1. Introduction
Thank you for choosing the XIAOMI MIJIA Electric Oral Irrigator F400. This portable water flosser is designed to provide effective and comfortable oral cleaning. Please read this user manual carefully before use and keep it for future reference to ensure proper operation and maintenance.
The MIJIA F400 features a compact, pull-out design, making it easy to carry for daily use, at the office, or while traveling.

Image: The Mijia F400 Oral Irrigator is shown in different usage scenarios, highlighting its portability for workplace, dining, and business travel.
2. Safety Instructions
2.1 Warnings
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- This appliance contains non-replaceable batteries.
- Only use a safety extra-low voltage DC power supply with an output of 5V and current of 1A for charging.
- Do not use this product if you are unfamiliar with the operating procedures and safety instructions, to avoid injury due to improper operation.
- Users with periodontal disease or those who have undergone oral surgery in the past six months should use this product under the guidance of a dentist.
- Do not operate this product in any way other than described in this manual.
- Do not use this product for any purpose other than oral cleaning.
- Do not press the nozzle forcefully against your gums or teeth to avoid injury.
- This product is not a toy; keep it out of reach of children.
- Do not disassemble or modify this product. This may cause fire or personal injury. For repairs, please contact after-sales service.
2.2 Cautions
- Do not use this product without a nozzle attached.
- Do not fill the water tank with water hotter than 40℃ to avoid scalding.
- If you have wounds in your mouth or on your tongue, do not use this product to avoid unnecessary injury. Consult a doctor before use.
- Always empty the water tank after use and run the irrigator for a few seconds to drain residual water, preventing bacterial growth, odors, or malfunctions.
- When charging, ensure the water tank is pushed back into the main body.
2.3 General Tips
- Illustrations of the product, accessories, and user interface in this manual are for schematic purposes only and may differ slightly from the actual product due to updates and upgrades. Please refer to the actual product.
- Read this manual carefully before using the product and keep it in a safe place.
- Do not damage, modify, forcibly bend, pull, or twist the charging cable.
- Do not place the product in high temperature or humid environments, and avoid direct sunlight.
- The product has a built-in rechargeable battery. Do not throw it into fire, heat it, or charge/use/store it in high-temperature areas, as this may cause overheating, fire, or explosion.
- Do not plug or unplug the power adapter and charging cable with wet hands to avoid electric shock.
- Before charging, ensure the charging port and charging cable are dry to prevent short circuits.
- Do not drop or insert foreign objects into the charging port to avoid electric shock or short circuits.
- If the product is not used for a long time, fully charge it before storage, and then fully charge it once every 6 months.
- Cleaning and user maintenance should not be performed by children without supervision.
3. Product Overview
Familiarize yourself with the components of your MIJIA Electric Oral Irrigator F400:

Image: Diagram showing the main components including the main body, water tank, nozzles, and charging cable.
- Main Body: The core unit containing the motor and controls.
- Nozzle Release Button: Used to detach the nozzle.
- Power Button: To turn the device on/off.
- Mode Switch Button: To cycle through different cleaning modes.
- Indicator Lights: Display current mode and battery status.
- Water Tank: Removable reservoir for water.
- Water Tank Cover: Covers the water inlet.
- Water Inlet/Nozzle Storage Compartment: Where water is added and nozzles can be stored.
- Charging Port: Type-C port for charging.
- Charging Port Silicone Plug: Protects the charging port from water.
- Nozzle Installation Hole: Where nozzles are attached.
- Cloud Sense Multi-effect Nozzle: For gentle, wide-coverage cleaning.
- Standard Nozzle: For daily and deep cleaning.
- Orthodontic Nozzle: For cleaning around braces.
- Type-C Charging Cable: For recharging the device.
- Storage Bag: For convenient portability.
- Quick Guide & User Manual: Documentation.
Video: An official product video demonstrating the features and usage of the MIJIA Electric Oral Irrigator F400, including its compact design, nozzle types, and cleaning effectiveness.
4. Setup
4.1 Charging
Before first use, fully charge the oral irrigator.
- Connect the provided Type-C charging cable to the charging port on the device.
- Connect the other end of the cable to a 5V/1A power adapter (not included).
- The battery indicator lights will show the charging status. A full charge takes approximately 4 hours.
Note: Charge the product at room temperature between 0℃ and 35℃. Charging will not occur below 0℃.

