Cubot CUBOT X90

Contents

CUBOT X90 Smartphone User Manual

Model: CUBOT X90

1. Introduction

Welcome to the CUBOT X90 user manual. This guide provides essential information to help you set up, operate, and maintain your new smartphone. The CUBOT X90 is a feature-rich device running Android 14, boasting a 6.67-inch AMOLED Curved 120Hz Display, a powerful Helio G99 Octa-Core processor, 32GB RAM (16GB + 16GB Extended), 256GB ROM, and a versatile 100MP camera system with NFC capabilities.

CUBOT X90 smartphone with key features highlighted
CUBOT X90 smartphone showcasing its main features.

2. Initial Setup

2.1. SIM Card and Storage Installation

The CUBOT X90 supports Dual Nano SIM cards. Ensure your device is powered off before inserting or removing SIM cards.

  1. Locate the SIM card tray on the side of your device.
  2. Use the provided SIM ejector tool to open the tray.
  3. Carefully place your Nano SIM card(s) into the designated slots.
  4. If applicable, insert a microSD card into its slot for expanded storage.
  5. Gently push the tray back into the device until it clicks into place.

2.2. Powering On/Off

  • To Power On: Press and hold the Power button (usually on the right side) until the CUBOT logo appears.
  • To Power Off: Press and hold the Power button, then select "Power off" from the options on the screen.
  • To Restart: Press and hold the Power button, then select "Restart" from the options.

2.3. Charging the Device

The CUBOT X90 is equipped with a 5100mAh battery and supports 33W fast charging.

  1. Connect the USB Type-C cable to the charging port at the bottom of the phone.
  2. Connect the other end of the cable to the power adapter.
  3. Plug the power adapter into a wall outlet.
  4. The charging indicator will appear on the screen.
CUBOT X90 battery and charging features
Battery capacity, fast charging, and other features.

3. Operating Your CUBOT X90

3.1. Display Features

Experience immersive visuals on the 6.67-inch FHD+ AMOLED Curved Display with a 120Hz refresh rate and 1080*2400 resolution, offering 2.4K vivid color and 1500 nits brightness.

CUBOT X90 display specifications
Details of the 6.67-inch FHD+ AMOLED Curved Screen.

3.2. Camera System

The CUBOT X90 features a versatile quad-camera setup:

  • Rear Camera: 100MP PDAF Main Lens (with 10X Digital Zoom, HDR Algorithm, 1/1.8 Large Sensor Area, 6P Ultra Clear Lens, F/1.9 Ultra Large Aperture), 16MP Ultra-wide Lens, 5MP Macro Lens, and a 0.3MP Sensor with 1A LED flashlight.
  • Front Camera: 32MP Selfie Camera.

To utilize the full 100MP resolution, check your camera app settings for a dedicated '100MP' or 'High Resolution' mode. Some users have noted that the default setting might be lower (e.g., 25MP), requiring manual adjustment for maximum detail.

CUBOT X90 camera specifications
Overview of the CUBOT X90's camera system.

3.3. Performance and Storage

Powered by the MTK Helio G99 6nm Octa-Core processor, the X90 offers smooth performance. It comes with 32GB RAM (16GB base + 16GB extended virtual RAM) and 256GB of internal storage, expandable via microSD card.

CUBOT X90 memory and storage details
Memory and storage capabilities of the CUBOT X90.

3.4. Connectivity

The CUBOT X90 supports a wide range of global frequency bands for 4G, 3G, and 2G networks. It also includes NFC for contactless payments and data transfer, Bluetooth 5.2, Wi-Fi, and built-in GPS.

  • 4G FDD-LTE: B1/2/3/4/5/7/8/12/13/17/18/19/20/25/26/28A+B/66
  • 4G TDD: 38/39/40/41
  • 3G WCDMA: B1/2/4/5/6/8/19
  • 2G GSM: 850/900/1800/1900MHz

For optimal network performance, verify compatibility with your local carrier's frequency bands.

Video demonstrating the CUBOT X90's sleek design, global connectivity, and fast performance.

