SK SK-102

Contents

SIKO SK-102 Fume Extraction System Instruction Manual

Model: SK-102 | Brand: SK

Introduction

The SIKO SK-102 Fume Extraction System is a high-performance smoke purifier engineered to effectively remove smoke, dust, and harmful fumes generated during laser engraving and similar processes. Designed for efficiency and user comfort, it features a powerful motor, multi-layer filtration, and an integrated LED light. This manual provides comprehensive instructions to ensure safe and optimal operation of your SK-102 system.

SIKO SK-102 Fume Extraction System with 150W High Power Smoke Extractor and LED Light
Figure 1: SIKO SK-102 Fume Extraction System with 150W High Power Smoke Extractor and LED Light.

Safety Information

WARNING: Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

  • Ensure the power supply matches the voltage requirements of the unit (110V or 220V).
  • Do not operate the unit with damaged cords or plugs.
  • Keep the unit away from water or other liquids.
  • Do not block air inlets or outlets during operation.
  • Always unplug the unit before performing any maintenance or cleaning.
  • Replace filters regularly to maintain optimal performance and safety.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Product Overview

The SK-102 is designed for user convenience and high-efficiency fume extraction. Key features include:

  • High Power: 150W motor for strong suction.
  • Efficient Filtration: Up to 98% smoke purification efficiency with a multi-layer filter system.
  • Adjustable Speed: Motor governor for precise control of fan speed (up to 5200r/min).
  • Integrated LED Light: Strong LED light source for improved visibility during operation, designed to be hidden without hurting eyes.
  • Convenient Charging: Features 3 USB 5V-3A fast charging ports and 1 Type-C port.
  • Durable Construction: Made from metal for longevity.
SIKO SK-102 Fume Extraction System with LED light source
Figure 2: Integrated LED light for enhanced visibility.
Close-up of the SIKO SK-102 USB and Type-C fast charging ports
Figure 3: USB and Type-C fast charging ports.
Close-up of the SIKO SK-102 control panel with motor governor and ON/OFF switch
Figure 4: Control panel with motor governor and power switch.

Setup Instructions

  1. Unpacking: Carefully remove all components from the packaging. Verify that all parts are present: main unit, flexible hose, collection nozzle, and filter set.
  2. Filter Installation:
    • Open the filter compartment on the side of the main unit.
    • Insert the multi-layer filters in the correct order as shown in Figure 5. Ensure they are seated properly to prevent air leakage.
    • Close the filter compartment securely.
    Exploded view of the SIKO SK-102 showing the multi-layer filter system
    Figure 5: Exploded view of the multi-layer filter system.
  3. Hose and Nozzle Assembly:
    • Attach the flexible hose to the exhaust port on the main unit. Ensure a tight fit, utilizing the automatic buckle mechanism if present (see Figure 6).
    • Attach the collection nozzle to the other end of the flexible hose.
    Image showing the automatic buckle for the hose connection
    Figure 6: Automatic buckle for secure hose connection.
  4. Placement: Position the collection nozzle near the source of fumes (e.g., laser engraving area). Ensure the main unit is on a stable, level surface with adequate ventilation around its air inlets and outlets.
  5. Power Connection: Connect the power cord to the unit and then to a suitable electrical outlet (110V or 220V, depending on your model).

Operating Instructions

  1. Power On: Flip the main power switch to the "ON" position. The digital display on the control panel should illuminate.
  2. Adjust Fan Speed: Use the motor governor knob (see Figure 4) to adjust the fan speed. Rotate clockwise to increase speed and counter-clockwise to decrease speed. The digital display will show the current speed setting.
  3. Activate LED Light: If your model includes an LED light, it can be activated or adjusted as needed for better visibility of your workspace.
  4. Operation: Begin your laser engraving or other fume-producing task. Ensure the collection nozzle is positioned to capture fumes effectively.
  5. Power Off: After use, turn the motor governor knob to the minimum setting, then flip the main power switch to the "OFF" position. Unplug the unit from the power outlet.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your SIKO SK-102 Fume Extraction System.

  • Filter Replacement:
    • The multi-layer filters (pre-filter, activated carbon, HEPA) should be inspected regularly.
    • Replace filters when you notice a decrease in suction power or an increase in visible fumes. The frequency depends on usage and the type of materials being processed.
    • To replace, unplug the unit, open the filter compartment, remove old filters, and insert new ones in the correct order (refer to Figure 5).
  • Cleaning the Unit:
    • Wipe the exterior of the unit with a soft, dry cloth.
    • Periodically check the air inlets and outlets for dust buildup and clean them using a soft brush or compressed air.
    • Ensure no liquids enter the internal components.
  • Hose and Nozzle: Inspect the flexible hose and collection nozzle for any damage or blockages. Clean as necessary.

Troubleshooting

ProblemPossible CauseSolution
Unit does not power on.No power supply; power switch off; faulty power cord.Check power connection; ensure switch is ON; try a different outlet; inspect power cord for damage.
Low suction power.Clogged filters; blocked hose/nozzle; fan speed too low.Inspect and replace filters; clear any blockages in hose/nozzle; increase fan speed using the motor governor.
Unusual noise during operation.Loose components; foreign object in fan; unit not on a stable surface.Turn off and unplug the unit. Check for loose parts or foreign objects. Ensure unit is on a stable surface.
LED light not working.Light switch off; LED failure.Check if the light is switched on. If not, contact support.

Specifications

FeatureDetail
Model NumberSK-102
Brand NameSK
Power150W
Fan SpeedUp to 5200 r/min
Filtration Efficiency98%
Voltage Options110V, 220V
MaterialMetal
ApplicationHousehold Tool Set (Laser Engraving Machine)
USB Output3x USB 5V-3A, 1x Type-C
OriginMainland China

User Tips

  • Optimal Placement: Always position the collection nozzle as close as possible to the fume source for maximum effectiveness.
  • Regular Filter Checks: Establish a routine for checking and replacing filters. Dirty filters significantly reduce performance and can lead to health hazards.
  • Ventilation: While the fume extractor is highly efficient, ensure your workspace is generally well-ventilated.
  • Power Management: Utilize the integrated USB and Type-C ports for convenient charging of other devices, but be mindful of the total power draw.

Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer/Seller: SK Tech Store

For general inquiries, you may refer to the official SK Tech Store video:

Video 1: SK Tech Store brand overview and company introduction.

© 2023 SK Tech Store. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.