EARU MG2T-4E2, MG2T-4E4, H3Y-4, H3Y-2

Contents

EARU Digital Time Relay Instruction Manual

Models: MG2T-4E2, MG2T-4E4, H3Y-2, H3Y-4

1. Important Safety Information

WARNING

This product does not feature an explosion-proof structure and must not be used in flammable environments, such as those containing flammable gases, liquids, or explosives.

SAFETY INFORMATION

  1. Please use this product in accordance with the instructions in this manual.
  2. Do not disassemble this product by yourself.
  3. Pay attention to the rated voltage for use.

2. Product Description

The EARU Digital Time Relay is a switching component that utilizes electronic technology to achieve automatic circuit control. Its core function is to control the on/off switching of high currents using low currents, serving purposes such as isolation, amplification, and automatic switching. This versatile device offers multiple working modes and precise digital time setting.

EARU Digital Time Relay with base and digital display, showing Power-On Delay, Delayed Release, Cyclic Delay (Start of Falling Edge), Cyclic Delay (Rising Edge Onset) modes.
Figure 1: EARU Digital Time Relay with its base and display, highlighting various operating modes.

3. Specifications

General Specifications
FeatureDescription
Brand NameEARU
TheoryTime Relay
Power SourceAC
Working VoltageAC/DC 24-240V
Time Delay Adjustable Range0.1S - 990H
UseGeneral Purpose
CertificationCE
EU LVD VoltageHigh voltage: Above 50Vac or 75Vdc
High-concerned chemicalNone

Model-Specific Details

H3Y-2 Model (8-pin)
FeatureDescription
Product ModelH3Y-2
Number of Product Feet8 feet
Contact Form2NO2NC
Base ModelPYF-08A
Dimensions (Relay)22mm (W) x 57mm (H) x 28mm (D)
Dimensions (with Base)72mm (W) x 89mm (H) x 28mm (D)
Dimensions and 8-pin wiring diagram for H3Y-2 model.
Figure 2: H3Y-2 Model (8-pin) Dimensions and Wiring Diagram.
H3Y-4 Model (14-pin)
FeatureDescription
Product ModelH3Y-4
Number of Product Feet14 feet
Contact Form4NO4NC
Base ModelPYF-14A
Dimensions (Relay)29mm (W) x 57mm (H) x 28mm (D)
Dimensions (with Base)72mm (W) x 89mm (H) x 28mm (D)
Dimensions and 14-pin wiring diagram for H3Y-4 model.
Figure 3: H3Y-4 Model (14-pin) Dimensions and Wiring Diagram.

Package Information

  • Length: 10 cm
  • Width: 10 cm
  • Height: 10 cm
  • Weight: 0.1 kg

4. Setup and Installation

The EARU Digital Time Relay is designed for easy installation, typically mounting onto a standard DIN rail. Ensure all power is disconnected before attempting any wiring.

4.1 Mounting

The relay unit is designed to be inserted into its corresponding base (PYF-08A for H3Y-2, PYF-14A for H3Y-4). The base can then be mounted onto a standard DIN rail for secure installation within an electrical panel or enclosure.

EARU Digital Time Relay mounted on a DIN rail.
Figure 4: Relay mounted on a DIN rail.

4.2 Wiring

Refer to the specific wiring diagrams for your model (H3Y-2 or H3Y-4) to ensure correct connections. The diagrams illustrate the pin assignments for power input (SOURCE) and contact forms (NO/NC).

H3Y-2 (8-pin) Wiring Diagram:

8-pin wiring diagram for H3Y-2 model, showing pin numbers 1, 4, 5, 8, 9, 12, 13, 14 and source connection.
Figure 5: H3Y-2 (8-pin) Wiring Diagram. Pins 13 and 14 are for power input (SOURCE). Other pins are for contact forms (2NO2NC).

H3Y-4 (14-pin) Wiring Diagram:

14-pin wiring diagram for H3Y-4 model, showing pin numbers 1-14 and source connection.
Figure 6: H3Y-4 (14-pin) Wiring Diagram. Pins 13 and 14 are for power input (SOURCE). Other pins are for contact forms (4NO4NC).

5. Operating Instructions

The digital time relay features a clear display and two control buttons (T1 and T2) for setting and mode selection.

Detailed operating instructions for the EARU Digital Time Relay, including basic setting, cycle setting, expanded description, indicator light meanings, working modes, and time specification table.
Figure 7: Detailed Operating Instructions and Time Specification Table.

