SMAEL 8049

Contents

SMAEL 8049 Sport Watch Instruction Manual

Model: 8049

Brand: SMAEL

1. Introduction

Thank you for choosing the SMAEL 8049 Sport Watch. This watch combines analog and digital displays with a range of features designed for an active lifestyle. Please read this manual carefully to understand the full functionality and ensure proper use and care of your watch.

2. Features

  • 12 Digits LCD Display: Shows Hour, Minute, Second, Month, Day, and Week.
  • Analog-Digital Dual Time Display.
  • Daily Alarm and Hourly Chime.
  • 12/24 Hour Format Selectable.
  • Full Auto Calendar.
  • EL Backlight for clear viewing in low light.
  • 1/100 Second Chronograph with split functions (Stopwatch).
  • Shock Resistant design.
  • 50M Water Resistance.
  • Luminous hands for analog display.

3. Specifications

Watch dimensions and specifications diagram

Figure 1: Watch Dimensions and Information Parameters

AttributeSpecification
Brand NameSMAEL
Model Number8049
Display TypeAnalog-Digital
MovementQuartz, Dual Display (Quartz + Electronics)
Movement OriginJapan
Water Resistance Depth5Bar (50 meters)
Case MaterialPlastic
Case ShapeRound
Case Thickness18 mm
Dial Diameter59 mm
Dial Window Material TypePlexiglass Mirror
Band Material TypePU (Polyurethane)
Band Length21 cm (Total Length: 254mm)
Strap Width22 mm
Clasp TypeBuckle
Battery IncludedYes
Weight77g

4. Components Overview

Functional Analysis diagram showing watch buttons

Figure 2: Watch Buttons and Functions

  • LIGHT (A) Button: Activates the EL backlight.
  • MODE (B) Button: Cycles through different operational modes (Normal, Chronograph, Alarm, Time Setting).
  • RESET (C) Button: Used for setting adjustments and split functions in Chronograph mode.
  • START/STOP (D) Button: Used for starting/stopping functions and adjusting values during settings.

5. Setup and Operation

5.1. EL Backlight

In any mode, press the LIGHT (A) button to illuminate the EL backlight for approximately 3 seconds.

Cold Light Design feature of the watch

Figure 3: Cold Light Design

5.2. Mode Conversion

Press the MODE (B) button to cycle through the following modes in sequence:

  1. Normal Time Display Mode
  2. Chronograph (Stopwatch) Mode
  3. Alarm Mode
  4. Time Setting Mode

5.3. Chronograph (Stopwatch) Functions

  1. From Normal Time Display Mode, press MODE (B) once to enter Chronograph Mode.
  2. Press START/STOP (D) to start the stopwatch.
  3. Press START/STOP (D) again to stop the stopwatch.
  4. To continue timing after stopping, press RESET (C).
  5. To record a split time (hold on), press RESET (C) while the stopwatch is running. The display will show the split time, but the stopwatch continues to run in the background. Press RESET (C) again to return to the running stopwatch display.
  6. To reset the stopwatch to zero, press RESET (C) when the stopwatch is stopped.

5.4. Alarm Setting

  1. From Normal Time Display Mode, press MODE (B) twice to enter Alarm Mode.
  2. Press RESET (C). The hour digits will start flashing.
  3. Press START/STOP (D) to adjust the hour. Pay attention to AM/PM for 12-hour format.
  4. Press RESET (C) again. The minute digits will start flashing.
  5. Press START/STOP (D) to adjust the minutes.
  6. Press MODE (B) to exit Alarm Setting Mode and return to Normal Time Display Mode.

5.5. Alarm & Chime ON/OFF

  1. From Normal Time Display Mode, press MODE (B) twice to enter Alarm Mode.
  2. Press START/STOP (D) to toggle the Alarm (ALM) and Hourly Chime (SIG) functions ON or OFF.
  3. If the "ALM" and/or "SIG" symbols appear on the display, the respective function is ON. If they are not displayed, the function is OFF.

5.6. Time and Date Setting

  1. From Normal Time Display Mode, press MODE (B) three times to enter Time and Date Setting Mode. The seconds digits will start flashing.
  2. Press START/STOP (D) to zero out the seconds.
  3. Press RESET (C). The hour digits will start flashing.
  4. Press START/STOP (D) to adjust the hour. Repeatedly pressing START/STOP (D) will cycle between 12-hour and 24-hour formats.
  5. Press RESET (C). The minute digits will start flashing.
  6. Press START/STOP (D) to adjust the minutes.
  7. Press RESET (C). The month digits will start flashing.
  8. Press START/STOP (D) to adjust the month.
  9. Press RESET (C). The date digits will start flashing.
  10. Press START/STOP (D) to adjust the date.
  11. Press RESET (C). The day of the week will start flashing.
  12. Press START/STOP (D) to adjust the day of the week.
  13. Press MODE (B) to exit Time and Date Setting Mode and return to Normal Time Display Mode.

6. Water Resistance Guidelines

50M Waterproof icons for watch activities

Figure 4: 50M Water Resistance Activities

Watch Waterproof Rating table

Figure 5: Watch Waterproof Rating Table

Your SMAEL 8049 watch is rated for 50 meters (5ATM) water resistance. This means it is suitable for:

  • Washing hands
  • Rain exposure
  • Washing car
  • Cold bath
  • Swimming

Important Note: NEVER press any buttons while the watch is submerged in water or wet. This can compromise the water resistance and damage the internal components.

Avoid contact with chemicals such as detergents. Please rinse the watch with clean water immediately after contact with sea water. Avoid chemical residues from corroding the watch.

7. Maintenance

  • Cleaning: Wipe the watch case and strap with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly.
  • Avoid Extreme Temperatures: Do not expose the watch to extreme hot or cold temperatures for prolonged periods.
  • Chemicals: Avoid direct contact with solvents, detergents, perfumes, and cosmetics, as they may damage the watch case, strap, or gaskets.
  • Battery Replacement: When the display becomes dim or functions become erratic, it may be time to replace the battery. It is recommended to have the battery replaced by a qualified watch technician to ensure water resistance is maintained.
  • Storage: When not in use for an extended period, store the watch in a cool, dry place away from direct sunlight.

8. Troubleshooting

  • Display is blank or dim: The battery may be low or depleted. Replace the battery.
  • Time is inaccurate: Re-set the time and date following the instructions in section 5.6. If the issue persists after battery replacement, the movement may require servicing.
  • Buttons are unresponsive: Ensure the watch is dry. If buttons are still stiff or unresponsive, do not force them. Seek professional assistance.
  • Water inside the watch: If you notice condensation or water droplets inside the watch, stop using it immediately and have it inspected by a professional to prevent further damage.

9. User Tips

  • Size Consideration: This is a large watch, which some users appreciate for its masculine look and clear display.
  • Easy Adjustment: Both analog and digital times are reported to be very easy to adjust and maintain accuracy.
  • Visibility: Users note good visibility, and the luminous hands on the analog display are a helpful feature in the dark.
  • Alarm Sound: While functional, some users find the alarm sound to be a bit soft. Consider this if you rely heavily on a loud alarm.
  • Strap Availability: Some users inquire about extra straps, suggesting they might be replaceable. Check with the seller or manufacturer for availability.

10. Product Showcase Video

Video: SMAEL 8049 Sport Watch Features and Water Resistance Demonstration

11. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you require further assistance or have questions not covered in this manual, please reach out to the customer support of your point of purchase.

A digital version of the user manual (PDF) is available for download: SMAEL 8049 User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.