TKSTAR TK905B GPS Tracker User Manual

1. Introduction

Thank you for purchasing the TKSTAR TK905B GPS Tracker. This manual provides detailed instructions on how to set up, operate, and maintain your device. The TK905B is a versatile GPS locator designed for real-time tracking of vehicles and assets, featuring powerful magnetic attachment, waterproof design, and long battery life. Please read this manual carefully to ensure proper use and to maximize the device's capabilities.

Image: TKSTAR TK905B GPS Tracker, highlighting 4G LTE capability and 10000mAh battery.

2. Specifications

The TKSTAR TK905B GPS Tracker comes with the following technical specifications:

3. Package Contents

Upon unboxing your TKSTAR TK905B GPS Tracker, you should find the following items:

• 1 x TKSTAR TK905B GPS Tracker Unit
• 1 x USB Charging Cable
• 1 x User Manual (PDF version available at User Manual PDF)
• 1 x Protective Pouch
• 1 x SIM Card Adapter (for Micro/Nano SIMs, if needed)

Image: Package contents for the 4G version, including the tracker, USB cable, manual, and pouch.

4. Setup Guide

4.1 Hardware Description

Familiarize yourself with the key components of your TK905B tracker:

1. USB Port: For charging the device.
2. Indicator Light: Provides status feedback.
3. SIM Card Slot: For inserting the SIM card.
4. Lanyard Hole: For attaching a lanyard.
5. Strong Magnet: For secure attachment to metallic surfaces.

Image: Top view of the TK905B GPS Tracker, indicating the USB port, indicator light, SIM card slot, lanyard hole, and strong magnet locations.

4.2 SIM Card Preparation and Insertion

The TK905B requires a Normal SIM card (25mm x 15mm) with GPRS functionality. Ensure the SIM card is registered and topped up with credit. If you have a Micro or Nano SIM card, you will need to use the provided adapter to fit it into the tracker.

• Purchase a Normal SIM card (Standard SIM card).
• Register the SIM card with your mobile carrier.
• Top up the SIM card with sufficient credit for data and SMS.
• Important: Ensure the SIM card's PIN code is deactivated before insertion.
• Note: Remember and make a note of your GPS SIM card number.

Image: Guide to SIM card sizes and adapter usage.

Image: Close-up of SIM card insertion into the TK905B tracker.

4.3 Charging and Turning On the Device

• Turn on the device: Insert the prepared SIM card into the SIM card slot. The indicator light will turn on.
• Turn off the device: The device automatically turns off when the SIM card is removed.
• Charge your GPS tracker: Connect the provided USB cable to the tracker and a power source. The red light on the device indicates charging. Once fully charged, the red light will disappear.
• Note: Do not use a fast charger, as this can damage the battery.

5. Operating Instructions

5.1 SMS Tracking

SMS tracking allows you to receive location information directly to your phone via text message.

• To receive a Google Maps link: Send the SMS command G123456# to the SIM card number in the GPS tracker, or simply call the SIM card number. You will receive a text message with a Google Maps link. Click the link to view the exact location.
• Understanding SMS Reply Parameters:
  

  Image: Example SMS reply showing GPS coordinates, speed, time, battery, device ID, and Google Maps link.

  • lat:XX.XXXXX lon:YY.YYYYY: Latitude and longitude values for positioning.
  • spd:000: Device moving speed in km/h.
  • T:DD/MM/YY HH:MM: Real-time tracking time (default London time, adjustable in app).
  • bat:100%: Battery level (alarms when below 20%).
  • ID:XXXXXXXXXX: Device ID number for app/platform login.
  • https://maps.google.com/maps?q=...: Google Maps link showing tracker position.
  • lac:XXXX XXXX: Real-time LBS positioning data (without GPS signal).
• Admin Number Setting: To ensure all SMS operations are controlled by a specific number, send admin123456 [your phone number] to the tracker's SIM card number. The tracker will reply with admin ok. To cancel, send noadmin123456.
• Over-speed Alarm Setting: (Works in Sleep by shock sensor mode only) Send speed123456 [speed in km/h] (e.g., speed123456 070 for 70km/h). The tracker will reply with speed ok. If the unit exceeds the set speed, it will send a "speed alarm!" message to the admin number every 5 minutes. To cancel, send nospeed123456.
• Shake Alarm Setting: Send shock123456. The tracker will reply with shock ok. If the tracker remains stationary for 5 minutes and then detects a shake, it will send a "sensor alarm!" SMS to the admin number. To cancel, send noshock123456.
  