5.1 Basic Setting

  • Enter Setting Mode: Long press the T1 key for more than 3 seconds.
  • Change Time Specification (Mode 1): While in setting mode, click the T1 key to cycle through time units (S, M, H, 0.1S, etc.).
  • Set Value (Mode 2): Long press the T1 key again for more than 3 seconds to set the value. Use the T1 and T2 keys to adjust the numerical value.
  • Main Interface Adjustment: From the main interface, click both T1 and T2 keys simultaneously to change the value.

5.2 Cycle Setting (for Cyclic Delay Modes)

  • The T1 time period setting mode remains unchanged.
  • Enter T2 Setting Mode: Long press the T2 key for more than 3 seconds.
  • Change Time Specification: Click the T2 key to cycle through time units.
  • Set Value: Long press the T2 key again for more than 3 seconds to set the value. Use the T1 and T2 keys to adjust the numerical value.

5.3 Working Modes

To change the working mode, long press both T1 and T2 keys for more than 3 seconds. Then, press any key (T1 or T2) to cycle through the available modes:

  • Power-On Delay (Default): The relay activates after a set delay once power is applied.
  • Delayed Release: The relay deactivates after a set delay once the trigger condition is removed.
  • Cyclic Delay (Start of Falling Edge): The relay cycles on and off, starting with the off state, for set T1 and T2 durations.
  • Cyclic Delay (Rising Edge Onset): The relay cycles on and off, starting with the on state, for set T1 and T2 durations.

5.4 Time Specification Table

The adjustable range for time settings depends on the selected unit:

Digital DisplayUnitAdjustable Range
SSecondsS*(1-99)
MMinutesM*(1-99)
HHoursH*(1-99)
0.1STenths of Seconds0.1S*(1-99)
0.1MTenths of Minutes0.1M*(1-99)
0.1HTenths of Hours0.1H*(1-99)
10STens of Seconds10S*(1-99)
10MTens of Minutes10M*(1-99)
10HTens of Hours10H*(1-99)

5.5 Indicator Light Meanings

  • SET always on: The device is in operation.
  • SET blinking: Setting is in progress.
  • T1 always on: Running T1 time (only in cycle mode).
  • T1 blinking: Setting T1 parameters (only in cycle mode).
  • T2 always on: Running T2 time (only in cycle mode).
  • T2 blinking: T2 parameters are being set (only in cycle mode).

5.6 Expanded Description

  • If there is no operation for more than 10 seconds, the current settings will be saved by default.
  • In the running state (or T1 time period), the numerical value is always on, and the decimal point flashes.
  • In the output state (or T2 time period), both the numerical value and the decimal point flash.

5.7 Operation Demonstration Video

Watch this video for a visual demonstration of setting the timer and observing the relay's operation with indicator lights.

Video 1: Demonstration of setting the EARU Digital Time Relay and its operational modes.

6. User Tips

  • Voltage Compatibility: The relay supports a wide AC/DC voltage range of 24-240V. Ensure your power supply falls within this range for proper and safe operation. Incorrect voltage can damage the unit.
  • Setting Confirmation: Remember that settings are automatically saved after 10 seconds of inactivity in setting mode.
  • Visual Cues: Pay attention to the indicator lights (SET, T1, T2) and the flashing behavior of the digital display to understand the current state (running, setting, output active).

7. Maintenance

The EARU Digital Time Relay is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:

  • Cleaning: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
  • Environmental Conditions: Ensure the operating environment is within the specified temperature and humidity ranges to prevent damage. Avoid exposure to excessive moisture or direct sunlight.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or damage.

8. Troubleshooting

If you encounter issues with your EARU Digital Time Relay, consider the following common troubleshooting steps:

  • No Power/Display Off:
    • Check the power supply voltage to ensure it is within the AC/DC 24-240V range.
    • Verify that the power input wires (pins 13 and 14) are correctly connected and secure.
    • Check for any tripped circuit breakers or blown fuses in the power circuit.
  • Incorrect Timing/Operation:
    • Review the operating instructions to ensure the correct working mode has been selected and configured.
    • Double-check the T1 and T2 time settings and their corresponding units (S, M, H, etc.).
    • Ensure that the input trigger signals (if applicable) are functioning correctly.
  • Relay Not Switching:
    • Verify that the load connected to the relay contacts is within the device's rated capacity.
    • Check the wiring to the load and ensure the contact pins are correctly used (NO/NC).
    • Confirm that the relay is receiving power and the timer is counting down as expected.
  • Device Damage: If the device was connected to an incorrect voltage (e.g., a user reported damage when connecting to 110V despite the wide range, possibly due to incorrect wiring or a faulty unit), or if there are visible signs of damage, discontinue use and consider replacement.

If the problem persists after these steps, please contact customer support.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's official website or contact their customer service directly. Keep your purchase receipt or order details handy for any claims.

A user manual in PDF format is available for download. Please refer to the product page for the download link: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.