SK SK-102

Contents

SIKO SK-102 Fume Extractor User Manual

Model: SK-102 | Brand: SK

1. Introduction

The SIKO SK-102 Fume Extractor is a compact and powerful desktop device designed to absorb and purify harmful fumes and smoke generated during soldering, phone repair, and other similar tasks. Featuring a 150W high-power fan, multi-layer filtration, and an integrated LED light, it provides a cleaner and safer working environment. This manual provides essential information for the safe and efficient operation and maintenance of your SK-102 Fume Extractor.

SIKO SK-102 Fume Extractor with 150W High Power and LED Light

Figure 1: SIKO SK-102 Fume Extractor with 150W High Power and LED Light.

2. Safety Instructions

Please read and understand all safety instructions before using the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always ensure the power supply matches the voltage requirements of the device (110V or 220V).
  • Do not operate the device in wet conditions or near flammable liquids or gases.
  • Keep the air inlet and outlet clear of obstructions to ensure proper airflow and prevent overheating.
  • Do not disassemble or modify the device. Refer all servicing to qualified personnel.
  • Unplug the device from the power outlet before cleaning or performing any maintenance.
  • Keep out of reach of children.
  • Use only original or approved replacement filters.

3. Package Contents

Verify that all items are present in the package:

  • SIKO SK-102 Fume Extractor Unit
  • Flexible Fume Extraction Hose with Hood
  • Power Adapter
  • Filter Set (Pre-filter, Activated Carbon Filter, HEPA Filter)
  • User Manual (this document)
SIKO SK-102 Fume Extractor with included filter set

Figure 2: Fume Extractor unit and filter components.

4. Product Features

The SIKO SK-102 Fume Extractor is equipped with several advanced features for optimal performance:

  • High-Power Fume Extraction: 150W motor for efficient smoke and fume absorption.
  • Integrated LED Light: Strong, hidden LED light source provides ample illumination for comfortable operation without eye strain.
    SIKO SK-102 Fume Extractor with LED light illuminated

    Figure 3: Integrated LED light for enhanced visibility.

  • Multi-Layer Filtration System: Effectively captures particles and absorbs harmful gases.
    Exploded view of SIKO SK-102 showing multi-layer filters

    Figure 4: Multi-layer filtration system components.

  • Upgraded Power Supply & Speed Controller: Precise control over fan speed for various applications.
    Close-up of the motor governor and speed controller

    Figure 5: Speed controller knob and digital display.

  • Convenient USB Charging Ports: Includes 3 USB-A ports and 1 Type-C port, all supporting 5V-3A fast charging.
    Close-up of the USB and Type-C charging ports

    Figure 6: Integrated USB charging ports.

  • Automatic Buckle for Hose: Ensures secure and easy attachment of the fume extraction hose.
    Close-up of the automatic buckle mechanism for the hose

    Figure 7: Automatic buckle for hose attachment.

5. Setup Instructions

  1. Unpack the Device: Carefully remove all components from the packaging.
  2. Place the Unit: Position the SK-102 on a stable, flat surface near your work area. Ensure adequate ventilation around the unit.
  3. Install Filters: Open the filter compartment (usually on the side or back) and insert the filter layers in the correct order (typically pre-filter first, then activated carbon, then HEPA). Ensure they are seated properly.
  4. Attach Fume Extraction Hose: Connect the flexible hose to the exhaust port on the top of the unit. Secure it using the automatic buckle mechanism. Position the hood end of the hose directly above the source of fumes.
  5. Connect Power: Plug the power adapter into the designated input port on the back of the unit. Then, plug the adapter into a suitable electrical outlet (110V or 220V, depending on your model).
SIKO SK-102 Fume Extractor ready for use

Figure 8: The SK-102 Fume Extractor after initial setup.

6. Operating Instructions

  1. Power On: Flip the "POWER" switch to the ON position. The digital display will illuminate.
  2. Adjust Fan Speed: Use the "MOTOR GOVERNOR" knob to adjust the fan speed. Turn clockwise to increase speed and counter-clockwise to decrease it. The digital display will show the current speed setting.
  3. Activate LED Light: If your model includes an LED light, it can be activated by a dedicated switch or integrated with the power switch. Position the light to illuminate your work area.
  4. Begin Work: Start your soldering or repair work, ensuring the fume extraction hood is positioned effectively to capture smoke and fumes.
  5. Power Off: After use, turn the "MOTOR GOVERNOR" knob to the minimum setting, then flip the "POWER" switch to the OFF position. Unplug the device from the power outlet.
  6. Using USB Charging Ports: Connect your compatible devices to the USB-A or Type-C ports for fast charging (5V-3A output). These ports can be used independently of the fume extraction function, as long as the unit is powered on.

7. Maintenance

Regular maintenance ensures the longevity and efficiency of your fume extractor.

7.1 Filter Replacement

The multi-layer filters are consumable items and need to be replaced periodically depending on usage and the type of fumes extracted. A noticeable decrease in suction power or an increase in odor indicates that filters need replacement.

  1. Ensure the device is powered off and unplugged.
  2. Locate and open the filter compartment cover.
  3. Carefully remove the old filters, noting their order.
  4. Dispose of used filters responsibly.
  5. Insert new filters in the correct sequence.
  6. Close the filter compartment cover securely.

7.2 Cleaning

  • Wipe the exterior of the unit with a soft, dry cloth.
  • Do not use abrasive cleaners or solvents.
  • Periodically check the fume extraction hose for any blockages or damage.

8. Troubleshooting

If you encounter issues with your SK-102 Fume Extractor, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Device does not power on.No power, loose connection, power switch off.Check power cable connection, ensure power switch is ON, try a different outlet.
Low suction power.Clogged filters, obstructed hose, low fan speed setting.Replace filters, clear any obstructions in the hose, increase fan speed.
Unusual noise during operation.Foreign object in fan, loose components.Power off and unplug, inspect fan area for obstructions. If noise persists, contact support.
LED light not working.Light switch off, LED failure.Ensure LED light switch is ON. If still not working, contact support.

9. Specifications

FeatureDetail
Model NumberSK-102
Brand NameSK
TypeCombination, Household Tool Set
ApplicationElectrical, Phone Repair, Soldering
Power150W
Input Voltage110V / 220V (model dependent)
USB Output3x USB-A, 1x Type-C (5V-3A Fast Charging)
Filtration SystemMulti-layer (Pre-filter, Activated Carbon, HEPA)
Package TypeBOX
Product WeightApprox. 2.0 kg
OriginMainland China

10. User Tips

  • For optimal fume capture, position the extraction hood as close as possible to the source of smoke without obstructing your work.
  • Regularly check the filters for discoloration or reduced airflow. Replacing them proactively will maintain air quality and device performance.
  • Utilize the adjustable fan speed to match the intensity of fumes produced; lower speeds for light work, higher speeds for heavy soldering.
  • The integrated USB charging ports are convenient for powering small tools or charging mobile devices directly from your workstation.

11. Warranty and Support

For warranty information, technical support, or replacement parts, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: HK SINKO TECHNOLOGY CO., LTD

For further assistance, please visit the SK Tech Store or contact customer service.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.