  Image: Mobile phone receiving a 'sensor alarm' message from the tracker.

  

  Image: Mobile phone receiving a 'speed alarm!' message, with a car dashboard indicating high speed.

• Terminal (Local) Time Setting: Send timezone123456 [local time zone] (e.g., timezone123456 +1). The tracker will reply with time ok!. This is used for changing the timezone in SMS positioning.

5.2 Online Tracking (Web Platform & Mobile App)

For real-time tracking and advanced features, use the web platform or mobile application.

• Web Platform: Visit www.mytkstar.net. Select "Login by ID" and enter the ID number (found on the back cover of the device) and the password (last 4 digits of the ID number).
• Mobile Applications (Android/iOS): Search for "WINNES GPS" in the Apple App Store or Google Play Store, or scan the QR code below to install the application.
  

  Image: QR code for WINNES GPS app download.

  

  Image: WINNES GPS application icon.

• Login by ID (for single tracker): Server: www.mytkstar.net. ID No.: on the back cover. Password: Last 4 digits of the ID number.
• Login by Username (for multiple trackers): If you have multiple trackers, click "Sign Up" in the app to register an account. You can then add multiple device ID numbers to your account. Server: www.mytkstar.net. Username: The email used for registration. Password: The password set during registration.
• Real-time Tracking Features: The app allows real-time tracking of the device and your smartphone. Use '+' and '-' to zoom, click the location icon to view different locations, and the 2D/3D icon to change map vision.
  

  Image: Real-time tracking interface on mobile, tablet, and computer.
• Explanation of Other Icons in App:
  • Historical route: View route maps for up to six months by selecting start and end times.
    

    Image: History Route Playback on phone and laptop.

  • Geo fence: Set a virtual boundary. An alarm is generated if the device exits this area.
  • Issue: Send commands to the device.
  • Device info: View device information.
  • Alert message: View alerts generated by the device.
  • Account Info: View account information.
  • Notifications: Turn on/off different alarm types.
• Explanation of Settings in the "Issue" Icon:
  • Set Admin number: Set the phone number that controls the device via SMS and receives alarms.
  • Set SOS number: Set the number that receives SOS messages.
  • Low Battery Alarm Switch: Turn on/off low battery alarm messages.
  • Set Overspeed Alarm: Input speed value to set it.
  • Vibration alarm switch: Turn on/off the vibration alarm. If vibration occurs after 5 minutes of continuous stationary, an alarm is issued.
  • LED: Turn on/off the LED indicator light.
  • Set Language and Timezone: Set language and time zone for SMS tracking messages.
  • GPS work mode setting: Select the upload frequency of device positioning data (factory default is 60 seconds).

5.3 APN Settings

The APN (Access Point Name) settings are crucial for online tracking. If your SIM card is correctly inserted and the device is online on the APP, you may not need to send these commands. Otherwise, you need to set the APN for the tracker.

• Finding APN Content: Check your SIM card carrier's website or insert the SIM card into a cell phone to find the APN details.
• Sending APN Commands via SMS:
  Please note there is a small blank space after "123456" in each command. After successful APN setting, re-insert the SIM card to reboot the device.

Example for SpeedTalk SIM card (US):
APN: Mobilenet
APN username: (none)
APN password: (none)
Send SMS: apn123456 mobilenet
Once you receive apn ok, remove and re-insert the SIM card to reboot the device.

