BAOFENG UV-6

Contents

BAOFENG UV-6 Two Way Radio User Manual

Model: UV-6

1. Introduction

Thank you for choosing the BAOFENG UV-6 Two Way Radio. This portable dual-band transceiver is designed for reliable communication in various outdoor and professional settings. This manual provides essential information for the safe and efficient operation of your radio. Please read it thoroughly before use.

BAOFENG UV-6 Two Way Radio front view

Figure 1: BAOFENG UV-6 Two Way Radio

2. Package Contents

Ensure all items are present in your package:

  • 1 x BAOFENG UV-6 Dual Band Walkie Talkie
  • 1 x AC Charger (round or flat plug)
  • 1 x Li-ion Battery (7.4V 2000mAH)
  • 1 x Antenna
  • 1 x Hang Strap
  • 1 x Belt Clip and Screw
  • 1 x User's Manual
  • 1 x PTT Headset
BAOFENG UV-6 Two Way Radio and all included accessories

Figure 2: Complete package contents

3. Product Overview

The BAOFENG UV-6 is a compact and robust two-way radio designed for ease of use. It features a durable plastic casing and intuitive controls.

3.1 Physical Features

  • Antenna: Connects to the radio for transmitting and receiving signals.
  • Channel Selector Knob: Used to select one of the 16 available channels.
  • Power/Volume Knob: Turns the radio on/off and adjusts the volume.
  • PTT (Push-to-Talk) Buttons: Dual PTT buttons for transmitting on different frequencies or channels.
  • Microphone (MIC): For voice input.
  • Speaker (SP): For audio output.
  • Battery Compartment: Houses the removable Li-ion battery.
  • Accessory Jack: For connecting the PTT headset or programming cable.
BAOFENG UV-6 Two Way Radio held comfortably in hand

Figure 3: Ergonomic design of the UV-6

Close-up of the top of the BAOFENG UV-6 radio, showing antenna connector and control knobs

Figure 4: Top view with antenna connector and control knobs

4. Specifications

FeatureSpecification
General
Brand NameBAOFENG
Model NumberUV-6
UseOutdoor
Frequency RangeVHF: 144-148MHz, 156-163MHz; UHF: 430-440MHz, 446MHz, 462-467MHz (Broadly 136-174MHz & 400-480MHz)
Channel Capacity16 (memory for 128 groups frequency)
Channel Spacing2.5/5/6.25/10/12.5/25KHz
Operated Voltage7.4V
Battery Capacity2000mAh Li-ion
Battery LifeApprox. 8 hours
Frequency Stability2.5ppm (-20 ºC ~ +60 ºC)
Operated Temperature-30 ºC ~ +60 ºC
Antenna Impedance50 Ω
Dimensions (HxWxD)118x55x34mm
Weight (with battery and antenna)252g
Waterproof / Water-ResistantIP45
Is DisplayNo
Maximum Range5km-10km
MaterialPlastic
CertificationCE, RoHS
Transmitter
Transmit Power8W (selectable 5W/2W)
ModulationF3E
Spurious Emission≥-65dB
FM Noise (N/W)45dB ≤42dB
Audio DistortionLess than 5%
Adjacent Channel Power≤-65dB ≤-60dB
Max Frequency Deviation5KHz (N) / 2.5KHz (W)
Frequency Error500Hz
Modulation Distortion0.1KHz (300-3000KHz)
Transmitting CurrentAbout 1.5A

5. Initial Setup

5.1 Battery Installation

  1. Align the battery pack (Figure 5) with the grooves on the back of the radio.
  2. Slide the battery pack upwards until it clicks into place.
  3. To remove, press the battery release latch and slide the battery downwards.
Back of the BAOFENG UV-6 radio with battery removed, showing battery compartment and label

Figure 5: Battery compartment and Li-ion battery

5.2 Antenna Attachment

  1. Screw the antenna clockwise into the connector on the top of the radio until it is firmly seated.
  2. Do not overtighten.

5.3 Charging the Battery

Before initial use, fully charge the battery. Use only the supplied charger.

  1. Insert the AC adapter into a power outlet.
  2. Place the radio with the battery installed into the charging cradle.
  3. The charging indicator light will show the charging status (typically red for charging, green for fully charged).
BAOFENG UV-6 radio in charging cradle with AC adapter

Figure 6: Charging the radio

6. Operating Instructions

6.1 Power On/Off and Volume Control

Rotate the Power/Volume knob clockwise to turn the radio on and increase the volume. Rotate counter-clockwise to decrease volume and turn off the radio.

6.2 Channel Selection

Rotate the Channel Selector knob to choose one of the 16 pre-programmed channels. The radio provides a voice guide for the selected channel number and its working frequency.

6.3 Transmitting and Receiving (PTT)

The UV-6 features a unique double PTT design. To transmit, press and hold the appropriate PTT button. Speak clearly into the microphone. Release the PTT button to receive. The radio will automatically switch to transmit when a signal is detected on the selected channel if configured for dual PTT operation.

6.4 VOX Function

The Voice Operated Exchange (VOX) function allows hands-free transmission. When VOX is enabled, the radio will automatically transmit when it detects your voice, without needing to press the PTT button. Refer to the full user manual for activation and sensitivity adjustment.

6.5 1750Hz Burst Tone

This tone is used to access repeaters. Press the designated button (if configured) to send a 1750Hz burst tone.

6.6 High/Low Power Switchable

The radio supports switching between high (8W) and low (5W/2W) transmit power. This feature helps conserve battery life when high power is not required. Consult the full user manual or programming software for details on how to switch power levels.

6.7 Wire Clone Function

This feature allows you to copy the settings from one UV-6 radio to another using a cloning cable. This is useful for quickly configuring multiple radios with the same settings.

6.8 PC Programming

The BAOFENG UV-6 can be programmed via a computer using specific software and a programming cable. This allows for customization of frequencies, channels, CTCSS/DCS tones, and other advanced features.

Video 1: Product demonstration and features overview.

7. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the radio's surface. Do not use harsh chemicals or solvents.
  • Battery Care: To prolong battery life, avoid overcharging or completely draining the battery. Store the battery in a cool, dry place when not in use.
  • Storage: When storing the radio for extended periods, remove the battery.
  • Water Resistance: The radio has an IP45 rating, meaning it is protected against water jets from any direction. However, it is not designed for submersion.

8. Troubleshooting

  • No Power: Ensure the battery is fully charged and correctly installed. Check the Power/Volume knob.
  • Cannot Transmit or Receive: Verify the antenna is securely attached. Check the selected channel. Ensure you are within range of other radios or repeaters.
  • Poor Audio Quality: Check volume settings. Ensure the microphone and speaker are not obstructed.
  • Radio Not Responding: Try turning the radio off and on again. If issues persist, remove and reinsert the battery.

9. User Tips

  • Programming Cable: For advanced customization and programming, a compatible USB programming cable (often a K-type connector) is required. Ensure you use the correct drivers and software for your operating system.
  • Frequency Range: While the radio supports broad VHF (136-174MHz) and UHF (400-480MHz) ranges, specific channels and frequencies must be programmed according to local regulations and licensing requirements.
  • Battery Life: To maximize battery life during extended use, utilize the low power transmit setting and the Battery Save function when possible.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.