JIKONG JK-B2A8S20P

Contents

JK BMS JK-B2A8S20P Smart Active Balance Battery Management System User Manual

Model: JK-B2A8S20P | Brand: JIKONG

1. Introduction

This user manual provides detailed instructions for the installation, operation, and maintenance of the JIKONG JK-B2A8S20P Smart Active Balance Battery Management System (BMS). This advanced BMS is designed to protect and optimize the performance of various battery types, including LiFePO4, Li-ion, and LTO, in configurations from 4S to 8S. Featuring active balancing, Bluetooth connectivity, and comprehensive protection functions, the JK-B2A8S20P is suitable for a wide range of applications from camping and e-bikes to energy storage systems.

JIKONG JK-B2A8S20P Smart Active Balance BMS unit

Figure 1: JIKONG JK-B2A8S20P Smart Active Balance BMS unit.

Video 1: Product rotation showcasing the JK-B2A8S20P BMS.

2. Product Features

  • Active Balance: Real-time active energy transfer equalization using a supercapacitor medium, ensuring battery consistency and extending battery life.
  • High Balance Current: Achieves 2A continuous balanced current.
  • Wide Voltage Range: Single cell voltage range of 1V to 5V with an equalization accuracy of ±5mV.
  • Broad Battery Compatibility: Suitable for LiFePO4, Ternary Lithium, Lithium Titanate (LTO) battery types.
  • Bluetooth Connectivity: Mobile APP support for real-time battery status monitoring on Android and iOS devices.
  • Scalability: Supports balanced cascading for battery packs exceeding 24 series.
  • Comprehensive Protection: Includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection, Dropout Protection, and Over Temperature Protection.
  • Communication Interfaces: Equipped with RS485 by default; CANBUS and LCD interfaces are available (some may require customization).
  • Charging Current: 200A.
  • Usage Scenarios: Power BMS, Energy Storage BMS, 3C Digital BMS.
  • Inverter Compatibility: Compatible with various inverter brands including Growatt, Deye, SRNE, Pylontech, Victron Energy, Voltronic Power, SMA, Must, INVT, Goodwe, and Sofar.
  • Applications: Ideal for E-bikes, Electric Tricycles, Low Speed Quads, Forklifts, Cleaning Cars, Tourist Cars, Industrial Drones, Scooters, RV Energy Storage, Energy Storage Cabinets, Power Banks, and Power Tools.
Key features of JK-B2A8S20P BMS including BT/RS485, 4S-8S, 2A Balance, 200A Charge/Discharge, Li-ion/Lifepo4/LTO

Figure 2: Key features of the JK-B2A8S20P BMS.

Diagram showing 2A active balance current

Figure 3: Illustration of 2A active balance current.

Logos of communicable inverter brands: Growatt, Deye, SRNE, Pylontech, Victron Energy, Voltronic Power, SMA, Must, INVT, Goodwe, Sofar

Figure 4: Communicable Inverter Brands compatible with JK BMS.

Applications of JK Smart BMS including E-bike, Electric Tricycle, Low Speed Quad, Forklift, Cleaning Car, Tourist Car, Industrial Drone, Scooter, RV Energy Storage, Energy Storage Cabinet, Power Bank, Power Tools

Figure 5: Diverse applications of JK Smart BMS.

3. Package Contents

Upon opening the package, please verify that all the following items are included:

  • 1 x JK BMS unit (with built-in Bluetooth)
  • 1 x Temperature sensor (40cm)
  • 1 x Balance Wires (75cm)
  • 1 x Active Switch (15cm)
  • 4 x Cables
  • 4 x Screws
  • 1 x Heating cable (Only included with BMS models featuring the Heat Function)

Note: The RS485 and LCD accessories for B1A8S20P/B2A8S20P BMS models are not universally compatible due to differing supported voltage ranges. The Power Board version is consistent. Please choose to buy them carefully. The heating cable's green 5PIN connector links to the heating pad, while the red and black cables connect to a smart charger. The smart charger, linked via the BMS, monitors battery temperature and automatically manages charging.

4. Specifications

The following table details the technical specifications of the JK BMS series, including the JK-B2A8S20P model:

Detailed product specifications table for JK BMS series

Figure 6: JK BMS Product Specifications Table.

Key Specifications for JK-B2A8S20P
AttributeValue
Brand NameJIKONG
TypeLiFePO4 Battery BMS
Handware or SmartSMART BMS
Balance FunctionActive Balanced BMS
Charging Current200A
Charge and Discharge PortCommon Port BMS
Battery Series4S 5S 6S 7S 8S
Usage ScenarioPower BMS, Energy Storage BMS, 3C Digital BMS
FunctionOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
BluetoothYES
CertificationCE, RoHS
Dimensions153x136x17.6mm (approximate, refer to diagram)
Dimensions diagram for JK-B2A8S20P BMS

Figure 7: Dimensions of the JK-B2A8S20P BMS.

