Introduction
Thank you for choosing the UGREEN Max5c Wireless Bluetooth Headphones. These headphones are designed to provide an immersive audio experience with advanced features such as Hybrid Active Noise Cancellation, Hi-Res Audio with LDAC decoding, Spatial Audio, and an ultra-long battery life. This manual will guide you through the setup, operation, and maintenance of your new headphones.

Image: UGREEN Max5c Wireless Bluetooth Headphones (Black)
Package Contents
Please check the package for the following items:
- UGREEN Max5c Wireless Bluetooth Headphones
- User Manual
- Charging Cable (USB-C)
- Detachable Audio Cable

Image: UGREEN Max5c headphones with USB-C charging cable and detachable audio cable.
Setup
1. Charging the Headphones
- Connect the provided USB-C charging cable to the charging port on the headphones.
- Connect the other end of the cable to a compatible USB power source (e.g., wall adapter, computer USB port).
- The LED indicator on the headphones will show the charging status.
- A full charge takes approximately 1.5 hours. A 5-minute charge can provide up to 5 hours of playtime.
2. Power On/Off
- Power On: Press and hold the Power button for approximately 3 seconds until the LED indicator lights up.
- Power Off: Press and hold the Power button for approximately 3 seconds until the LED indicator turns off.
3. Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the Power button for about 5 seconds until the LED indicator flashes rapidly (usually blue/red), indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "UGREEN Max5c" from the list of devices.
- Once connected, the LED indicator will typically show a solid blue light or flash slowly.
4. Dual Connection
The Max5c headphones support dual connection, allowing you to connect to two devices simultaneously (e.g., a smartphone and a laptop). To use this feature:
- Connect the headphones to the first device via Bluetooth as described above.
- Disconnect Bluetooth on the first device. The headphones will re-enter pairing mode.
- Connect the headphones to the second device.
- Reconnect Bluetooth on the first device. The headphones should now be connected to both devices.

Image: Dual Connection feature, allowing simultaneous connection to two devices.
5. Wired Connection
For a wired audio experience or when the battery is depleted, use the provided detachable audio cable:
- Plug one end of the audio cable into the 3.5mm audio jack on the headphones.
- Plug the other end into the 3.5mm audio output of your device.
Operating Instructions
1. Basic Controls
The headphones feature control buttons for easy management of audio and calls:
- Volume Up/Down: Use the dedicated volume buttons.
- Play/Pause: Press the Multi-function button once.
- Next Track: Double-press the Multi-function button.
- Previous Track: Triple-press the Multi-function button.
- Answer/End Call: Press the Multi-function button once during an incoming call or active call.
- Reject Call: Press and hold the Multi-function button for 2 seconds during an incoming call.
2. Active Noise Cancellation (ANC)
The Max5c headphones feature 43dB Hybrid Active Noise Cancellation to reduce ambient noise. You can switch between different ANC modes:
- Adaptive Noise Cancelling: Automatically adjusts noise cancellation based on your environment.
- Gentle Mode: Ideal for quiet places, providing a subtle reduction in background noise.
- General Mode: Suitable for moderately noisy environments.
- Ultra Mode: Designed for extremely noisy places, offering maximum noise reduction.
Use the dedicated ANC button to cycle through the available modes.

Image: Adaptive Noise Cancelling modes for various environments.
3. Spatial Audio
Experience a three-dimensional listening environment with Spatial Audio support. This feature enhances immersion, making audio feel like it's coming from all around you.

Image: Spatial Audio Supported, creating a three-dimensional listening experience.
4. UGREEN App Functions
Download the UGREEN App to unlock additional features and customization options:
- Check battery level.
- View connection status.
- Select from 8 preset EQ sound effects (Classic, Jazz, Electronic, Popularity, Classical, Rock, Bass, Treble).
- Customize your settings.
- Control noise cancellation and awareness modes.
- Activate Gaming Mode.

Image: UGREEN App interface displaying various EQ sound effects.
5. Low Latency Gaming Mode
Activate the gaming mode via the UGREEN App for an ultra-low latency of 0.06s, providing a more synchronized audio experience for gaming.

