Wishcolor Common/Tuning Version Dual ES9038Q2M DAC Audio Decoder Board Kit

Contents

Wishcolor Dual ES9038Q2M DAC Audio Decoder Board Kit

User Manual for Common and Tuning Versions

1. Introduction

Thank you for purchasing this product. This manual serves as a universal guide applicable to consumer electronics, including portable audio devices, amplifiers, decoders, motherboards, walkie-talkies, radios, and instrumentation series sold by our store. For detailed technical specifications, specific manuals, or software for a particular model, please contact us via the provided methods.

This product is a Dual ES9038Q2M DAC Audio Decoder Board Kit, available in Common and Tuning versions, designed for HiFi audio applications with Coaxial, Optical, USB, and Bluetooth IIS inputs, supporting PCM up to 384KHz and DSD up to DSD512.

2. Safety Warnings

2.1 Electrical Safety

  • Use only the power adapter provided with the product or a compliant power supply.
  • Do not use in humid environments unless the product specifically states a waterproof rating.
  • If the power cord is damaged, discontinue use immediately and contact us for a replacement.
  • Always disconnect the power before cleaning.

2.2 Usage Environment

  • Operating temperature range: -10°C to 40°C (subject to model specifications).
  • Avoid direct sunlight, high temperatures, and dusty environments.
  • Ensure good ventilation and do not block heat dissipation holes.

2.3 Operational Safety

  • Do not disassemble or modify the product yourself, as there are no user-repairable parts inside.
  • Prevent liquid from entering the product interior.
  • If the product emits smoke, unusual odors, or abnormal noise, immediately disconnect the power and contact after-sales service.

3. Setup

3.1 Unpacking Inspection

After opening the package, please check that all items are complete. If you find any items missing or damaged, please contact us immediately.

3.2 First Use

  • Please ensure the product is fully charged before use (if applicable).
  • Check if the power supply voltage is consistent with the product specifications (AC100-240V, 50/60Hz, applicable worldwide).

4. Operating Instructions

4.1 Basic Operations

  • Power on/off: Press and hold the power button for 3 seconds to turn on/off.
  • Function selection: Short press the mode button to switch functions.
  • Display screen: The TFT screen shows the current value/status.

4.2 Digital Volume Control and Display

The device is equipped with digital volume control, supporting volume adjustment. The TFT screen provides a long lifespan without screen burning and can be controlled using an Apple infrared remote control.

4.3 Supported Sampling Rates for Each Input Interface

Input InterfacePCM SupportDSD Support
Coaxial44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz, 352.8KHz, 384KHzDOP64, DOP128
Optical (OPT)44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHzDOP64
USB44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz, 352.8KHz, 384KHzDSD64, DSD128, DSD256, DSD512
Bluetooth IIS44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz, 352.8KHz, 384KHzDSD64, DSD128, DSD256, DSD512

5. Specifications

5.1 General Technical Specifications

Parameter CategoryGeneral ScopeRemark
Input PowerAC100-240V, 50/60Hz or DC5V/9V/12VPlease refer to the product label.
Operating Temperature-10℃ ~ 40℃
Storage Temperature-20℃ ~ 60℃
Protection LevelIP20 (for indoor use)Except for waterproof models.
Authentication InformationCE, RoHSCompliant with EU directives.

5.2 Version Differences

The DAC board is available in two versions: Common and Tuning. The primary differences lie in the selection of internal components for audio performance:

  • Common Version: Utilizes 3 x Nichicon electrolysis capacitors, Siemens film capacitor, Evox film capacitor, and ELNA non-polar coupled output capacitor.
  • Tuning Version: Features 2 x ELNA electrolysis capacitors for analog power supply, Panasonic electrolysis capacitor for digital power supply, WIMA film capacitor, blue silvered mica capacitor, ERO green film capacitor, and Nichicon green non-polar coupling capacitor.

5.3 Analog Output Performance

ParameterRCA Single-Ended OutputXLR Balanced Output
Output Level2.7V5V
Noise Level-112dB-117dB
Dynamic Range112dB117dB
THD (Total Harmonic Distortion)0.0004%0.0004%
Inter-modulation Distortion0.0014%0.0008%
Stereo Separation Degree-108dB116dB

5.4 Key Features

  • Adopting dual 9038Q2M for left and right channel decoding for higher separation and low distortion.
  • High-speed digital isolation IC in the USB section to reduce noise.
  • USB part compatible with XMOS or Amanero modules.
  • Digital main power supply uses LT1764A fast transient response, low noise LDO stabilized IC.
  • 9038Q2M DAC uses low noise IC for power supply; analog power supply uses domestic JCET7815 7915.
  • Dual power supply, digital and analog separate rectification and filtering.
  • DAC simulation part uses opto acoustic direct insertion resistors and capacitors.
  • Board supports Bluetooth interface IIS input.

5.5 Package Contents

  • 1 x Decoder Board Kit

6. Product Overview

Common Version

Common Version DAC board, top view
Common Version DAC board, top view, showing component layout.
Common Version DAC board, angled view
Angled view of the Common Version DAC board.
Common Version DAC board with USB module
Common Version DAC board with an attached USB module.
Common Version DAC board display module
The display module for the Common Version DAC board, showing control buttons.

Tuning Version

Tuning Version DAC board, top view
Tuning Version DAC board, top view, highlighting different component choices.
Tuning Version DAC board, angled view
Angled view of the Tuning Version DAC board.
Tuning Version DAC board, rear view
Rear view of the Tuning Version DAC board.

7. Maintenance and Care

  • Cleaning: Wipe the outer casing with a soft, dry cloth. Do not use chemical solvents.
  • Storage: When not in use for an extended period, clean and store in a cool, dry place.
  • Battery (if applicable): If not used for an extended period, please remove the battery to prevent leakage.

8. Troubleshooting Common Problems

ProblemPossible ReasonsSolution
Unable to power onPower not connected/battery depletedCheck the power connection, charge, and try again.
No display/Display errorPoor connection/Incorrect settingsRestart the device and check the connection.
Inaccurate measurement values (instrument-related)Range error/calibration requiredConfirm the measurement range and contact calibration services.
Other faults–Contact customer service for technical support.

9. User Tips

No specific user tips are available from provided reviews or Q&A content at this time.

10. Warranty and Support

Warranty Policy

12/24 months from the date of purchase (subject to store announcement).

Technical Support

For detailed technical documentation, calibration certificates, or hard copies of the manual, please contact us via AliExpress internal message or email: WISHCOLOR@126.COM. Response time is typically within 24 hours (working days).

Full User Manual (PDF)

A comprehensive user manual in PDF format is available for download: View User Manual (PDF).

11. EU Compliance Information

11.1 CE Declaration of Conformity

This product complies with the essential requirements of the following EU directives:

  • Low Voltage Directive (LVD) 2014/35/EU
  • Electromagnetic Compatibility Directive (EMC) 2014/30/EU
  • RoHS Directive 2011/65/EU

11.2 Waste Disposal (WEEE)

The wheeled bin symbol marked with an X on the product indicates that, according to EU Directive 2012/19/EU, this product must not be disposed of as unsorted municipal waste and must be collected and recycled separately.

12. Disclaimer

This instruction manual is a general version; the actual product functions and parameters shall prevail. The manufacturer reserves the right to change product designs and specifications without prior notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.