Introduction
This manual provides instructions for the GTV-IR1 V3 Replacement Remote Control, designed to be compatible with various Formuler and Dreamlink set-top boxes. This high-quality remote offers easy and full access to all necessary functions without requiring complex programming. Simply install the batteries, and it's ready for use with compatible devices.
Setup
1. Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery cover.
- Insert two (2) AAA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment. Batteries are not included.
- Close the battery cover securely.
2. Programming TV Control Keys (Learning Mode)
The GTV-IR1 V3 remote control features a learning function to program specific TV control keys from your original TV remote. Follow these steps:
- Press and hold the [TV] button on the GTV-IR1 V3 remote until its LED indicator turns solid. The remote control unit (RCU) is now in Learning Mode.
- Press the specific key on the GTV-IR1 V3 RCU that you wish to program (e.g., Volume Up). The LED will flash, indicating it's ready to accept programming for that key.
- Aim your original TV remote control directly towards the front of the GTV-IR1 V3 RCU (ensure the distance is less than 3cm). Press the corresponding desired key on your original TV remote. If programmed correctly, the LED on the GTV-IR1 V3 RCU will turn off.
- Repeat steps 2 and 3 for any other keys you wish to program.
- To exit Learning Mode, press any other button on the GTV-IR1 V3 RCU that was not part of the programming sequence. The LED will turn off.
Operating Instructions
Once batteries are installed, the remote is ready for immediate use with compatible Formuler and Dreamlink boxes. Point the remote directly at your device and press the desired buttons.
- Power (STB): Turns the set-top box on or off.
- TV Control: Activates the programmed TV functions (e.g., TV Power, TV Volume).
- OK / Navigation Arrows: Used for menu selection and navigation.
- Source: Changes the input source on your TV (if programmed).
- Vol+/-: Adjusts the volume.
- Ch Pg: Changes channels or pages.
- Info: Displays program information.
- Guide: Accesses the electronic program guide.
- Favorite: Accesses favorite channels/content.
- Groups: Manages channel groups.
- Numeric Keypad (0-9): Direct channel entry.
- Playback Controls (Play/Pause, Stop, Fast Forward, Rewind): Controls media playback.
- Colored Buttons: Functionality varies by application or device.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or aerosols.
- Battery Replacement: Replace batteries when the remote's performance degrades or if the LED indicator does not light up. Always replace both batteries at the same time with new ones.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures. If not used for extended periods, remove the batteries to prevent leakage.
Troubleshooting
- Remote not responding: Check if the batteries are inserted correctly and are not depleted. Replace with fresh AAA batteries if necessary.
- Limited range or intermittent response: Ensure there are no obstructions between the remote and the device. Make sure the remote's infrared emitter is clean and not covered.
- Specific buttons not working: If you programmed TV control keys, re-attempt the programming steps carefully. For other buttons, ensure the remote is pointed directly at the device.
- Device not compatible: While designed for Formuler and Dreamlink boxes, specific model compatibility may vary. Refer to the 'User Tips' section for advice.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Beyution |
| Model Number | GTV-IR1 V3 (FORMULER-2-V3-OSVV) |
| Wireless Communication | IR (Infrared) |
| Use | Audio / Video Players (Formuler & Dreamlink Boxes) |
| Frequency | 433 MHz |
| Support APP | No |
| Package | Yes (1X Remote Control) |
| Power Supply | 2 * AAA Alkaline Battery (Not included) |
| Dimensions (L x W x H) | 20 cm x 5 cm x 3 cm (approx.) |
| Weight | 0.085 kg (approx.) |
| Origin | Mainland China |
| Certification | None |
User Tips
- Verify Compatibility: While this remote is designed for Formuler and Dreamlink boxes, it is always recommended to confirm compatibility with your specific model (e.g., Formuler Z10) if you are unsure. Contact the seller if you need assistance verifying compatibility.
- Line of Sight: For optimal performance, ensure a clear line of sight between the remote control and your device's infrared receiver.
Warranty and Support
For any issues, questions, or support regarding your GTV-IR1 V3 Replacement Remote Control, please contact the seller directly. They can provide assistance with troubleshooting, compatibility checks, and any other product-related inquiries.