T&G TG392

Contents

TG392 Outdoor Bicycle Bluetooth Speaker Instruction Manual

Your guide to setting up, operating, and maintaining your T&G TG392 Portable Wireless Soundbox.

1. Introduction

The T&G TG392 is a versatile and durable portable Bluetooth speaker designed for outdoor enthusiasts. Its lightweight and portable design, coupled with a dedicated bike-mounted bracket, makes it ideal for cycling, scooting, motorcycling, and other outdoor activities. Featuring Bluetooth 5.3 connectivity, IPX5 waterproofing, and multiple playback options, the TG392 ensures your music accompanies you wherever you go.

TG392 Portable Bluetooth Speaker in various colors, highlighting Bluetooth 5.3, IPX5 waterproof, 500mAh battery, and hands-free calling.
Figure 1: TG392 Portable Bluetooth Speaker overview with key features.

2. Setup

2.1. Package Contents

  • 1 x TG392 Bluetooth Speaker
  • 1 x USB Charging Cable (Type-C)
  • 1 x AUX Cable
  • 1 x User Manual
  • 1 x Bicycle Mounting Bracket (may be pre-attached or separate)

2.2. Charging the Speaker

Before first use, fully charge the speaker. Connect the provided Type-C USB cable to the speaker's charging port and the other end to a 5V/500mA USB power source (e.g., a computer USB port or a USB wall adapter). The charging indicator light will show the charging status. A full charge takes approximately 3 hours.

Close-up of the TG392 speaker's side ports, including USB-C charging port, USB-A port, TF card slot, and AUX input.
Figure 2: Speaker ports for charging and media input.

2.3. Mounting on a Bicycle

The TG392 speaker comes with a clip and a fixed bracket for easy installation on bicycle handlebars or frames. The bracket is designed for quick attachment and removal.

  1. Attach the bracket to your bicycle handlebar or frame using the screw mechanism. Ensure it is securely tightened.
  2. Slide the speaker onto the bracket until it clicks into place. The clip on the back of the speaker is designed to fit snugly into the bracket.
  3. Verify the speaker is firmly attached and will not dislodge during movement.
Image showing the TG392 speaker with its clip and separate mounting bracket, demonstrating how it attaches securely to a bicycle handlebar.
Figure 3: Speaker with clip and mounting bracket for secure attachment.
Purple TG392 speaker securely mounted on a bicycle handlebar.
Figure 4: TG392 speaker mounted on a bicycle handlebar.

3. Operating Instructions

3.1. Power On/Off

  • Power On: Press and hold the power button (O) for a few seconds until you hear an audible prompt and the indicator light turns on.
  • Power Off: Press and hold the power button (O) again for a few seconds until you hear an audible prompt and the indicator light turns off.

3.2. Bluetooth Pairing

  1. Ensure the speaker is powered on and in Bluetooth pairing mode (usually indicated by a flashing blue LED).
  2. On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
  3. Select "TG392" from the list of devices.
  4. Once paired, the speaker will emit an audible confirmation, and the LED indicator will stop flashing and remain solid blue.
  5. The speaker will automatically shut down if no Bluetooth connection is established for a period of time.

3.3. Playback Modes

The TG392 supports six major playback modes:

Close-up of the speaker's ports labeled with playback modes: FM radio, Bluetooth, TF card, AUX, U disk, TWS.
Figure 5: Six major playback modes supported by the TG392 speaker.
  • Bluetooth Mode: Connect wirelessly to your device as described in section 3.2.
  • FM Radio Mode: Press the 'M' button to switch to FM radio mode. Use the '+' and '-' buttons to scan for stations.
  • TF Card Mode: Insert a TF (MicroSD) card with MP3 audio files into the TF card slot. The speaker will automatically switch to TF card playback.
  • AUX Mode: Connect an external audio device using the provided 3.5mm AUX cable to the AUX input port. The speaker will automatically switch to AUX mode.
  • USB Flash Drive (U Disk) Mode: Insert a USB flash drive with MP3 audio files into the USB-A port. The speaker will automatically switch to USB playback.
  • TWS Interconnection Mode: To achieve double surround sound, you can connect two TG392 speakers wirelessly. Power on both speakers. On one speaker, press and hold the 'M' button until you hear a pairing prompt. The two speakers will connect automatically. Once connected, pair your device to one of the speakers via Bluetooth.

