1. Introduction
This manual provides comprehensive instructions for the IXHUB 10.1-inch Smart Central Control Screen, model IXS101-A133P. It covers product features, specifications, setup, operation, and maintenance to ensure optimal performance and longevity of your device.
The IXHUB 10.1-inch smart central control screen integrates display interaction and control. It adopts industrial-grade LCD screen and is suitable for harsh environments such as industry. Equipped with a quad-core processor, it offers strong performance and meets the needs of various interactive design scenarios. The product has rich peripheral interfaces, allowing users to achieve rapid development by calling the system SDK, effectively shortening the product development cycle.
2. Product Features
- Processor: Allwinner A133P, ARM quad-core A53 architecture, up to 1.8GHz.
- Memory & Storage: Up to 4GB RAM and 256GB storage (standard 1GB RAM, 8GB EMMC).
- Display: 10.1-inch IPS LCD screen with 1024x600 resolution.
- Touch: 5-point capacitive touch, supporting continuous sliding touch.
- Brightness: Available in 500nit, 600nit, or 1000nit options.
- Operating System: Supports Android 10.0, Linux QT, and Ubuntu 18.04.
- Connectivity: 2-way Serial (RS232/TTL/RS485), 7-way USB (1 external USB 2.0, 4 built-in USB 2.0, 1 USB OTG, 1 Type-C), 5-way GPIO, 10/100Mbps Ethernet (RJ45), Wi-Fi (IEEE 802.11 b/g/n/ac), Bluetooth 4.2, 4G LTE (via Mini PCIe slot).
- Power Input: 9V-24V wide voltage DC input.
- Durability: Industrial-grade design, 6H hardness tempered panel, backlight lifetime over 20,000 hours.
3. Package Contents
Verify that all items are present in the package:
- Smart Control Screen (10.1-inch)
- Static bag
- Power Adapter
- Warranty Card
4. Setup and Connections
This section details the physical interfaces and how to connect your IXHUB Smart Control Screen.
4.1 Product Interface Overview
The main components and interfaces are:
- PCB Board: The main circuit board.
- LCD Screen: The display panel.
- Touch Screen: The interactive touch layer.
- DC-12V: Power input.
- RTC: Real-Time Clock.
- AI Chips (Optional): For AI functionalities.
- Fan: Cooling fan connector.
- Power Switch: For power control.
- MIC: Microphone input.
- Button: General purpose button.
- Relay (Optional): For external control.
- USB Ports: Multiple USB ports for peripherals.
- Amplifier: Audio amplifier output.
- Earphone: Audio output.
- A133P: Main processor.
- OTG: USB On-The-Go port.
- Burn Button: For system flashing/burning mode.
- XR829: Wireless module.
- WiFi ANT: Wi-Fi antenna connector.
- KIO: General purpose I/O.
- MIPI Camera: Camera interface.
- COM0, COM2: Serial communication ports (RS232/TTL/RS485).
- PCIE: Mini PCIe slot for 4G/5G module.
- Micro-SIM: SIM card slot.
- TF: TF card (MicroSD) slot.
- RJ45: Ethernet port.
4.2 Power Connection
Connect the provided power adapter to the DC-12V input port (J6 DC_IN). The device supports a wide voltage input range of 9V-24V. Ensure the power supply is a regulated 12V 2A DC power supply for optimal performance.
J6 DC_IN Pin Definition:
| Pin# | Definition | Note |
|---|---|---|
| 1 | 12V | Direct Current Input (9~24V) |
| 2 | 12V | Direct Current Input (9~24V) |
| 3 | GND | Power Ground |
| 4 | GND | Power Ground |
4.3 Serial Port Connections (COM0, COM2)
The device features two serial ports, COM0 (J12) and COM2 (J13), which can be configured for RS232, TTL 3.3V, or RS485 communication. By default, the output level is RS232.
J12 COM0 Pin Definition:
| Pin# | Definition | Note |
|---|---|---|
| 1 | GND | Digital Ground |
| 2 | RX|A+ | Data receive (TTL or RS-232 or RS-485 level) |
| 3 | TXB- | Data transmit (TTL or RS-232 or RS-485 level) |
| 4 | VCC | Power output (Default 3.3V, 5V option) |
J13 COM2 Pin Definition: (Same as COM0)
| Pin# | Definition | Note |
|---|---|---|
| 1 | GND | Digital Ground |
| 2 | RX|A+ | Data receive (TTL or RS-232 or RS-485 level) |
| 3 | TXB- | Data transmit (TTL or RS-232 or RS-485 level) |
| 4 | VCC | Power output (Default 3.3V, 5V option) |
4.4 USB Connections
The device offers multiple USB interfaces. J14-J18 are USB headers for internal connections. J22 is a standard USB 2.0 Type A Host. J27 is a USB 2.0 Type-A Socket primarily for system burning or ADB connection. J28 is another USB OTG header.