Image: Close-up showing the Type-C charging port and highlighting the food-contact grade material of the water tank.
Battery Indicator Light Status:
| Irrigator Status | Power Level | Indicator Light Status |
|---|---|---|
| Working | 40%-100% | White solid |
| 20%-40% | Orange solid | |
| 10%-20% | Orange slow flash | |
| <10% (Cannot power on) | Orange fast flash | |
| Charging | 100% | White solid |
| <100% | Orange flashing |
4.2 Filling the Water Tank
- Pull the water tank downwards until it reaches the limit mark on the main body.
- Open the top water tank cover and rotate it 180 degrees.
- Hold the irrigator vertically and pour an appropriate amount of water into the water inlet.
- Close the water tank cover securely.

Image: A close-up showing how to fill the water tank by pulling it down and pouring water into the inlet.
Tips: It is recommended to use warm water below 40℃ or tap water. Do not add toothpaste, salt, solid mouthwash tablets, or mouthwash containing isopropyl myristate, as this may clog or damage the irrigator.
4.3 Nozzle Types and Installation
The MIJIA F400 comes with different nozzles for various cleaning needs:
- Cloud Sense Multi-effect Nozzle: Emits an umbrella-shaped double-layer water flow, providing 7 times larger cleaning coverage. It offers gentle and efficient cleaning of tooth gaps and gumlines, especially suitable for beginners and users with sensitive gums.
- Standard Nozzle: Effectively cleans food residue and plaque in tooth gaps and pits, helping to prevent cavities and tartar. Suitable for daily cleaning or users requiring deep cleaning.
- Orthodontic Nozzle: Designed for cleaning complex areas around braces and other orthodontic appliances.

Image: Illustrates the Cloud Sense Multi-effect Nozzle, Standard Nozzle, and Orthodontic Nozzle, along with the included storage bag.
Nozzle Replacement: If the nozzle tip deforms, replace it promptly to avoid product malfunction. It is recommended to replace nozzles every 3 to 6 months.
Installing/Removing a Nozzle:
- Insert the desired nozzle vertically into the nozzle installation hole until you hear a "click" sound, indicating it is securely in place.
- To remove, press and hold the nozzle release button, then pull the nozzle upwards.
Caution: Do not press the nozzle release button during use to prevent the nozzle from ejecting and causing accidental injury.
5. Operating Instructions
5.1 Power On/Off
Short press the Power Button to turn the oral irrigator on or off.
Tips: The product has a 2-minute timer function and will automatically turn off after 2 minutes of continuous use. If you need to continue using it, short press the power button again. In standard mode with a full water tank, it can clean continuously for approximately 50 seconds. Usage duration may vary across different modes.

Image: Close-up of the power and mode buttons, indicating that pressing the switch stops the device immediately, making it user-friendly for new users.
5.2 Switching Modes
Short press the Mode Switch Button to cycle through the four available modes:
- Gentle Mode: Mild water pressure, suitable for novice users and sensitive gums.
- Standard Mode: Standard water pressure, efficient for daily post-meal cleaning.
- Strong Mode: Powerful water pressure, ideal for stubborn residue cleaning and deep cleaning. This mode features a 3-second gradual increase in water pressure after activation.
- Massage Mode: Variable frequency pulse water pressure, designed to massage gums and alleviate gum discomfort.
Tips: The product has a mode memory function, so it will default to the last used mode when powered on again.

Image: Illustrates the four optional modes: Soft, Standard, Strong, and Massage, with descriptions of their suitability.
5.3 How to Use the Oral Irrigator
- Hold the oral irrigator vertically and lean over a washbasin.
- Short press the Mode Switch Button to select your desired mode.
- Insert the nozzle into your mouth, aiming it at the gaps between your teeth or along the gumline.
- Short press the Power Button to start the irrigator.
- Close your lips slightly to prevent water splashing, while leaving a small gap for water to drain into the washbasin.
- Maintain a 90° angle between the water jet and your gumline. It is recommended to start cleaning from the back teeth, slowly moving the nozzle along the gumline towards the front teeth, pausing briefly at each tooth gap.
- After use, empty any remaining water from the tank. Then, run the irrigator for a few seconds to expel any residual water from inside the device.
- Once the water is drained, open the top water tank cover and leave it in a well-ventilated area to air dry. After the inside of the water tank is dry, push it back into position and close the cover.

