Milfra KS811

Contents

Milfra Tuya Zigbee Smart Wall Switch User Manual

Model: KS811

1. Introduction

The Milfra Tuya Zigbee Smart Wall Switch (Model KS811) offers a modern and convenient way to control your home lighting. This smart switch features a sensitive push-button design for excellent on/off control, an ultra-quiet operation, and a subtle green indicator light for visibility in the dark. It integrates seamlessly into your smart home ecosystem, providing multiple controlling modes including manual operation, wireless remote control via the Smart Life App, voice control through popular assistants like Amazon Alexa and Google Home, and custom scheduling and scene patterns.

The KS811 is designed for a smart lifestyle, offering energy-saving features and the ability to share device control with family members for enhanced convenience.

Milfra Tuya Zigbee Smart Wall Switch variants (1, 2, 3 gang) with Tuya, Zigbee, and IFTTT logos, indicating no capacitor required and compatibility with Amazon Alexa and Google Home.
Milfra Tuya Zigbee Smart Wall Switch variants (1, 2, 3 gang) and key features.

2. Safety Information and Important Notes

  • Cut off the power before installation. Always ensure the circuit breaker is off before handling electrical wiring.
  • Professional Installation Recommended: Basic electrical wiring knowledge or experience is required. If you are unsure, please consult a professional electrician.
  • Zigbee Network: This smart switch operates on a 2.4GHz Zigbee network (IEEE802.15.4 standard). It is not compatible with 5.0GHz networks.
  • Zigbee Hub Required: A Zigbee hub (e.g., Tuya Zigbee hub) is required for smart functionality and app control. This device cannot connect directly to a Wi-Fi router for smart features.
  • Circuit Compatibility: Only supports one-way/single-pole circuits. Not compatible with 3-way switches.
  • Neutral Wire: This switch is available in versions that require a neutral wire and versions that do not. Ensure you have the correct version for your home's wiring.
  • Load Type: Applicable only to control lamps. Not recommended for use as other electrical breakers.
  • Reset Function: The ON/OFF button can also serve as a reset button. Long-pressing it will reset your smart switch to factory defaults, erasing all settings. Only perform this if you intend to clear all configurations.

3. Package Contents

  • Smart Switch x 1
  • User Manual x 1
  • Screw x 2

4. Specifications

AttributeValue
TypeSmart Wall Light Switch
ModelKS-811
Power Supply ModeNeutral + Live Wire (Optional: No Neutral Wire)
Rated Current10A (Max)
Rated VoltageAC100V-250V (50/60Hz)
Load PowerLED Lamp: Max 150W, INC Lamp: Max 600W
Wireless Frequency2.4GHz (2.412-2.484MHz)
Wireless StandardIEEE802.15.4 Zigbee
Product Size116*75*35MM
Working Environment-20℃~75℃
Working Humidity<95%
Controlling DistanceNo distance limitation (within Zigbee network range)
Wireless Security SupportWEP/WPA-PSK/PA2-PSK
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc
MaterialPlastic
CertificationRoHS, FCC, CE
Product dimensions of the smart wall switch: 116mm height, 75mm width, 35mm depth, with a 23mm protrusion from the wall.
Product dimensions and specifications.

5. Installation Guide

Please ensure power is OFF at the circuit breaker before proceeding with installation.

  1. Turn off Circuit Breaker: Locate the circuit breaker controlling your light and turn it off. Verify power is off by attempting to operate the light switch a few times.
  2. Find the Neutral Wire: In the wall cassette, look for one or more white wires secured with a wire nut. This is typically the neutral wire. If you cannot find a neutral wire, ensure you have purchased the 'No Neutral Wire' version of the switch. If you have the 'With Neutral Wire' version and cannot find a neutral wire, consult a professional electrician.
  3. Label Your Wires: Before removing your old switch, clearly label or record the corresponding wires (Live, Load, Neutral, Ground).
  4. Install the Smart Switch:
    • Remove the faceplate of the smart switch using a small screwdriver from the notch.
    • Connect the smart switch wires to your home's electrical wires using wire nuts, following the appropriate wiring diagram below. Ensure Live and Load wires are correctly matched.
    • Carefully place the switch into the wall box and secure it with screws.
    • Attach the faceplate.
  5. Turn on Circuit Breaker: Restore power to the circuit at the breaker.
  6. Check the Indicator Light: The indicator light on the switch should blink rapidly, indicating it's ready for connection.

Wiring Diagrams

Refer to the diagrams below for proper wiring based on your switch version (with or without neutral wire).

Wiring diagrams for Zigbee Neutral + Live Wire Version and Zigbee Version-Single Wire. Shows connections for Ground, Neutral, Live, Load1, Load2, and Load3 with color-coded tips.
Zigbee Wiring Diagrams: Neutral + Live Wire Version (top) and Single Wire Version (bottom).
Diagrams showing wiring for 'Connect to the neutral wire' and 'Not required neutral wire' versions, including a note about the capacitor and an attention message for neutral wire presence.
Wiring methods for switches with and without neutral wire, including capacitor information.
Back view of a 3-gang smart switch showing wiring terminals for Ground, Neutral, Line, Load1, Load2, and Load3.
Back view of a 3-gang smart switch with labeled wiring terminals.

6. App Setup

The Milfra Smart Wall Switch works with the

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.