FUTABA T16IZ Super Remote Control Set V4.0 User Manual

1. Introduction

This manual provides essential information for the setup, operation, and maintenance of your FUTABA T16IZ Super remote control set, V4.0 version, which includes the R7308SB receiver. The T16IZ Super is a high-performance radio control system designed for various model types, including airplanes, helicopters, gliders, and multicopters. Please read this manual thoroughly before using your remote control system to ensure safe and optimal performance.

Figure 1: Front view of the FUTABA T16IZ Super Remote Control

2. Setup

2.1. Throttle Mode Selection

The T16IZ Super allows for user-configurable throttle modes without opening the back cover. You can choose between three main throttle configurations:

• Left Hand Throttle (American Hand): Throttle control is on the left stick.
• Right Hand Throttle (Japanese Hand): Throttle control is on the right stick.
• Double Return Center Throttle: Both sticks return to center, suitable for specific applications.

Note: Please ensure the correct throttle mode is selected to match your preference and model type. Contact customer service if you require assistance with throttle selection.

Figure 2: Throttle Mode Configurations (MODE1-MODE4) and Stick Adjustments

2.2. Stick Mode Configuration and Calibration

The stick mode can be changed via the system menu. It is crucial to calibrate the sticks after changing the stick mode.

• Navigate to System menu → H/W setting on the color screen.
• Select the desired stick mode.
• Perform calibration immediately after changing the stick mode.

WARNING: The changed stick mode will be reflected from the newly created model data. Change stick mode before entering model data. Before the flight, make sure that the operation of the stick matches the model operation.

Figure 3: Stick Mode Selection and Calibration Prompt

2.3. Stick Spring Tension Adjustment

You can adjust the spring strength of the J1, J2, J3, and J4 sticks to your preference using a screwdriver. This adjustment is performed from the back side of the remote control.

• Locate the adjusting screws for each stick on the back of the transmitter.
• Turn the screw clockwise to increase tension (Spring → Hard).
• Turn the screw counter-clockwise to decrease tension (Spring → Soft).

CAUTION: Loosening the screw too much can interfere with the internal stick operation.

Figure 4: Stick Spring Tension Adjustment Points

3. Operating Instructions

The FUTABA T16IZ Super is equipped with advanced features for precise control and telemetry. Here are some key operational aspects:

3.1. General Operation

• Power On/Off: Use the designated power button. The color screen will display the main menu upon startup.
• Navigation: The 4.3-inch color LCD touchscreen allows for intuitive navigation through menus and settings.
• Model Selection: Select your desired model type (Airplane, Helicopter, Glider, Multicopter) from the main screen.

Figure 5: Model Type Selection on the T16IZ Super Screen

3.2. Key Features

• Channels: Supports 18 channels (16 proportional channels + 2 switching channels).
• Receiver: Comes standard with the R7308SB receiver.
• Model Memory: Stores up to 30 sets of model data.
• S.Bus Support: Full support for S.Bus servo and servo programming functions.
• Telemetry: Supports Hobbywing data transmission module and SBS-01ML sensor for real-time data feedback.
• Programming: Supports CGY760/CGY755/GYA553 programming parameter adjustment.
• Display: Wide viewing angle 4.3-inch color LCD touchscreen.
• Storage: Micro SD card slot for data storage and transfer.
• Firmware: The transmitter supports firmware upgrades to ensure you have the latest features and improvements.
• Language: Features a Chinese menu interface.
• Connectivity: USB-C port for emulator connection and charging the internal lithium battery.
• Audio: Equipped with external speakers.

4. Maintenance

• Cleaning: Use a soft, dry cloth to clean the transmitter. Avoid using solvents or abrasive cleaners.
• Storage: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: The T16IZ Super uses a USB-C rechargeable lithium battery (2000mAh). Charge the battery regularly, even when not in use, to maintain its health. Avoid fully discharging the battery for extended periods.
• Firmware Updates: Periodically check the manufacturer's website for available firmware updates to ensure optimal performance and access to new features.
• Physical Inspection: Regularly inspect sticks, switches, and antennas for any signs of damage or wear.

5. Troubleshooting

5.1. Common Issues and Solutions

• Transmitter not powering on:
  • Check if the internal lithium battery is charged. Connect the USB-C charger and allow sufficient charging time.
  • Ensure the power button is pressed correctly.
• No response from model:
  • Verify that the receiver (R7308SB) is properly bound to the transmitter.
  • Check all connections between the receiver and servos/ESCs.
  • Ensure the model's battery is charged and connected.
  • Confirm that the correct model memory is selected on the transmitter.
• Sticks feel loose or too stiff:
  • Adjust the stick spring tension as described in Section 2.3.
• Incorrect stick response after changing mode:
  • Perform stick calibration after any stick mode changes (refer to Section 2.2).

If you encounter persistent issues not covered here, please refer to the detailed troubleshooting section in the full manufacturer's manual or contact customer support.

6. Specifications

7. User Tips

• Throttle Mode Confirmation: Always double-check your throttle mode (e.g., Mode 2 for left-hand throttle) before each flight session, especially if you share the transmitter or have recently adjusted settings.
• Post-Adjustment Calibration: After making any changes to stick modes or physical stick tension, perform the necessary calibration steps to ensure accurate control response.
• Battery Management: Keep the internal 2000mAh lithium battery charged. A low battery can lead to unexpected behavior or loss of control. Utilize the convenient USB-C charging port.
• Firmware Updates: Regularly visit the official Futaba website for firmware updates. These updates often include performance enhancements, bug fixes, and new features.
• Model Data Backup: Use the Micro SD card slot to regularly back up your model settings and data. This protects your configurations in case of unforeseen issues.

8. Warranty and Support

The FUTABA T16IZ Super remote control set is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and conditions, please refer to the documentation provided with your product or visit the official Futaba website.

For technical support, service, or inquiries regarding your product, please contact the authorized Futaba distributor or service center in your region. Ensure you have your product model number and purchase information available when seeking support.