Erilles DS-200ML

Contents

DS-200ML Multi-Function Electronic Calculator User Manual

Model: DS-200ML | Brand: Erilles

1. Introduction

Thank you for choosing the Erilles DS-200ML Multi-Function Electronic Calculator. This manual provides essential information for the safe and efficient operation of your new calculator. Please read it thoroughly before use and keep it for future reference.

This calculator features a large 12-digit LCD display, dual power capabilities (solar and battery), and a range of common computing functions, making it ideal for both office and school environments.

2. Safety Warnings and Precautions

2.1. Warnings

  • Before use, ensure the product is intact.
  • Follow the instructions included in the packaging.
  • Do not ingest or allow contact with food.

2.2. Precautions

  • Before use, ensure the product is intact.
  • Avoid prolonged operation under excessive load.
  • Keep away from high-temperature environments.

3. Setup

3.1. Power Source

The DS-200ML calculator operates on a dual power system: solar and battery. The solar panel provides power in well-lit conditions, while a button battery (included) ensures operation in low light or dark environments. No need to replace the battery frequently when solar power is available.

3.2. Battery Installation

The calculator comes with a button battery pre-installed. If replacement is needed:

  1. Turn the calculator over to access the battery compartment on the back.
  2. Carefully open the battery cover.
  3. Insert one button battery (Coin Batteries type) with the correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery cover securely.
Back of the DS-200ML calculator with the battery compartment open, showing where to insert a button battery.
Figure 1: Battery compartment and installation.

4. Operating Instructions

The DS-200ML calculator features a standard layout for ease of use. Below are the key functions:

Top-down view of the DS-200ML calculator showing all keys and the 12-digit LCD display.
Figure 2: Calculator layout and display.

4.1. Basic Operations

  • ON/C (On/Clear): Turns the calculator on. Press once to clear the current entry (CE), press twice to clear all calculations and memory (AC).
  • Number Keys (0-9, 00, .): Input numerical values.
  • Arithmetic Operators (+, -, ×, ÷): Perform addition, subtraction, multiplication, and division.
  • = (Equals): Displays the result of a calculation.

4.2. Advanced Functions

  • % (Percentage): Calculates percentages.
  • √ (Square Root): Calculates the square root of the displayed number.
  • +/- (Sign Change): Changes the sign of the displayed number (positive to negative, or vice versa).
  • AC (All Clear): Clears all entries and memory.
  • CE (Clear Entry): Clears the last entered number or operation.
  • MU (Mark Up): Used for calculating selling prices based on cost and desired profit margin.

4.3. Memory Functions

  • MC (Memory Clear): Clears the memory content.
  • MR (Memory Recall): Recalls the memory content to the display.
  • M+ (Memory Plus): Adds the displayed number to the memory.
  • M- (Memory Minus): Subtracts the displayed number from the memory.

4.4. Grand Total (GT)

  • GT (Grand Total): Accumulates the results of all calculations performed since the last GT clear. Pressing GT will display the grand total.

4.5. Automatic Shutdown

The calculator features an automatic shutdown function to conserve power. If left idle for a certain period, it will automatically turn off.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the calculator. Do not use liquid cleaners or abrasive materials.
  • Storage: Store the calculator in a cool, dry place, away from direct sunlight and high temperatures.
  • Handling: Avoid dropping the calculator or subjecting it to strong impacts.
  • Battery: If the calculator is not to be used for an extended period, it is advisable to remove the button battery to prevent leakage.

6. Troubleshooting

  • Calculator does not turn on:
    • Ensure there is sufficient light for the solar panel to operate.
    • Check if the button battery is correctly installed and not depleted. Replace if necessary.
  • Incorrect calculations:
    • Press the AC button to clear all previous calculations and memory, then re-enter your calculation.
    • Ensure correct input of numbers and operations.
  • Display is dim or flickering:
    • This may indicate a low battery. Replace the button battery.
    • Ensure adequate lighting for solar power.

7. Specifications

FeatureDetail
Model NumberDS-200ML (QX0001)
BrandErilles
Max. Digits12
Power SourceSolar / Button Battery (Coin Batteries)
Battery IncludedYes
MaterialABS
StylePocket
Dimensions (L x W x H)Approx. 165mm x 165mm x 19mm
CertificationCE
Voice PromptsNo
DS-200ML calculator with dimensions 16.5cm by 16.5cm indicated.
Figure 3: Calculator dimensions.

8. User Tips

  • For optimal solar power performance, use the calculator in a well-lit area.
  • Familiarize yourself with the memory functions (M+, M-, MR, MC) to streamline complex calculations.
  • The "00" key can quickly input two zeros, saving time for larger numbers.
  • Always double-check your input before pressing the equals key to avoid errors.

9. Warranty and Support

If you encounter any quality-related issues with the product, please contact customer service for assistance. Refer to the original packaging or seller's information for specific contact details.

A digital version of this user manual is available for download: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.