J14-J18 USB Header Pin Definition:
| Pin# | Definition | Note |
|---|---|---|
| 1 | GND | Digital Ground |
| 2 | D+ | USB Differential Data+ |
| 3 | D- | USB Differential Data- |
| 4 | 5V | 5V Output |
Note: The USB interfaces J22 and J14-J18 share the same signals and cannot be used simultaneously.
4.5 Ethernet and Wireless Connectivity
Connect to a wired network via the RJ45 Ethernet port (J8/J9) for 10/100Mbps auto-adaptive Ethernet. For wireless connectivity, the device supports Wi-Fi (IEEE 802.11 b/g/n/ac) and Bluetooth 4.2. A Mini PCIe slot (J33) is available for a 4G/5G module, requiring a Micro-SIM card (J11).
J8 RJ45 Ethernet Interface: Supports 10/100Mbps Bandwidth.
J9 Ethernet Jack Pin Definition:
| Pin# | Definition | Note |
|---|---|---|
| 1 | TX+ | Transmit Data1+, Connect the RJ45 female base to PIN1 |
| 2 | TX- | Transmit Data1-, Connect the RJ45 female base to PIN2 |
| 3 | RX+ | Receive Data2+, Connect the RJ45 female base to PIN3 |
| 4 | RX- | Receive Data2-, Connect the RJ45 female base to PIN6 |
Note: The pins of the RJ45 base are defined as follows:
J11 Micro-SIM Deck: The SIM card slot is a conventional middle card slot. Ensure the SIM card notch is inserted outward.
J21 WiFi Antenna buckle: Standard IPEX Antenna buckle (2.0mm).
4.6 GPIO and Other Interfaces
The device provides a 5-way GPIO signal (J19) for expandable buttons or 3.3V input/output. Other interfaces include a TF card socket (J10) supporting up to 256GB, MIPI Camera interface (J34), and audio input/output headers (J25, J26).
J19 GPIO Signal Pin Definition:
| Pin# | Definition | Note |
|---|---|---|
| 1 | VCC | 3.3V Power Supply Output |
| 2 | K1 | Button1 (GPIO No.66) |
| 3 | K2 | Button2 (GPIO No.67) |
| 4 | K3 | Button3 (GPIO No.68) |
| 5 | K4 | Button4 (GPIO No.71) |
J10 TF Card Socket: Standard TF Card Socket. Supports up to 256GB TF Card.
J34 MIPI Camera: FPC-0.5mm 30-Pin lower contact circle is 1 pin.
J25 Audio Line Output: SIP 1.25mm-Square pad is pin 1.
J26 Audio Input Header: SIP 1.25mm-Square pad is pin 1.
5. Operating Instructions
The IXHUB Smart Control Screen is designed for flexible operation and multipoint UI interaction, supporting both Android and Linux operating systems.
5.1 Power On/Off and Reset
To power on the device, ensure it is connected to a stable power supply. The J2 Power ON/OFF header (J2) can be used for external power control.
J2 Power ON/OFF Pin Definition:
| Pin# | Definition | Note |
|---|---|---|
| 1 | PW | One-key switch/switch screen signal |
| 2 | GND | Digital Ground |
| 3 | RES | Hardware reset signal |
Hardware Button (J31):
- [RESET]: Press the reset button once to initiate a system restart.
- [MODE]: By pressing the return key once, the system will manually revert to the upper-level operation interface.
- [U1/V+]: Pressing the default volume plus button once will increase the multimedia volume of the system by 1%.
- [U2/V-]: Pressing the default volume reduction button decreases the multimedia volume of the system by 1%.
- [UBOOT]: To enter burning mode, manually press and hold the system burning button, then power on after releasing it about 3 seconds later.
5.2 Touch Screen Operation
The 10.1-inch capacitive touch screen supports 5-point touch and gesture interaction. It has a 6H hardness tempered panel for durability.
Video 5.1: Demonstration of flexible operation and multipoint UI interaction.
5.3 Operating System and Software
The device supports Android 10 and Linux QT. Technical data support includes specifications files, user manuals, SDKs, mechanical drawings (DWG), and application tools.
The device also features professional 4G Guardian Software for automatic recovery and stable signal coverage when the 4G network is abnormal.