5. Setup and Installation

5.1 Wiring Instructions

Careful wiring is crucial for the safe and correct operation of your BMS. Please follow these steps precisely. This example uses a single series connection, but the method can be extended to other series BMS configurations.

JK BMS 5-step wiring method diagram

Figure 8: JK BMS 5-step wiring method.

  1. Connect the B- line: Find the P- and B- terminals on the protection board. Connect the B- line (total negative) to the corresponding black row of wires. Ensure the cable is correctly inserted into the protection board, paying attention to the front and back orientation.
  2. Identify Total Negative: Find the total negative terminal of your battery pack. For example, in a 18650 battery pack, different battery configurations may have different positive and negative positions. Use a multimeter to confirm the total negative voltage.
  3. Connect Balance Wires: Connect the first wire to the negative terminal of the battery, the second wire to the positive terminal of the first series of batteries, the third wire to the positive terminal of the second series, and so on, until all series are connected. Important: The wires must be connected in order. Do not skip any series.
  4. Measure Voltage: Measure the voltage between each two series lines (e.g., 3V-4.2V for ternary batteries, 2.5-3.6V for LiFePO4). If the measurement is outside this range, double-check the line connection. Incorrect wiring can damage the protection board.
  5. Final Connection: After confirming all wires are correctly connected, connect the B- to the total negative terminal of the battery (wire length within 15cm is recommended). Then, insert the connected wires, measure the protection board B- and the total positive voltage. This total positive voltage should equal the total positive voltage of the P- and the total positive voltage of the charging and discharging interface negative terminal.

For a general overview of the wiring connections, refer to the diagram below:

Detailed wiring diagram for 4S-8S battery setup with JK BMS

Figure 9: Detailed Wiring Diagram for JK BMS.

Example of Connection Mode diagrams for various S-counts (24S, 20S, 17S, 16S, 14S, 13S, 8S, 7S)

Figure 10: Example Connection Modes for various battery series configurations.

5.2 Parallel Operation

If you intend to use multiple BMS units in parallel, it is essential to add a Fast Class T Fuse to each battery pack for safety. Alternatively, a discharge diode (high-power diode selected according to the load) can be used.

Diagram showing parallel operation of LiFePO4 batteries with individual BMS units and fuses

Figure 11: Parallel Operation of LiFePO4 Batteries with Individual BMS.

5.3 BMS Interfaces

The JK BMS features several interfaces for various functions:

  • Temperature Sensor (①): Detects battery temperature.
  • RS485 Interface (②): Configured by default on all JK BMS models for communication.
  • LCD Interface (③): Configured by default on most JK BMS models (except JK-BD4A17S4P) for display.
  • Heat Function Interface (④): For connecting heating elements (requires customization).
  • CANBUS Interface (⑤): Available for customized integration.
Diagram showing various interfaces on the JK BMS: Temperature sensor, RS485, LCD, Heat Function, and CANBUS

Figure 12: JK BMS Interfaces.

Close-up view of JK BMS interfaces including CAN/RS485, GPS, LCD, and Heat Function

Figure 13: Close-up of JK BMS Interfaces.

5.4 Mobile APP Setup

The JIKONG BMS can be monitored and configured via a mobile application. Ensure Bluetooth is enabled on your device.

The APP allows real-time viewing of battery status and parameter adjustments.

Screenshots of the JIKONG BMS mobile application interface showing battery data and settings

Figure 14: Mobile APP Interface for JIKONG BMS.

6. Operation

Once installed and connected, the JK BMS operates automatically to manage your battery pack. You can monitor its performance and adjust settings via the mobile application.

6.1 Active Balancing

The active balancing feature is automatically engaged when the cell voltage difference exceeds a predefined trigger value. This occurs whether the battery is charging, discharging, or at rest, ensuring optimal cell consistency.

6.2 Heating Function (if applicable)

For BMS models with the heating function, if the battery temperature falls below the low-temperature charge protection threshold (configurable in the APP), charging will be paused, and the heating function will activate to warm the battery. The heating power is dependent on the battery voltage and the resistance of the heating film.

7. Maintenance

To ensure the longevity and optimal performance of your JK BMS and battery pack:

  • Regularly check all wiring connections for tightness and corrosion.
  • Monitor battery cell voltages and overall pack health via the mobile APP.
  • Ensure the BMS unit is kept in a clean, dry environment, free from excessive dust or moisture.
  • Avoid exposing the BMS to extreme temperatures outside its operating range.
  • Periodically check for firmware updates for the BMS via the mobile application to ensure you have the latest features and improvements.

8. Troubleshooting

This section addresses common issues and their solutions.