3.5. Security Features

The CUBOT X90 offers advanced security options including an in-display fingerprint sensor and Face Recognition for effortless unlocking and data protection.

CUBOT X90 security features: in-display fingerprint and face recognition
Effortless unlock with in-display fingerprint sensor and Face ID.

3.6. Audio

The device features 2-microphone noise reduction technology for crystal-clear communication.

4. Maintenance

4.1. Battery Care

  • Avoid exposing the phone to extreme temperatures.
  • Use only the original or certified chargers and cables to prevent damage and ensure optimal charging speed.
  • For long-term storage, charge the battery to around 50% and store in a cool, dry place.

4.2. Cleaning Your Device

  • Use a soft, lint-free cloth to clean the screen and body of the phone.
  • Avoid using harsh chemicals or abrasive materials.
  • Do not spray cleaners directly onto the screen.

5. Troubleshooting

5.1. Common Issues

  • Device not turning on: Ensure the battery is charged. Connect to a charger and try again after a few minutes.
  • Network connectivity issues: Check if your SIM card is properly inserted. Verify that your mobile data is enabled and that you are within network coverage. Confirm your carrier's frequency bands are supported by the device.
  • Camera resolution not 100MP: Access the camera app settings and look for options to change the photo resolution or enable a specific '100MP' mode.
  • Slow performance: Close unnecessary background apps. Clear cache regularly. Consider a factory reset if performance issues persist after other troubleshooting steps (back up your data first).

5.2. Factory Reset

A factory reset will erase all data from your phone and restore it to its original factory settings. Back up all important data before proceeding.

  1. Go to Settings > System > Reset options.
  2. Select "Erase all data (factory reset)".
  3. Confirm your decision and follow the on-screen prompts.

6. Specifications

FeatureSpecification
Brand NameCubot
ModelCubot X90
Operation SystemAndroid 14
CPU ModelMTK Helio G99 (6nm Octa-Core, 2*A76 2.2GHz+6*A55 2.0GHz)
RAM32GB (16GB + 16GB Extended)
ROM256GB
Display Size6.67'' AMOLED Curved Screen
Display Resolution2400x1080
Screen Refresh Rate120 Hz
Rear Camera Pixel100MP PDAF Main + 16MP Ultra-wide + 5MP Macro + 0.3MP Sensor
Front Camera Pixel32MP
Battery Capacity(mAh)5100 mAh
Charging Power33W Fast Charging
Charging Interface TypeType-C
SIM Card Quantity2 SIM Card (Dual Nano SIM)
NFCYes
Biometrics TechnologyIn-Screen Fingerprint Recognition, Face Recognition
Built-in GPSYes
Wi-FiYes
Bluetooth VersionYES (Bluetooth 5.2)
3.5mm Headphone PortNo
Wireless ChargingNo
Dimensions (H x W x T)162.2mm x 74mm x 9.35mm
Weight207g
Language SupportArabic, Polish, German, Russian, French, Korean, Norwegian, Portuguese, Japanese, Turkish, Spanish, Italian, English
CUBOT X90 physical dimensions and weight
Physical dimensions and weight of the CUBOT X90.

7. User Tips

  • Camera Settings: If you are not getting the advertised 100MP resolution, check your camera app settings for a specific '100MP' or 'High Resolution' mode. The default setting might be lower.
  • Smooth Performance: The combination of the Helio G99 processor and 16GB of RAM (expandable to 32GB) provides a very fluid user experience, even with demanding applications.
  • Network Compatibility: While the phone is globally unlocked, always verify that the supported frequency bands (listed in the specifications) match those of your local network provider for full compatibility. The device supports up to 4.5G networks.
  • Charger Type: Depending on your region, the phone may come with a specific charger plug (e.g., EU plug). If an adapter is needed for your country, it is often included.
  • NFC Functionality: The CUBOT X90 includes NFC, allowing for convenient contactless payments and quick pairing with other NFC-enabled devices.

8. Warranty and Support

CUBOT products typically come with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please contact the official CUBOT customer service or the retailer from whom you purchased the device. Keep your proof of purchase for warranty validation.

Warranty and service information
General warranty and service information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.