Estardyn 1.28 inch TFT LCD Display Module

Contents

Estardyn 1.28 inch TFT LCD Display Module User Manual

Model: 1.28 inch TFT LCD Display Module

1. Overview

This manual provides detailed instructions for the Estardyn 1.28 inch TFT LCD Display Module. This module features a round IPS color display with a 240x240 resolution, driven by the GC9A01 chip, and communicates via a 4-wire SPI interface. It offers a full viewing angle and adjustable display direction, making it suitable for various embedded display applications.

Three Estardyn 1.28 inch TFT LCD Display Modules: one round with a galaxy image, one square with a blue abstract image, and one red board with a blue abstract image.
Figure 1: Estardyn 1.28 inch TFT LCD Display Modules (Round and Square variants)

2. Specifications

Parameter Value
Product Name 1.28inch 240*240 IPS LCD Display Screen
Material IPS color display screen
Resolution 240*240
Driver Chip GC9A01
Display Size 1.28 inch
Display Area D32.4mm
Panel Size 35.6*38.1*1.5mm
Interface Type 4-Pin SPI
Work Voltage 2.8V-3.3V
Pins 2.54mm 8Pin
View Full viewing angle display
Working Temperature Range -20℃~70℃
Working Humidity Range 5%-95%RH
PCB Size 44*36*5mm

3. Setup and Connections

The Estardyn 1.28 inch TFT LCD Display Module utilizes a 4-wire SPI interface for communication. Ensure your microcontroller or development board supports 3.3V logic levels. Connecting to higher voltages can damage the module.

3.1 Pinout Description

The module features an 8-pin header with the following functions:

  • GND: Ground connection.
  • VCC: Power supply input (2.8V-3.3V).
  • SCL: SPI Clock input.
  • SDA: SPI Data input (MOSI).
  • RES: Reset pin for the display controller.
  • DC: Data/Command selection pin.
  • CS: Chip Select pin for SPI communication.
  • BLK/LED: Backlight control (if available, otherwise typically tied high internally).
Back view of the blue round display module, showing pin labels (RST, CS, DC, SDA, SCL, GND, VCC, BLK) and IC GC9A01.
Figure 2: Pinout of the Round Display Module (Back View)
Front view of the blue round display module, showing the screen and pin labels (RST, CS, DC, SDA, SCL, GND, VCC, BLK).
Figure 3: Pinout of the Round Display Module (Front View)

3.2 Wiring Example

Connect the module to your microcontroller as follows. This is a general guide; refer to your microcontroller's documentation for specific SPI pin assignments.

  • VCC to 3.3V power supply.
  • GND to Ground.
  • SCL to Microcontroller's SPI Clock (SCK).
  • SDA to Microcontroller's SPI Data Out (MOSI).
  • RES to a GPIO pin on your microcontroller.
  • DC to a GPIO pin on your microcontroller.
  • CS to a GPIO pin on your microcontroller.
  • BLK/LED (if present and controllable) to a GPIO pin or 3.3V for constant backlight.
A blue round display module connected to a breadboard with an Arduino, displaying 'Humidite 11.4%'.
Figure 4: Example connection to a microcontroller (Arduino shown)

4. Operation

To operate the display, you will need to write code for your microcontroller to communicate with the GC9A01 driver chip via SPI. Libraries for the GC9A01 or generic SPI TFT displays are often available for popular development platforms like Arduino or ESP32.

Key aspects of operation include:

  • Initialization: Send a sequence of commands to the GC9A01 driver to configure the display, including resolution, color mode, and orientation.
  • Data Transfer: Use the SPI interface to send pixel data to the display. The GC9A01 supports various commands for drawing pixels, lines, rectangles, and images.
  • Display Direction: The display supports adjustable direction, allowing you to rotate the content programmatically to suit your application's physical orientation.
  • Full Viewing Angle: The IPS panel ensures consistent color and contrast across a wide range of viewing angles.
Two display modules showing clock faces: one with a classic analog clock and another with a modern digital/analog hybrid.
Figure 5: Displaying clock faces on the module
A blue round display module showing a detailed digital clock face with date and time.
Figure 6: Digital clock display example

5. Maintenance

To ensure the longevity and optimal performance of your display module, follow these maintenance guidelines:

  • Cleaning: Gently wipe the display surface with a soft, lint-free cloth. For stubborn smudges, slightly dampen the cloth with distilled water or a specialized screen cleaner. Avoid abrasive materials or harsh chemicals.
  • Environmental Conditions: Operate and store the module within the specified working temperature range of -20℃ to 70℃ and humidity range of 5%-95%RH. Avoid extreme temperatures, direct sunlight, and high humidity environments.
  • Handling: Handle the module by its edges to avoid touching the display surface or the delicate flex cable. Static electricity can damage electronic components, so use anti-static precautions when handling.

6. Troubleshooting

Q: The display appears square, but it's advertised as round.
A: The display panel itself is physically round, but the underlying pixel matrix is 240x240, which is inherently square. The round appearance is achieved by masking the corners of the active pixel area. This is a common design for round LCDs.
Q: There is no dedicated backlight control pin, or the backlight is always on.
A: Some versions of this module may not expose a controllable backlight pin (BLK/LED) or it might be internally tied to VCC. If backlight control is crucial for your application, verify the specific module's pinout and schematic. If no control pin is available, the backlight will typically be on whenever the module is powered.
Q: The display is not turning on or showing any content.
A: Check the following:
  • Power Supply: Ensure VCC is connected to a stable 2.8V-3.3V power source and GND is correctly connected.
  • Wiring: Double-check all SPI connections (SCL, SDA, CS, DC, RES) for correct pin assignments and secure connections.
  • Code Initialization: Verify that your microcontroller code correctly initializes the GC9A01 driver chip with the appropriate command sequence.
  • Reset Pin: Ensure the RES pin is properly toggled during initialization or held high/low as required by the GC9A01 datasheet.

7. User Tips

  • This display module is well-suited for applications requiring a compact, round display, such as simulating a galvanometer or creating custom wearable interfaces.
  • The IPS panel provides vibrant and accurate colors, enhancing the visual experience of your projects.
  • Always ensure your power supply is within the 2.8V-3.3V range. Applying higher voltages can permanently damage the module.

8. Warranty and Support

For technical support, warranty information, or inquiries regarding the Estardyn 1.28 inch TFT LCD Display Module, please contact Estardyn customer service or your point of purchase. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.