5.4 Device Working Mode Setting

• Sleep by shock sensor mode: (Factory setting is "sleep by shockmode")
  Command: sleep123456 shock
  Reply: sleep shock ok
  In this mode, if no shock is detected for 5 minutes, the tracker enters sleep mode (GPS shut off, GSM in low consumption). Vibration, SMS, or calling the tracker can wake it up.
• Sleep by time mode:
  Command: sleep123456 time
  Reply: sleep time ok
  In this mode, the tracker works for 5 minutes after being woken up, then returns to sleep mode (GPS shut off, GSM in low consumption). SMS commands or calling the tracker can wake it up.

5.5 Reset Hardware

To restore all settings to factory state (except for APN settings):
Command: begin123456
Reply: begin ok

6. Maintenance

• Battery Care: To prolong battery life, avoid using fast chargers. Charge the device fully before first use and when the battery is low.
• Device Handling: Do not attempt to disassemble or reassemble the device. Unauthorized modifications can damage the tracker and void any certifications.
• Cleaning: Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive materials.
• Water Resistance: The TK905B is waterproof, but avoid prolonged submersion or exposure to high-pressure water jets.
• Magnetic Attachment: The powerful magnets ensure secure attachment. Ensure the surface is clean and flat for optimal adhesion.

Image: Powerful magnetic attachment of the GPS tracker to a car.

7. Troubleshooting (FAQ)

• Fail to turn it on:
  Check if the battery is charged.
• No SIM signal:
  
  • Check if the SIM card is installed correctly.
  • Check if the SIM card supports GSM or LTE network.
  • Make sure the SIM card's PIN code is deactivated.
  • Make sure call forwarding is not active on the SIM card.
• No GPS signal:
  For optimal GPS signal reception, place the device in an open area with a clear view of the sky.
• No reply to SMS command:
  
  • Verify the SMS command format is correct.
  • Ensure the SIM card has sufficient balance for SMS and data.
  • Confirm the SIM card supports making calls, sending messages, and GPRS network, and that call display is open and call forwarding is off.
• SMS position OK, but cannot use the APP and web platform:
  Check if the APN settings are correctly configured. Refer to section 5.3 for APN setting instructions.
• Platform position differs from actual position:
  
  • If there's no uploading position time or GPS signal, call the device's phone number to receive a position message.
  • If the reply shows LBS tracking (like Pic 2 in the manual), it means there's no GPS signal, and the position is the last known GPS location.
  • If the reply shows GPS tracking (like Pic 1 in the manual), it means the device hasn't reached its next scheduled upload time.

8. User Tips

• The accompanying mobile application for tracking is free to use for a lifetime, with no subscription fees.
• Remember that the device requires a functional SIM card with an active plan for data and SMS to operate correctly.
• When purchasing, note that there are 2G and 4G versions available, with the 4G version typically being more expensive due to enhanced network capabilities.

9. Safety Information

9.1 Electromagnetic Compatibility

Avoid placing the device near very strong magnetic fields (e.g., transformers), as this may cause variations in transmission, malfunctions, or damage to your Winnes GPS device.

9.2 Risks for Children and People in Need of Care

This device is not intended for use by individuals with limited physical, sensory, or mental abilities, or lack of experience/knowledge, unless supervised by a responsible person or instructed on its use.

9.3 Disposal

Batteries are hazardous waste. Dispose of batteries at commercial battery collection points or local council waste disposal facilities. For the GPS device itself, follow local provisions for disposal. Dispose of packaging materials (cardboard, plastics) according to local recycling guidelines.

10. Certification

10.1 Declaration of Conformity (CE RED Directive 2014/53/EU)

Juneo hereby declares that the Winnes/TKMARS GPS Tracker (item no. TK905/TK905B) conforms to the fundamental requirements and other relevant provisions of directive 2014/53/EU. The full text of the declaration of conformity can be viewed on our website: www.mytkstar.net/en/doc.html.

The product is certified with CE, RoHS, and FCC standards.

11. Warranty and Support

For any technical support or inquiries not covered in this manual, please refer to the official TKSTAR website or contact your retailer. Please retain your proof of purchase for any warranty claims. Specific warranty terms and conditions may vary by region and retailer.