8.1 No Power On

  • Ensure the "B+" line is correctly connected to the battery's total positive pole.
  • Activate the BMS by charging: The charger voltage must be at least 4V higher than the battery pack voltage for activation.
  • Verify that the charger has voltage output.

8.2 Voltage Inaccuracy

  • Measure the actual total voltage of the battery pack using a multimeter.
  • Enter this actual total voltage into the "Voltage Calibration" setting on the APP's parameter page.

8.3 Current Inaccuracy

  • Ensure that both 7AWG wires for BMS B- and P- are connected in parallel. Failure to do so can lead to current errors.
  • Measure the actual current of the battery pack with a clamp meter.
  • Input this actual current into the "Current Calibration" setting on the APP's parameter page. Higher actual current during calibration generally leads to higher accuracy.

8.4 Capacity Inaccuracy

  • Step 1: Set the battery capacity in the APP. You can set it slightly higher than the actual capacity (e.g., 120AH or 150AH for a 100AH battery).
  • Step 2: Discharge the battery pack using an electrical instrument until the BMS triggers a single cell undervoltage protection.
  • Step 3: Charge the battery pack without interruption until the BMS triggers a single cell overvoltage protection.

After completing these steps, the capacity will automatically update in the APP, reflecting the actual battery capacity and ensuring accurate State of Charge (SOC) readings.

8.5 Mismatch in Designed vs. Actual String Count

  • Verify that the "number of single unit" parameter in the APP settings is correctly configured.
  • If there is no voltage in the middle of 2S or more strings, check if the collection line is disconnected.

9. User Tips

  • Charger Selection: Always use a charger specifically designed for your battery chemistry (e.g., LiFePO4 charger for LiFePO4 batteries). Using a lead-acid battery charger can damage the BMS. The correct charger voltage for LiFePO4 is 3.65V per cell, and for ternary batteries, it's 4.25V per cell, multiplied by the number of series.
  • BMS Current Rating: The BMS current rating should be chosen based on the current limit of your controller, which in turn depends on your motor's power. Always select a BMS with a continuous current rating greater than your controller's current limit, allowing for a safety margin.
  • Bluetooth Connection: If experiencing issues with Bluetooth connectivity, double-check the password number for the Bluetooth connection.

10. Frequently Asked Questions (FAQ)

Q: What is the difference between a common port and a separate port BMS?
A: A common port BMS (like the JK-B2A8S20P) uses the same terminal (P-) for both charging and discharging, meaning the charge and discharge currents are the same. A separate port BMS has distinct terminals for charging (C-) and discharging (P-), allowing for different current ratings for each function.
Q: Is there a direct relationship between battery capacity and BMS current?
A: No, the battery capacity and BMS current do not have a direct relationship. The BMS current should be selected based on the continuous current draw required by your application, primarily determined by your controller's current limit, not the battery's capacity.
Q: How do I choose the right charger for my battery pack with this BMS?
A: You must use a charger specifically designed for your battery chemistry. For LiFePO4 batteries, use a LiFePO4 charger. For ternary batteries, use a ternary charger. Using an incorrect charger (e.g., lead-acid charger) can cause overvoltage and damage the BMS. The charger voltage should match the total voltage of your battery pack (e.g., 3.65V * number of series for LiFePO4).
Q: How much current should I choose for the BMS?
A: The BMS current should be chosen based on the current limit of your controller. For example, if your motor is 1000W at 64V, the current is 15.6A. Your controller's current limit must be greater than this, and the BMS's continuous current rating must be greater than the controller's current limit. Always allow for a safety margin.

11. Safety Information

The JK BMS is equipped with multiple safety features to protect your battery and system:

Diagram illustrating six security protections: Overcharge, Short Circuit, Over Discharge, Overcurrent, All-in (dropout), Over Temperature

Figure 15: Six Security Protection Features.

  • Overcharge Protection: Prevents over-charging, which can affect battery life.
  • Short Circuit Protection: Automatic protection engages when a short circuit is detected.
  • Over Discharge Protection: Prevents the battery from being completely drained.
  • Overcurrent Protection: Prevents the current from exceeding the battery's safe range.
  • Dropout Protection (All-in Protection): Prevents issues from cable drops or poor contact.
  • Over Temperature Protection: Prevents the battery from overheating.

Always ensure proper ventilation around the battery pack and BMS. Do not attempt to modify the BMS or its wiring unless you are a qualified professional. Disconnect the battery pack before performing any maintenance or wiring changes.

12. Warranty and Support

The JIKONG JK-B2A8S20P BMS is certified with CE and RoHS standards, ensuring compliance with European safety, health, and environmental protection requirements. For technical support or warranty inquiries, please contact your vendor or refer to the official JIKONG support channels.

Certifications including CE and RoHS for JIKONG products

Figure 16: Product Certifications.

© 2024 JIKONG. All rights reserved.

This manual is subject to change without notice.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.