Image: 0.06s Ultra Low Latency for an enhanced gaming experience.
6. Crystal-Clear Calls
The headphones are equipped with microphones that enhance voice pick-up, ensuring your voice is clear during calls, even in noisy environments.

Image: Crystal-Clear Calls feature, ensuring clear communication.
Maintenance
Cleaning
- Wipe the headphones with a soft, dry cloth.
- Do not use abrasive cleaners or solvents.
- Keep the charging port free of dust and debris.
Storage
- Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
- The foldable design allows for compact storage, protecting them during travel.
Battery Care
- To prolong battery life, avoid fully discharging the headphones frequently.
- Charge the headphones regularly, even if not in use for extended periods.
Troubleshooting
- Headphones not turning on: Ensure the headphones are charged.
- Cannot pair with device: Make sure the headphones are in pairing mode (flashing LED) and within range. Try restarting both the headphones and your device.
- No sound: Check volume levels on both the headphones and your device. Ensure the correct audio output is selected on your device. If using wired mode, ensure the cable is fully inserted.
- ANC not effective: Ensure the earcups form a good seal around your ears. Try switching between ANC modes.
- Microphone issues: Ensure the microphone is not obstructed. Check your device's settings to confirm the headphone microphone is selected for calls.
- Intermittent connection: Move closer to your device and away from potential sources of interference (e.g., Wi-Fi routers, other Bluetooth devices).
Specifications

Image: Detailed Specifications for UGREEN Max5c Headphones.
| Feature | Specification |
|---|---|
| Product Name | UGREEN HiTune Max5c Noise-Cancelling Headphones |
| Model | Max5c (HP203) |
| Max. RF Output Power | 4dBm |
| Bluetooth Version | 5.4 |
| Transmission Distance | 10m/33ft Max (No Blocking) |
| Frequency Band | 2400-2483.5MHz |
| Bluetooth Profile | HFP/AVRCP/A2DP/BLE/SPP |
| Codecs | AAC, SBC, LDAC |
| Frequency Response | 20Hz-40kHz |
| Charging Port | USB-C |
| Battery Type | Polymer Lithium-ion Battery |
| Battery Capacity | 600mAh 3.7V (2.22Wh) |
| Limited Charging Voltage | 5.25V |
| Charging Input | 5V-800mA |
| Charging Time | About 1.5 Hours |
| Operating Time | 75 Hours (ANC OFF), 45 Hours (ANC ON) |
| Material | Metal |
| Earcups Type | Sealed |
| With Microphone | Yes |
| Is Wireless | Yes |
| Support APP | Yes |
| Active Noise-Cancellation | Yes |
| Volume Control | Yes |
| Control Button | Yes |
| Vocalism Principle | Dynamic |
| Wireless Type | Bluetooth |
| Communication | Wireless+Wired |
| Certification | CE, FCC, KC, WEEE, BQB |
| Origin | Mainland China |
User Tips
- Console Compatibility: While the headphones offer Bluetooth connectivity, direct Bluetooth audio for gaming consoles like PS4, PS5, Xbox One, or Xbox Series X/S is often limited to audio output only, and microphone functionality may not be supported without a specific adapter or wired connection. Check your console's compatibility for Bluetooth headsets.
- Microphone Performance: Users report good microphone performance for calls. Ensure the microphone is clear and not covered for optimal clarity.
- Ear Cushion Replacement: The ear cushions are designed for comfort with memory foam and softprotein leather. While not explicitly stated as user-replaceable, this is a common question for headphones, suggesting users value this flexibility.
- LDAC Decoder: For optimal Hi-Res audio quality with LDAC, use the headphones in an interference-free environment to prevent high power consumption and potential lagging.
Warranty and Support
The UGREEN Max5c Wireless Bluetooth Headphones come with a Two-Year Warranty from the date of purchase.
For technical support, warranty claims, or any questions regarding your product, please contact UGREEN customer service through their official website or the platform where you purchased the product. Please retain your proof of purchase for warranty service.