Image: A person demonstrating the correct way to use the oral irrigator, showing the nozzle positioned in the mouth.
Important:
- Always place the nozzle in your mouth before pressing the power button.
- Do not aim the water jet directly at your gums.
- Do not press the nozzle forcefully against your teeth or gums. Doing so in Strong mode may activate the stall protection (the irrigator will automatically pause, and the 4 white indicator lights will flash for 10 seconds before turning off. Restart the device by short pressing the power button to resume normal operation).
6. Maintenance and Care
6.1 Daily Cleaning
- After each use, hold the main body with one hand and the water tank with the other, then pull the water tank downwards with slight force to remove it and empty any remaining water.
- Turn on the irrigator and let it run briefly to expel any residual water from inside, then press the power button to turn it off.
- Align the water tank with the main body and push it upwards with slight force to reattach it.
- Remove the nozzle, rinse it with water, wipe it dry, and store it in the nozzle storage compartment within the main body.
Tips:
- Do not use water hotter than 40℃ for cleaning.
- Do not use corrosive liquids, thinners, alcohol, or similar substances to clean this product.
- The main body and water tank can be wiped with a damp cloth or rinsed with clean water. Wipe dry after cleaning.
- If there is limescale inside the water tank, use a brush to clean it.
- If the product will not be used for a long time, clean it thoroughly, allow it to dry completely, and then store it.
- Ensure the inside of the water tank and the surface of the main body are dry before reassembling the water tank.
6.2 Periodic Maintenance (Descaling)
To ensure optimal product performance, it is recommended to perform periodic maintenance every 1 to 3 months:
- Fill the water tank with warm water (not exceeding 40℃) and add one tablespoon of white vinegar.
- Turn on the irrigator and let it run until the water tank is empty.
- After the water tank is empty, let the irrigator continue to run for approximately 1 minute until it automatically turns off.
- Refill the water tank with warm water (not exceeding 40℃), press the power button to turn it on, and let it run again until the water tank is empty.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Indicator light not on during charging | Power connection abnormal | Check power connection |
| Short working time after charging | Charging time too short / Insufficient power | Charge the product fully |
| Cannot power on | Insufficient power | Charge the product |
| Low water pressure | Nozzle clogged with dirt / Nozzle tip damaged / Water pipe clogged | Replace nozzle / Clean water pipe bottom |
8. Specifications
| Attribute | Value |
|---|---|
| Product Name | MIJIA Portable Oral Irrigator F400 |
| Product Model | ME0704 |
| Brand Name | XIAOMI |
| Rated Voltage/Power | 3.7V === 12W |
| Charging Voltage/Current | 5V === 1A |
| Waterproof Grade | IPX7 |
| Charging Time | Approx. 4 hours |
| Water Tank Volume | 200ml - 299ml (200ml stated in image) |
| Jet Pulsation Frequency | 1600 - 1999 imp/min |
| Water Jet Principle | PULSE |
| Power Type | Rechargeable |
| Number of Operating Modes | 4 or more |
| Batteries Included | Yes |
| Number of Nozzles | 3 |
| Power Source | Rechargeable battery |
| Commodity Quality Certification | CE |
| Origin | Mainland China |
| Age Group | Adults |
| Item Type | Oral Irrigator |
| Standards | GB/T 4706.1-2024, GB/T 4706.59-2024, GB 39669-2020 |

