DOOYA DD7006A

Contents

P-Box DD7006A WiFi Bridge User Manual

Model: DD7006A

Your guide to smart control for motorized blinds, shutters, and curtains.

1. Introduction

The DOOYA DD7006A P-Box Connector is a smart WiFi Bridge designed to integrate your motorized shutters, blinds, and curtains (equipped with DOOYA Receiver & Remote) into your smart home ecosystem. It enables convenient control via a dedicated smartphone application and facilitates interaction with other IoT products like SmartThings, Amazon Alexa, Google Assistant, and IFTTT.

2. Safety Information

  • Ensure the device is placed in an open area, clear of concrete walls or corners, to optimize Wi-Fi signal and RF communication.
  • Keep the P-Box away from other electric appliances (e.g., refrigerators, microwaves) to prevent interference.
  • This device is intended for indoor use only.
Diagram showing P-Box near a concrete wall with an 'X' indicating improper placement.
Avoid concrete walls.
Diagram showing P-Box near electric appliances like a refrigerator and microwave with an 'X' indicating improper placement.
Keep away from electric appliances.

3. Product Overview

The P-Box DD7006A features several ports and an indicator LED for easy setup and monitoring.

Front view of the P-Box DD7006A showing USB Type-C port, Ethernet port, Program button, and Indicator LED.
P-Box DD7006A Front View
  • USB Type-C Port: For power input.
  • Ethernet Port: For wired network connection.
  • Program Button: Used for pairing and resetting the device.
  • Indicator LED: Provides visual feedback on the device's status.
Bottom view of the P-Box DD7006A showing model number, RF frequency, power input, Wi-Fi details, and QR codes.
P-Box DD7006A Bottom View with Specifications

4. Specifications

FeatureDetail
ModelDD7006A Wifi Bridge
Internet Connectivity2.4G Wi-Fi (802.11 b/g/n), Ethernet
Power Input5V 1000mA (USB Type-C)
Radio Frequency (RF)433.05-434.79MHz
Dimensions (L*W*H)75mm * 75mm * 33mm
PoE SupportOnly for DD7006 and DD7006 POE PD versions.
CompatibilityDOOYA motors with Receiver & Remote, SmartThings, Amazon Alexa, Google Assistant, IFTTT.

5. Setup and Installation

5.1. Download the App

To control your P-Box, you need to download the dedicated Connector App. Scan the QR codes below with your smartphone to find the app on the App Store or Google Play.

QR code for App Store download.
App Store
QR code for Google Play download.
Google Play

5.2. Physical Placement

Place the P-Box in a central location within your home, ensuring it is not obstructed by concrete walls or near other electronic devices that could cause interference. This will ensure optimal Wi-Fi and RF signal strength.

5.3. Connecting to Your Router

Connect the P-Box to your home router using either Wi-Fi or an Ethernet cable. For Wi-Fi setup, follow the instructions within the Connector App. For Ethernet, simply connect an Ethernet cable from your router to the P-Box's Ethernet port.

5.4. Establishing Connection with IoT Applications

Scan the QR code below to learn more about linking your Connector Bridge with your home router, setting up the Connector App, and integrating with other IoT applications like SmartThings, Amazon Alexa, Google Assistant, and IFTTT.

QR code for linking the Connector Bridge with home router and setting up the app for IoT applications.
Link-up Guide QR Code

6. Operating Instructions

6.1. Pairing with Motors

To pair the P-Box with your DOOYA motorized blinds, shutters, or curtains:

  1. Press and hold the Program button on the P-Box for approximately 2 seconds.
  2. Release the button when the LED blinks purple. The device is now in pairing mode.
  3. Follow the specific pairing instructions for your DOOYA motor and remote to complete the connection via the Connector App.

6.2. App Control and Smart Home Integration

Once paired, use the Connector App to control your motorized devices. You can also integrate the P-Box with compatible smart home platforms:

  • SmartThings
  • Amazon Alexa
  • Google Assistant
  • IFTTT

Refer to the respective app's instructions for integrating the P-Box with these platforms.

7. Status Indicators

The LED indicator on the P-Box provides important information about its current status:

ColorMeaningDuration
Constant BlueWorkingConstant
Slow Flashing RedNetwork is disconnectedContinuously till status change
Quick Flashing RedNetwork is connectedContinuously till status change
Slow Flashing YellowBridge meet5 times
Slow Flashing PurplePairing underwayContinuously till status change
Slow Flashing GreenUpgrade in progressContinuously till status change

8. Resetting the Device

If you need to reset the P-Box to its factory settings, follow these steps:

  1. Press and hold the Program button for approximately 10 seconds.
  2. Release the button when the LED blinks red. The device will reset and all previous settings will be cleared.

9. Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to open or repair the device yourself, as this will void the warranty.
  • Ensure the power supply is stable and within the specified voltage (5V 1000mA).

10. Troubleshooting

  • Device not powering on: Check the USB Type-C power connection and ensure the power adapter is working.
  • Network disconnected (Slow Flashing Red LED): Verify your Wi-Fi network is active or check the Ethernet cable connection to your router. Try restarting your router.
  • Unable to pair with motors: Ensure the P-Box is in pairing mode (Slow Flashing Purple LED). Check that your DOOYA motor is also in pairing mode according to its specific instructions. Ensure the P-Box is within range of the motor.
  • App not connecting to P-Box: Ensure your smartphone is connected to the same Wi-Fi network as the P-Box. Restart the app and the P-Box.
  • Interference with other devices: Relocate the P-Box away from other electronic appliances or large metal objects.

11. User Tips

  • Compatibility Check: Before purchasing or attempting to integrate, verify that your existing motors are DOOYA brand with compatible receivers and remotes. While some hardware may appear similar (e.g., Brel HUB-03), direct compatibility is not guaranteed without explicit confirmation from the manufacturer.
  • Smart Home System Integration: For advanced smart home systems like Control4, confirm compatibility with DOOYA or the P-Box directly with your system integrator or DOOYA support.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.