MRSVI XRT122

Contents

MRSVI XRT122 Replacement Remote Control User Manual

1. Introduction

This manual provides instructions for the MRSVI XRT122 Replacement Remote Control, designed for various Vizio HDTVs, Smart TVs, and SmartCast TVs. This remote is ready to use without any programming, offering a seamless replacement experience for your original Vizio remote.

MRSVI XRT122 Remote Control compatible with Vizio 4K UHD TV, Vizio Smart TV, and Vizio Smart Cast TV
The MRSVI XRT122 Remote Control, compatible with various Vizio TV models.

2. Specifications

FeatureDetail
Brand NameMRSVI
Model NumberXRT122
Wireless CommunicationIR (Infrared)
Frequency433 MHz
UseTV
MaterialABS & Plastic
Dimensions6.49 * 1.96 * 0.75 inches
Batteries Required2 * AAA Batteries (not included)
CertificationCE, FCC
MRSVI XRT122 Remote Control with key specifications listed
Key specifications of the XRT122 Remote Control.

3. Setup

3.1 Battery Installation

  1. Open the battery cover on the back of the remote control.
  2. Confirm the correct polarity (+/-) of the batteries.
  3. Insert two fresh AAA batteries into the compartment. (Batteries are not included).
  4. Close the battery cover securely.
Back of MRSVI XRT122 Remote Control showing battery compartment and installation instructions
Instructions for installing AAA batteries in the remote control.

The remote control is designed for immediate use with compatible Vizio TVs and does not require any programming.

4. Operating Instructions

4.1 Button Functions

Diagram of MRSVI XRT122 Remote Control buttons and their functions
Detailed functions of each button on the XRT122 Remote Control.
  • INPUT: Selects the input source (e.g., HDMI 1, HDMI 2).
  • POWER (⑂): Turns the TV on and off.
  • XUMO: Direct access to the XUMO online streaming service.
  • NETFLIX: Direct access to the NETFLIX online streaming service.
  • iHeart RADIO: Direct access to the iHeart RADIO online service.
  • Media Playback Buttons (◀◀, ▶▶, ■, ▶▶): Control media playback (Rewind, Play/Pause, Stop, Fast Forward).
  • CC: Controls the caption decoder (Closed Captions).
  • MENU: Displays the main on-screen menu.
  • INFO: Displays information on the TV screen (e.g., channel, program details).
  • EXIT: Exits the current menu or screen.
  • OK: Confirms a selection or action.
  • Arrow Buttons (▲, ▼, ◄, ►): Navigate through menus and options.
  • BACK: Returns to the previous step or screen.
  • GUIDE: Displays the Electronic Program Guide.
  • VOL +/-: Adjusts the volume level.
  • CH +/-: Changes channels up or down.
  • MUTE (🔇): Cuts off the sound temporarily.
  • PIC: Picture mode selection.
  • RETURN: Returns to the previous menu.
  • Number Buttons (0-9): Direct channel input.
  • ENTER: Confirms numerical input or selection.

4.2 General Usage

Point the remote control directly at your Vizio TV's infrared (IR) receiver. Ensure there are no obstructions between the remote and the TV that could block the signal.

5. Maintenance

5.1 Cleaning

To clean the remote control, gently wipe it with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the remote's surface or internal components.

5.2 Battery Care

If the remote control will not be used for an extended period (e.g., several weeks or months), it is recommended to remove the AAA batteries to prevent potential battery leakage, which can damage the remote.

6. Troubleshooting

6.1 Remote Not Responding

  • Check Batteries: Ensure the AAA batteries are installed correctly with the correct polarity (+/-). Replace with fresh batteries if they are old or depleted.
  • Line of Sight: Make sure there are no objects blocking the path between the remote control and the TV's IR receiver.
  • TV IR Receiver: Verify that the TV's infrared receiver is not covered or obstructed.

6.2 Specific Buttons Not Working

While this remote is broadly compatible, some advanced or TV model-specific functions might behave differently or not be supported. Refer to your Vizio TV's original user manual for details on specific features.

7. User Tips

  • No Programming Required: This remote is designed for immediate use with compatible Vizio TVs, requiring no complex setup or code entry. Simply insert batteries and start using it.
  • Broad Compatibility: The XRT122 remote is compatible with a wide range of Vizio Smart TVs, 4K UHD TVs, and SmartCast TVs, including many D-series and E-series models.

8. Warranty and Support Information

For any product support, technical assistance, or warranty-related inquiries, please contact the seller or manufacturer directly. It is advisable to retain your purchase receipt as proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.