Joyroom JR-OK6

Contents

Joyroom JR-OK6 Car Phone Holder Instruction Manual

Model: JR-OK6 | Brand: Joyroom

Introduction

Thank you for choosing the Joyroom JR-OK6 Car Phone Holder. This universal car mount is designed to provide a secure and convenient way to hold your smartphone while driving, allowing for hands-free navigation and communication. It features strong suction for dashboard or windshield installation, one-handed operation, and 360-degree rotation for optimal viewing angles. Please read this manual carefully before installation and use to ensure proper functionality and safety.

Key Features

  • Secure Locking Mechanism: Press both sides to open and lock with one button, ensuring your phone is stable and secure.
  • One-Handed Operation: Simple installation and easy one-handed phone placement and retrieval.
  • 360° Adjustable Viewing: Fully adjustable to any angle, supporting both horizontal and vertical viewing modes.
  • Universal Compatibility: Compatible with mobile phones ranging from 4.7 to 6.8 inches, fitting various thick cases.
  • Strong Suction Cup: Provides super power suction to stick tightly on smooth surfaces like dashboards and windshields.

Installation Guide

Follow these steps for fast and easy installation of your Joyroom JR-OK6 Car Phone Holder:

  1. Wipe the Surface Dry: Ensure the dashboard or windshield surface where you intend to mount the holder is clean and dry.
  2. Tear Off the Bottom Glue: Remove the protective film from the adhesive on the bottom of the suction cup.
  3. Place the Bracket: Position the bracket firmly on the desired clean, smooth surface.
  4. Press the Lock to Exhaust Air: Press down the suction cup lock lever to create a vacuum and securely attach the holder, exhausting all air.
  5. Choose a Suitable Angle: Adjust the holder to your preferred viewing angle.
Step-by-step installation guide for the Joyroom car phone holder
Visual guide for installing the car phone holder.

Installation Demonstration Video

Watch this video for a detailed demonstration of the installation process and product features.

Using Your Car Phone Holder

Mounting and Retrieving Your Phone

The Joyroom JR-OK6 is designed for easy one-handed operation:

  • To mount your phone, simply place it into the holder. The side arms will automatically close and lock the phone securely in place.
  • To retrieve your phone, press the release bar located on the side or bottom of the holder. The arms will open, allowing you to easily remove your device.
One-handed operation of the car phone holder with easy one-touch trigger and release bar
Effortless one-handed phone mounting and retrieval.

Adjusting Viewing Angle

The holder features a 360-degree rotation capability, allowing you to adjust your phone to the perfect horizontal or vertical viewing position for navigation or calls.

Phone holder showing 360-degree rotation and horizontal/vertical viewing options
Adjust your phone to any angle for optimal viewing.

Care and Cleaning

To maintain the strong suction and longevity of your car phone holder, follow these cleaning instructions:

  • If the suction cup loses its grip due to dust or dirt, simply wash the adhesive surface with water.
  • Allow the suction cup to air dry completely before re-installing it. Do not use cloths or paper towels to dry, as this may leave fibers that reduce suction.
  • Avoid exposing the holder to extreme temperatures for prolonged periods, as this may affect the adhesive properties.
Image showing the washable and reusable suction cup feature
The suction cup is washable and reusable to restore its adhesive power.

Common Issues and Solutions

If you encounter problems with your car phone holder, consider the following:

  • Holder Not Sticking Firmly:
    • Ensure the bracket is placed flat on the instrument panel or windshield.
    • Verify that the base suction cup is pressed firmly to exhaust all air before locking the lever.
    • Check if the surface is clean and dry. If there is dust or dirt on the adhesive, wash the suction cup with water and let it air dry completely before re-installation.
  • Phone Not Locking Securely:
    • Make sure the phone is properly centered in the holder before the arms close.
    • Ensure the one-touch trigger mechanism is functioning correctly and the arms are fully closing around your phone.

If you have completed the above steps and are still experiencing issues, please contact customer support for further assistance.

Product Specifications

AttributeDetail
Brand NameJoyroom
ModelJR-OK6
TypeCar Phone Holder
Installation TypeWindshield / Dashboard installation (Suction Cup)
Special FeaturesAdjustable, Hands-free, One-handed operation
Rotation360 Degrees Rotation
Applicable Models4.7-6.8 Inches All Mobile Phones
ColorBlack
OriginMainland China

Product Dimensions

Diagram showing dimensions for Sucker Model and Dashboard Model, including rotation and folding capabilities
Detailed dimensions for both Sucker and Dashboard models.

User Tips

  • Wide Phone Compatibility: This holder is designed to accommodate a broad range of smartphones, including larger models like the iPhone 15 Pro Max, thanks to its adjustable arms.
  • Versatile Vehicle Use: The robust design and dual installation options (dashboard or windshield) make this holder suitable for use in various car models, ensuring a stable mount regardless of your vehicle type.
  • Optimal Placement: Experiment with both dashboard and windshield placements to find the position that offers the best visibility and least obstruction for your driving style.

Warranty and Support

Joyroom products are manufactured to high-quality standards. For any questions, technical support, or warranty claims, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for warranty service.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.