3.4. Volume Control & Track Navigation

  • Volume Up: Short press the '+' button.
  • Volume Down: Short press the '-' button.
  • Next Track/Station: Long press the '+' button.
  • Previous Track/Station: Long press the '-' button.

3.5. Hands-Free Calling

The TG392 features a built-in microphone for hands-free calling when connected via Bluetooth to your smartphone.

  • Answer Call: Short press the 'M' button when an incoming call is received.
  • End Call: Short press the 'M' button during a call.
  • Reject Call: Long press the 'M' button when an incoming call is received.

4. Maintenance

4.1. Waterproof Care (IPX5)

The TG392 speaker is IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction. This makes it suitable for use in damp conditions or light rain. However, it is NOT designed to be submerged in water. Avoid prolonged exposure to heavy rain or submersion to prevent damage.

TG392 speaker being splashed with water, illustrating its IPX5 waterproof rating.
Figure 6: IPX5 waterproof rating allows for use in damp conditions.

4.2. Cleaning

To clean the speaker, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure all ports are closed and the speaker is completely dry before use or charging.

4.3. Battery Care

  • Avoid fully discharging the battery frequently.
  • Charge the speaker regularly, even if not in use, to maintain battery health.
  • Store the speaker in a cool, dry place when not in use for extended periods.

5. Troubleshooting

ProblemPossible CauseSolution
Speaker does not power onLow battery; Power button not pressed long enoughCharge the speaker; Press and hold the power button for 3-5 seconds.
Cannot connect via BluetoothSpeaker not in pairing mode; Device Bluetooth off; Speaker already connected to another device; Out of rangeEnsure speaker is in pairing mode; Enable Bluetooth on your device; Disconnect from other devices; Move device closer to speaker (<10m).
No soundVolume too low; Incorrect playback mode; Corrupt media fileIncrease volume on speaker and device; Switch to correct playback mode (Bluetooth, FM, TF, AUX, USB); Try a different media file.
FM radio reception is poorWeak signal; Environmental interferenceMove to an open area; Try rescanning for stations.
TWS pairing failsSpeakers too far apart; One speaker already paired to a deviceEnsure speakers are close to each other; Disconnect any Bluetooth devices from both speakers before TWS pairing.

6. Specifications

FeatureDetail
ModelTG-392
BrandT&G
Bluetooth Version5.3
Wireless RangeUp to 10 meters
Speaker Power5W (4Ω/5W * 1)
Frequency Response120Hz-20KHz
Signal-to-Noise Ratio≥90dB
Battery Capacity500mAh Polymer Battery
Built-in Voltage3.7V
Charging Voltage/Current5V/500mA (Type-C USB)
Usage Time (Normal Playback)Approximately 3-5 hours
Charging TimeApproximately 3 hours
Waterproof RatingIPX5
Playback ModesBluetooth, FM Radio, TF Card, AUX, USB Flash Drive (U disk), TWS Interconnection
Built-in MicrophoneYes (for hands-free calls)
Audio CrossoverFull-Range
Number of Loudspeaker Enclosures1
MaterialPlastic (Cabinet)
Dimensions (L x W x H)100mm x 50mm x 72mm (approx.)
Net WeightApproximately 214g
CertificationCE
Image displaying detailed product parameters for the TG-392 Outdoor Cycling Bluetooth Speaker.
Figure 7: Product parameters for the TG-392 speaker.

7. User Tips

  • Versatile Mounting: While designed for bicycles, the speaker's clip and compact size allow it to be easily attached to backpacks, waistbands, scooters, motorcycles, and electric bikes for music on the go.
  • Multiple Music Sources: Don't limit yourself to Bluetooth! The speaker supports music playback from TF cards and USB flash drives (U disk), offering flexibility for your audio library.
  • Outdoor Durability: The IPX5 waterproof rating means you can confidently use the speaker in light rain or dusty environments. Just remember not to submerge it.
  • Enhanced Sound: For a more immersive audio experience, consider purchasing a second TG392 speaker and utilizing the TWS (True Wireless Stereo) interconnection feature for double surround sound.
Image showing the TG392 speaker being used in various outdoor scenarios: clipped to a backpack, clipped to a waistband, and clamped onto a bicycle.
Figure 8: The TG392 speaker's versatility for various outdoor activities.
Video 1: Product demonstration showcasing the TG392 speaker's features and use cases.

8. Warranty and Support

For warranty information and customer support, please refer to the seller's policies or contact the retailer where you purchased the product. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.