LIXADA Wireless Bike Computer User Manual

1. Product Overview

The LIXADA Wireless Bike Computer is a multi-functional device designed to enhance your cycling experience by providing real-time data. Its compact, lightweight, and wireless design ensures easy installation and use. Featuring a 2.8-inch large LCD screen with backlight, data is clearly visible at any time and from any angle. Equipped with a high-quality smart chip, it offers stable performance and retains data even when powered off. The device is IPX6 waterproof, making it suitable for use on rainy days.

Key Features:

• Wireless Design: Easy to install and use without tangled wires.
• Large LCD Screen: 2.8-inch display with adjustable backlight (Blue/Green/White options) for clear visibility in various lighting conditions.
• Multi-functional: Tracks current speed, max speed, average speed, distance, total distance, cycling time, temperature, calories burned, fat burned, ETA, and stopwatch.
• IPX6 Waterproof: Designed to withstand rain and splashes, suitable for all-weather cycling.
• Smart Chip: Ensures stable performance and data retention.
• Button Battery: Provides long life and low power consumption.

2. Safety Warnings

⚠ WARNING: Read all safety instructions carefully before use. Failure to follow these instructions may result in serious personal injury or device failure. Keep these instructions in a safe place for future reference. Proper use of the bike computer is essential for your safety while riding.

• This product is intended for cycling use only. Do not use it for non-intended purposes, as it may not provide adequate protection or function properly.
• Check all bike computer components before each use for damage, wear, or looseness. If any damage is found, stop using the device immediately to avoid safety hazards.
• Ensure the bike computer and its accessories are properly installed and adjusted before riding.
• Keep the bike computer away from children under 8 years old unless supervised by an adult. Small components may cause accidental ingestion.
• Do not modify any bike computer components. Unauthorized modifications may damage the device, reduce its safety performance, and void compliance.
• Avoid exposing the bike computer to extreme conditions: Do not leave it in direct sunlight for a long time (may cause material aging), do not submerge it in water beyond its IPX6 waterproof rating, and do not expose it to high temperatures (above 60°C) or low temperatures (below -10°C) which may damage the material.
• When cleaning the bike computer, follow the maintenance instructions. Do not use harsh chemicals, abrasives, or corrosive cleaners, as they may damage the device's material and affect its performance.

3. Setup and Installation

Package Contents:

• 1 x Bike Computer
• 1 x Extension Bracket
• 1 x Nut
• 1 x Base
• 1 x Transmitter (Sensor)
• 1 x Magnetic Screw (Magnet)
• 4 x Zip Ties
• 1 x Rubber Pad
• 2 x Manuals

Installation Steps:

1. Install the Magnet: Attach the magnetic screw to a spoke on your bicycle wheel.
2. Install the Sensor (Transmitter): Secure the wireless transmitter to the bicycle fork using zip ties and the rubber pad. Ensure the distance between the magnet and the sensor is much closer than 3mm for accurate readings.
3. Install the Bracket:
   • Place the bracket on the handlebar.
   • Bend the end of the bracket.
   • Insert the nut in the direction of the arrow and tighten it clockwise.
4. Fix the Computer: Slide the bike computer into the base of the bracket in the direction of the arrow until it clicks securely. To remove, press down the buckle and push the computer forward.

Important Note on Wireless Installation: The distance from the transmitter (sensor) to the bicycle computer should not exceed 60cm. The distance between the magnet and the sensor should be as close as possible, ideally within 3mm, for accurate speed readings.

4. Operation

Pre-Ride Check:

• Before starting your ride, recheck that the bike computer is securely fixed to its bracket.
• Ensure the sensor and magnet are correctly aligned and within the optimal distance (max 3mm).
• Verify the display is active and showing data.

Using the Bike Computer:

The bike computer features "SET" and "MODE" buttons for navigation and configuration. Refer to the included manual for specific button functions and detailed setup of wheel circumference, time, and units.

• Power On/Off: The device typically powers on automatically when motion is detected or by pressing a button. It may enter sleep mode after a period of inactivity.
• Switching Display Modes: Use the "MODE" button to cycle through different data displays such as current speed, average speed, max speed, distance, total distance, cycling time, temperature, calories, fat burned, ETA, and stopwatch.
• Backlight Control: The display features an optional backlight (Blue/Green/White). Use the dedicated light button (often integrated with "SET" or "MODE" or a separate icon) to activate or change the backlight color/mode for night riding or low-light conditions.
• Data Reset: Consult the manual for instructions on how to reset trip data (e.g., current distance, average speed) for a new ride, while retaining total odometer readings.

5. Maintenance and Care

• Regular Cleaning: Wipe the computer's shell and screen with a damp cloth and mild soap. Air dry completely. Do not use harsh chemicals, abrasives, or corrosive cleaners.
• Battery Maintenance: The bike computer uses a button battery. If the device is not used for a long time (more than 1 month), remove the battery to prevent leakage and damage. Store batteries in a dry, cool place. Replace batteries with the same type and specification recommended by the manufacturer.
• Storage: Store the bike computer in a dry, cool, and well-ventilated place, away from direct sunlight, moisture, and high temperatures.
• Regular Inspection: Inspect the device and its accessories (bracket, sensor, magnet) at least once a month for wear, damage, or loose parts. Replace any damaged components immediately.

6. Troubleshooting

• No Speed Reading or Inaccurate Data:
  • Check the alignment and distance between the magnet and the sensor. They should be within 3mm.
  • Ensure the sensor is securely mounted on the fork and the magnet on the spoke.
  • Verify the distance between the sensor and the bike computer is less than 60cm.
  • Check the battery level of the bike computer and sensor (if applicable). Replace if low.
• Display Not Working:
  • Check the battery. Replace if necessary.
  • Ensure the computer is properly seated in its bracket.
  • If the screen is blank, try pressing the "MODE" or "SET" button to wake it from sleep mode.
• Water Damage: Although IPX6 waterproof, avoid submerging the device. If water ingress occurs due to submersion beyond its rating, allow it to dry completely in a well-ventilated area. Do not attempt to open the device.
• Data Loss: The device is designed to retain data when powered off. If data is lost unexpectedly, check the battery and ensure proper operation.

7. Specifications

8. Compliance and Standards

This product is marked with the CE symbol, indicating that it complies with the essential requirements of the relevant European Union directives and can be legally sold within the European Economic Area (EEA).

It adheres to the general product safety directive (2001/95/EC – GPSD), ensuring the overall safety of its components during use.

9. User Tips

• Speed Measurement: This bike computer uses a wireless sensor and magnet for speed measurement, not GPS. Ensure the sensor and magnet are correctly installed and aligned for accurate readings.
• Initial Setup: Take your time during the initial setup, especially when adjusting the wheel circumference, to ensure all calculations (distance, speed) are precise.
• Battery Life: To maximize battery life, remove the button battery if you plan not to use the computer for an extended period.

10. Contact Information

For product questions, complaints, or after-sales service (such as component replacement, size adjustment, or maintenance advice), please contact the manufacturer or EU authorized representative:

Manufacturer:

Shanghai Laifeng Hardware Products Co., Ltd
Address: Building 4, 1st-2nd Floors, No. 1628 Lizheng Road, Shuyuan Town, Pudong New Area, Shanghai
Email: a143sumaito2785@163.com
Tel: 86-13476659185

EU Authorized Representative:

SOLID AUTHORITY LIMITED
Address: 51 Bracken Road, Sandyford, Dublin 18, D18 CV48, Ireland
Email: phoebe8706@gmail.com

For a comprehensive user manual in PDF format, please refer to the official document: User Manual (PDF).