6. Maintenance and Care
To ensure the longevity and optimal performance of your IXHUB Smart Control Screen, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that may damage the surface.
- Environmental Conditions: Operate the device within the specified environmental conditions:
- Operating Temperature: -10°C to 60°C
- Storage Temperature: -20°C to 70°C
- Operating Humidity: 0% to 95% (No condensation)
- Power Supply: Always use a stable 9V-24V DC power supply, preferably a regulated 12V 2A DC power supply.
- Software Updates: Regularly check for and install system updates to ensure security and performance improvements.
- Physical Protection: The screen features a 6H hardness tempered panel, but avoid excessive force or sharp objects to prevent damage.
7. Troubleshooting
This section provides solutions to common issues you might encounter.
- Screen Not Responding:
- Check power connection.
- Perform a system restart by pressing the [RESET] button.
- Ensure the touch panel FPC cable is securely connected.
- Abnormal Display (Freezing, Black Screen, Distorted Screen):
- Restart the device.
- Verify power supply stability.
- If the issue persists, contact technical support.
- Network Connectivity Issues:
- For wired Ethernet, check RJ45 cable connection.
- For Wi-Fi, ensure the antenna is properly connected (J21) and the Wi-Fi module is enabled in the OS.
- For 4G/5G, ensure the Mini PCIe module (J33) and Micro-SIM card (J11) are correctly installed and configured.
- Utilize the 4G Guardian Software for network diagnostics if applicable.
- Audio Problems:
- Check connections to J25 (Audio Line Output) or J26 (Audio Input Header).
- Adjust volume using the [U1/V+] and [U2/V-] buttons.
- If headphones are inserted, ensure they are properly seated, as this mutes speakers.
For complex issues or technical assistance, refer to the "Technical support services" section or the provided PDF user manual.
8. Specifications
8.1 General Specifications
| Attribute | Description |
|---|---|
| Model | IXS101-A133P |
| Product Type | Tablet Touch Panel / Smart Central Control Screen |
| Processor | Allwinner A133P, Quad-core A53, 1.8GHz |
| Memory | Default 1GB (2GB/4GB Optional) |
| Storage | Default 8GB EMMC (Up to 128GB) |
| System | Linux/Android (Default Android 10.0, Optional Linux QT, Ubuntu 18.04) |
| Certification | CE, FCC, RoHS |
8.2 Display Specifications
| Attribute | Description |
|---|---|
| Display Size | 10.1 Inch |
| Screen Type | IPS LCD Panel |
| Resolution | 1024*600 Pixel |
| Colors | 16.7 Million Colors |
| Brightness | 500nit (Optional: 600nit/1000nit) |
| Viewing Angle | Typical 85°/85°/85°/85° (Left/Right/Up/Down) |
| Backlight Lifetime | >20000 Hours |
| Touch Mode | 5-point capacitive touch |
| Touch Hardness | 6H |
| Touch Lifespan | >1,000,000 Times |
8.3 Electrical and Environmental Specifications
| Attribute | Description |
|---|---|
| Rated Power | <3W |
| Operating Voltage | DC 9~24V (Typical 12V) |
| Operating Current (Max Backlight) | 648mA (VCC = +12.2V) |
| Operating Current (Min Backlight) | 220mA (VCC = +12.2V) |
| Operating Temperature | -10°C ~ 60°C |
| Storage Temperature | -20°C ~ 70°C |
| Operating Humidity | 0% ~ 95% (No condensation) |
8.4 Mechanical Dimensions
| Attribute | Value |
|---|---|
| Overall Dimension (L*W*H) | 258.30mm * 148mm * 24.3mm |
| Effective Display Area (L*W) | 222.72mm * 125.28mm |
9. User Tips
- For development, leverage the provided SDK and technical documentation for efficient integration.
- When using the USB ports, note that some internal and external USB interfaces share signals and cannot be used simultaneously. Refer to the pin definitions for specific usage.
- The device is designed for industrial applications and can withstand a wide range of temperatures, making it versatile for various environments.
- Consider the optional high-brightness screens (600nit/1000nit) for outdoor or brightly lit environments to ensure optimal visibility.
10. Warranty and Support
The IXHUB Smart Control Screen comes with a one-year warranty. For technical support, inquiries, or R&D assistance, please contact the FAE team directly. They will submit your request to the internal system and assign it to relevant R&D specialists.
A user manual in PDF format is available for detailed information. You can find it referenced contextually in the technical data support section.
PDF User Manual Reference: View User Manual (PDF)