1. Introduction
Thank you for choosing the MEKEDE AHD 1080P Backup Camera. This camera is designed to enhance your vehicle's safety by providing a clear, wide-angle view of the area behind your car. Featuring AHD 1080P resolution, IP68 waterproof rating, advanced night vision capabilities, and a 170° viewing angle, this device ensures reliable performance in various conditions. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your product.
2. Package Contents
Verify that all items listed below are included in your package:
Figure 2.1: Package Contents
- MEKEDE AHD 1080P Camera
- Packing Box
- Mounting Screws (x2)
- Camera Power Cord
- Extension Cord (6 meters)
- Double-sided Tape
3. Specifications
Figure 3.1: Core Technology Features
| Feature | Specification |
|---|---|
| Resolution | AHD 1080P |
| Viewing Angle | 170° |
| Waterproof Rating | IP68 |
| Night Vision | Yes (Starlight Night Vision, 2053 chip) |
| Guiding Line | Yes (Auxiliary Track) |
| Lens Material | Glass (6 lenses, 833B lens) |
| Shell Material | Plastic (ABS) |
| Connection Type | Wired |
| Video Cable Length | 6 meters |
| Alarm Type | Rear Side |
| Certifications | CE, FCC |
| Origin | Mainland China |
4. Setup and Installation
Proper installation is crucial for optimal performance. Please follow these steps carefully.
4.1 Mounting Options
The camera can be installed in two primary locations:
- Backside Windshield: Mount the camera on the interior backside windshield for a discreet installation.
- Car License Plate: Install the camera near your car's license plate for a common exterior mounting solution.
Figure 4.1: Mounting Location Examples
4.2 Wiring Diagram and Connection
Refer to the diagram below for detailed wiring instructions:
Figure 4.2: Wiring Diagram
- Connect the Red cable of the camera power cord to the vehicle's backup light positive (+) terminal.
- Connect the Black cable of the camera power cord to the vehicle's backup light negative (-) terminal (ground).
- The reversing detection cable (often brown in color) should be connected to the red cable extending from the video input cable (which connects to your monitor). This signals the monitor to switch to the camera view when reversing.
- If there is a fourth cable (labeled as '4' in some diagrams), it typically does not need to be connected for standard operation.
Ensure all connections are secure and properly insulated to prevent short circuits or damage.
5. Operating Instructions
Once installed, the MEKEDE AHD 1080P Backup Camera operates automatically when your vehicle is put into reverse gear, provided it is correctly wired to your monitor system.
5.1 Key Features in Operation
- AHD 1080P High Definition: Provides a clear and detailed image on your compatible monitor, ensuring you can see obstacles and surroundings with precision.
- 170° Wide Viewing Angle: Offers an expansive field of view, significantly reducing blind spots compared to standard rearview mirrors. This helps in maneuvering and parking safely.
- Enhanced Night Vision: Equipped with a 2053 photosensitive chip and 6 high-quality lenses, the camera delivers clear images even in low-light conditions without reflection during the day or glare at night.
- Guiding Lines: The camera system automatically displays auxiliary parking lines on your monitor when reversing, assisting you in judging distances and parking accurately.
Figure 5.1: Day and Night Vision Performance
Figure 5.2: 170 Degree Wide Angle View
Figure 5.3: Image Quality Comparison
6. Maintenance
To ensure the longevity and optimal performance of your MEKEDE Backup Camera, follow these maintenance guidelines:
- Cleaning: Regularly clean the camera lens with a soft, damp cloth to remove dirt, dust, or water spots that may obstruct the view. Avoid abrasive cleaners.
- Waterproof Design: The camera is IP68 rated, meaning it is highly resistant to dust and water immersion. However, avoid directing high-pressure water jets directly at the camera for extended periods.
- Cable Inspection: Periodically check the wiring for any signs of wear, damage, or loose connections. Secure any loose cables to prevent interference or disconnection.
- Environmental Factors: While designed for outdoor use, extreme temperatures or prolonged direct sunlight can affect electronic components over time.
Figure 6.1: IP68 Waterproof Feature
7. Troubleshooting
If you encounter issues with your backup camera, refer to the following common problems and solutions:
- No Image on Monitor:
- Check all power connections to the camera and monitor. Ensure they are secure and receiving power.
- Verify the video cable connection between the camera and monitor.
- Ensure the reversing detection wire is correctly connected to trigger the monitor.
- Confirm your monitor is set to the correct input source.
- Flickering or Distorted Image:
- Check for loose or damaged video cable connections.
- Ensure the power supply to the camera is stable (12V).
- Inspect the camera lens for dirt or condensation.
- Poor Night Vision:
- Clean the camera lens thoroughly.
- Ensure there are no obstructions blocking the camera's view.
If the problem persists after trying these steps, please contact customer support.
8. User Tips
- Installation Clarity: Many users find detailed installation instructions helpful. Always double-check your wiring against the provided diagram, especially the power and trigger connections, to ensure the camera activates correctly when reversing.
- Cable Management: When routing cables, ensure they are tucked away safely, avoiding moving parts, sharp edges, and areas exposed to excessive heat or moisture. Use cable ties to secure them.
- Test Before Finalizing: Before permanently mounting and securing all components, perform a functional test of the camera system to ensure everything is working as expected.
9. Warranty and Support
Figure 9.1: Warranty Information
Manufacturer's Limited Warranty: This product comes with a 12-month manufacturer's limited warranty for defective items, starting from the date of receipt. This warranty excludes items damaged and/or misused after receipt. Accessories included with the product are covered by a 3-month warranty.
Warranty Claims: Defective items MUST be reported and returned within the specified warranty period. Returns must include the original packaging if possible. You must provide details of the defect and your order number. Items with an expired warranty will not be repaired or replaced.
For support or warranty claims, please contact your seller with your order details.
10. Additional Resources
A more detailed user manual, including additional diagrams and information, is available in PDF format. Please refer to the official product page or contact customer support for access to the PDF document.