VGEBY LENZOD Metal Scooter Replacement Circuit Board

Contents

LENZOD Electric Scooter Dashboard Instruction Manual

Model: LENZOD Metal Scooter Replacement Circuit Board

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your new LENZOD Electric Scooter Dashboard. This replacement circuit board is designed to offer a clear data display and robust performance for your electric scooter. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Product Features

  • Premium PCB Material: Constructed from high-quality PCB material, ensuring durability, sturdiness, and excellent anti-oxidation properties for long-lasting performance.
  • Clear Data Display: The dashboard panel provides an instant, cool, and clear display of essential data. Power and speed information are easily visible on the screen, enhancing your riding experience.
  • Waterproof Design: Engineered with a great waterproof effect, this dashboard allows for confident and safe riding even in rainy conditions, protecting internal components from moisture damage.
  • Perfect Replacement: An ideal solution for replacing old or damaged electric scooter accessories, designed to seamlessly integrate and improve your scooter's overall performance.
  • Direct Installation: The replacement circuit board is designed for easy installation and disassembly, allowing you to smoothly replace your old dashboard in minutes without complex procedures.

3. Setup & Installation

The LENZOD Electric Scooter Dashboard is designed for direct replacement of your existing scooter dashboard. Follow these steps for a smooth installation:

  1. Preparation: Ensure your scooter is powered off and disconnected from any power source. Gather necessary tools, which typically include screwdrivers.
  2. Remove Old Dashboard: Carefully remove the screws or fasteners holding your old dashboard in place. Gently disconnect all wiring connectors from the old unit. Note the position and type of each connector for re-installation.
  3. Connect New Dashboard: Align the new LENZOD dashboard with the mounting points. Connect the wiring harness from your scooter to the corresponding connectors on the new dashboard. Ensure all connections are secure and correctly seated.
Front view of the LENZOD Electric Scooter Dashboard with various colored wires and connectors.
Front view of the dashboard with wiring for connection.
  1. Secure New Dashboard: Once all connections are made, secure the new dashboard in place using the original screws or fasteners. Do not overtighten.
  2. Initial Test: Power on your scooter and check if the dashboard lights up and displays information correctly. Test basic functions like speed display, mode changes, and headlight indicators.
LENZOD Electric Scooter Dashboard labeled as a replacement part.
The dashboard is designed as a direct replacement part.

4. Operating Instructions

The LENZOD Electric Scooter Dashboard provides clear, real-time information about your scooter's status. Here's how to interpret the display:

Close-up of the dashboard display showing speed (km/h, mph), mode (Eco, D, S), headlight, battery, and temperature indicators.
Clear data display showing various indicators.
  • Speed Display: The large numerical display shows your current speed in either kilometers per hour (km/h) or miles per hour (mph). The unit can typically be toggled via a button on the scooter's controls.
  • Riding Modes: Indicators for different riding modes are present:
    • Eco: Economy mode, typically for extended range and lower speed.
    • D: Drive mode, a balanced mode for general riding.
    • S: Sport mode, for maximum speed and acceleration.
  • Headlight Indicator: An icon resembling a headlight illuminates when your scooter's headlight is active.
  • Battery Level: A segmented bar or icon indicates the remaining battery charge. Ensure to charge your scooter when the level is low.
  • Temperature Indicator: An icon resembling a thermometer may indicate the motor or system temperature. If this icon flashes or shows an unusually high reading, reduce usage and allow the scooter to cool down.

5. Maintenance

To ensure the longevity and optimal performance of your LENZOD Electric Scooter Dashboard, follow these maintenance guidelines:

  • Cleaning: Wipe the display and surrounding areas with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the screen or plastic.
  • Water Resistance: The dashboard features a waterproof design, allowing for use in rain. However, avoid submerging the dashboard or exposing it to high-pressure water jets to prevent damage.
  • Connection Checks: Periodically inspect the wiring connections to ensure they are secure and free from corrosion or damage.
  • Storage: When not in use for extended periods, store the scooter in a dry, cool place away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter issues with your LENZOD Electric Scooter Dashboard, refer to the following common problems and solutions:

  • Dashboard Not Turning On:
    • Check all wiring connections to ensure they are firmly seated. A loose connection is a common cause.
    • Verify that the scooter's main power supply is functioning correctly and the battery has sufficient charge.
    • If the issue persists after checking connections and power, the circuit board may be faulty.
  • Incorrect Data Display:
    • Ensure all sensors (e.g., speed sensor) are properly connected and clean.
    • If speed or other data appears incorrect, try restarting the scooter.
  • Intermittent Functionality:
    • Inspect wiring for any signs of damage, fraying, or loose insulation.
    • Ensure the dashboard is securely mounted and not experiencing excessive vibration.

For complex issues not covered here, please contact customer support.

7. Specifications

AttributeDetail
Item TypeElectric Scooter Dashboard
Product MaterialPCB
Gross Weight25g / 0.8oz
Dimensions (Approx.)Length: 11 cm (4.3 in), Width: 8 cm (3.1 in), Height: 2 cm (0.8 in)
CompatibilitySuitable for LENZOD controller
Package Contents1 x Electric Scooter Circuit Board

8. User Tips

  • Verify Connector Type: Before purchasing or installing, carefully check the pin configuration of your scooter's existing dashboard connector. Some users have noted needing a specific 5-pin connector. Ensure the new dashboard matches your scooter's requirements.
  • Check Scooter Compatibility: While designed for LENZOD controllers, always confirm compatibility with your specific scooter model (e.g., 'iscooter i9max') to avoid installation issues.
  • Direct Replacement: This dashboard is intended as a direct replacement. If your old dashboard is simply damaged or non-functional, this unit should swap in easily.
  • Professional Installation: If you are unsure about the installation process, consider seeking assistance from a qualified technician to prevent damage to the dashboard or your scooter.

9. Warranty & Support

For any questions, technical assistance, or warranty claims regarding your LENZOD Electric Scooter Dashboard, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.