranty.

6. Troubleshooting

If you encounter issues with your ZALMAN GigaMax III 850W power supply, refer to the following common problems and solutions:

ProblemPossible CauseSolution
System does not power on.
  • PSU power switch is OFF.
  • AC power cord is loose or disconnected.
  • Main power (24-pin) or CPU power (EPS) cable is not properly connected.
  • Faulty wall outlet or power strip.
  • PSU protection circuit activated.
  • Ensure PSU switch is in "ON" (I) position.
  • Check AC power cord connection at both PSU and wall outlet.
  • Verify all modular cables are securely connected to both PSU and components.
  • Test with a different wall outlet or power strip.
  • Unplug PSU for 5 minutes, then reconnect and try again. If issue persists, contact support.
System powers on but shuts down immediately.
  • Overload (OPP) or Over Temperature (OTP) protection activated.
  • Short circuit (SCP) detected.
  • Faulty component.
  • Ensure total power draw does not exceed 850W.
  • Check for proper cooling and clear any obstructions around the PSU fan.
  • Inspect all connections for potential short circuits.
  • Test components individually if possible.
System is unstable or crashes frequently.
  • Insufficient power delivery.
  • Loose cable connections.
  • Faulty PSU or other component.
  • Verify all power connections are secure.
  • Ensure your system's power requirements do not exceed 850W.
  • Monitor system voltages using motherboard software.
  • If issues persist, consider testing the PSU with another system or contacting support.

If troubleshooting steps do not resolve the issue, please contact ZALMAN customer support or your retailer.

7. Specifications

FeatureDetail
Model NameZALMAN GigaMax III 850W
Wattage850W
Efficiency Certification80 PLUS BRONZE
Form FactorATX
ATX VersionATX3.1
PCIe VersionPCIe5.1 (with 12VHPWR connector)
ModularYes (Full Modular)
Fan Type120mm Hydraulic Dynamic Bearing (HDB)
CapacitorsJapanese 105°C Main Capacitor
RGB SupportNo RGB
Protection FeaturesOVP, OPP, SCP, OCP, UVP, OTP
Dimensions (L x W x H)140mm x 150mm x 86mm
OriginMainland China

7.1 DC Output Table

RailMax CurrentMax Wattage
+3.3V20A120W (Combined)
+5V20A
+12V70.8A849.6W
-12V0.3A3.6W
+5VSB3A15W
Total Output Power850W

7.2 Cable Configuration

Cable TypeQuantityConnectors per CableTotal ConnectorsLength (approx.)
Main Power (20+4 Pin ATX)111600mm
CPU Power (4+4 Pin EPS)212650mm
PCIe Power (6+2 Pin)224550+100mm
PCIe Power (12VHPWR)111600mm
SATA Power248500+100+100+100mm
Peripheral Power (Molex)144500+100+100+100mm

8. Warranty & Support

For warranty information and technical support, please refer to the official ZALMAN website or contact your local retailer. Keep your proof of purchase for warranty claims.

Do not attempt to repair the power supply yourself, as this may cause further damage and will void the warranty.

9. User Tips

Based on general user feedback for power supplies:

  • Cable Management: Take your time with cable management. Proper routing not only makes your build look cleaner but also significantly improves airflow within your case, which can help with overall system cooling and PSU longevity.
  • Test Before Finalizing: Before fully securing all components and closing your case, perform a quick power-on test to ensure all connections are correct and the system boots up.
  • Power Requirements: Always ensure your PSU's wattage is sufficient for all your components, especially high-power graphics cards and CPUs. The 850W capacity of this unit is suitable for many high-end systems.

Note: No specific user tips were available from the provided reviews or Q&A data. The tips above are general recommendations for PSU installation.

10. Frequently Asked Questions (FAQ)

No specific FAQ content was available from the provided data.

For common questions, please refer to the troubleshooting section or contact ZALMAN customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.