Image: Dimensions of the irrigator: 143mm (height), 69mm (width), with a nozzle length of 99mm.
9. User Tips
- Initial Use Comfort: If you're new to oral irrigators, start with the Gentle Mode and the Cloud Sense Multi-effect Nozzle for about a week. This allows your gums to adapt to the sensation.
- Nozzle Maintenance: Regularly check your nozzles for any signs of wear or deformation. Replacing them every 3-6 months ensures optimal cleaning performance and prevents potential issues.
- Water Quality: Always use clean, warm water (below 40°C) for the best experience and to prolong the life of your device. Avoid adding any harsh chemicals or substances that could damage the internal components.
10. Warranty & Support
The MIJIA Portable Oral Irrigator F400 product after-sales service strictly adheres to the "Consumer Rights Protection Law of the People's Republic of China" and the "Product Quality Law of the People's Republic of China," implementing a three-guarantee service. The service content is as follows:
10.1 Warranty Policy
- Within 7 days from the date of receipt: If the product exhibits performance faults listed in the "MIJIA Portable Oral Irrigator F400 Performance Fault Table," confirmed by a Xiaomi after-sales service center, you are entitled to free return or exchange services.
- Within 8-15 days from the date of receipt: If the product exhibits performance faults listed in the "MIJIA Portable Oral Irrigator F400 Performance Fault Table," confirmed by a Xiaomi after-sales service center, you are entitled to free exchange or repair services.
- Within 12 months from the date of receipt: If the product exhibits performance faults listed in the "MIJIA Portable Oral Irrigator F400 Performance Fault Table," confirmed by a Xiaomi after-sales service center, you are entitled to free repair services.
10.2 MIJIA Portable Oral Irrigator F400 Performance Fault Table
| Name | Performance Faults |
|---|---|
| MIJIA Portable Oral Irrigator F400 |
|
10.3 Non-Warranty Conditions
- Unauthorized repair, misuse, collision, negligence, abuse, liquid ingress, accident, alteration, improper use of non-original accessories, or tearing/altering labels or anti-counterfeit marks.
- Exceeding the three-guarantee validity period.
- Damage caused by force majeure.
- Performance faults not listed in the "MIJIA Portable Oral Irrigator F400 Performance Fault Table."
- Performance faults listed in the "MIJIA Portable Oral Irrigator F400 Performance Fault Table" caused by human factors to the product and its accessories.
10.4 Support Information
Service Phone: 950816
Service Website: www.mi.com/service
Entrusting Party: Xiaomi Communications Technology Co., Ltd.
Manufacturer: Shenzhen Soocare Technology Co., Ltd.
Note: Due to structural design reasons, repair service for this product is typically provided by replacement.
11. Environmental Protection & Battery Disposal
When the product reaches the end of its service life, the internal battery must be removed for recycling and proper disposal in accordance with the laws and regulations of your country or region before discarding. If the battery cannot be removed, it is recommended to dispose of it strictly in accordance with local household waste classification regulations.
Warnings:
- Do not throw the battery into fire to prevent battery explosion or the release of toxic and harmful substances.
- Do not short-circuit the battery to prevent battery combustion and fire.
- Do not disassemble this product yourself unless it is for disposal. Premature disassembly will damage the product.
- Operations must follow basic safety precautions. Before removing the battery, the power connection must be disconnected.
- The battery must be removed from the appliance before it is discarded.
- The appliance must be disconnected from the supply mains when removing the battery.
- The battery should be disposed of safely.
Battery Removal Procedure:
- Remove the water tank.
- Use a flat-head screwdriver to pry open the top cover of the machine.
- Unscrew the two fixing screws at the top of the core.
- Use a flat-head screwdriver to pry open the bottom cover and remove the core.
- Cut the connecting wires between the battery and the main board, then remove the battery.
Caution: Ensure that the positive and negative terminals of the battery do not short-circuit. After removing the battery, do not power on the product again.
Hazardous Substances Information Table
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBBs) | Polybrominated Diphenyl Ethers (PBDEs) | Dibutyl Phthalate (DBP) | Butyl Benzyl Phthalate (BBP) | Di-(2-ethylhexyl) Phthalate (DEHP) | Diisobutyl Phthalate (DIBP) |
|---|---|---|---|---|---|---|---|---|---|---|
| Irrigator Body | X | O | O | O | O | O | O | O | O | O |
| Battery | O | O | O | O | O | O | O | O | O | O |
| Type-C Charging Cable | O | O | O | O | O | O | O | O | O | O |
| Accessories | O | O | O | O | O | O | O | O | O | O |
Note 1: O: Indicates that the content of this hazardous substance in all homogeneous materials of this component is below the national standard requirements for restricted use of hazardous substances in electrical and electronic products.
Note 2: X: Indicates that the content of this hazardous substance in at least one homogeneous material of this component exceeds the national standard requirements for restricted use of hazardous substances in electrical and electronic products. Components not listed above indicate that their hazardous substance content does not exceed the national standard requirements.