Introduction
Thank you for choosing Phomemo Thermal Label Paper. This manual provides essential information for the proper use, maintenance, and troubleshooting of your thermal label paper. Our labels are designed for a variety of applications, offering clear, durable, and reliable printing results.
Setup
This section guides you through preparing your thermal label paper for use with a compatible printer.
1. Printer Compatibility
Phomemo thermal labels are designed for direct thermal shipping printers. They are compatible with a wide range of brands, including:
- MUNBYN
- Nelko
- ASPRINK
- ROLLO
- OMEZIZY
- ITARI
- IDRPT
- POLONO
- JIOSE
- K COMER
- LABELRANGE
- OFFNOVA
- JADENS
- PHOMEMO
- NEFLACA
- BEEPRT
Note: These labels are not compatible with Dymo or Brother printers.
2. Loading the Label Roll
Refer to your specific thermal printer's manual for detailed instructions on how to load label rolls. Generally, the process involves:
- Open the printer's cover.
- Place the label roll onto the spindle or into the designated compartment, ensuring the labels feed correctly.
- Adjust any guides to fit the label roll snugly.
- Close the printer cover.
- Ensure your printer software is configured for the correct label size (e.g., 50mm x 50mm).
Operating Instructions
Follow these steps for optimal printing and application of your Phomemo thermal labels.
1. Printing
- Ensure your thermal printer is connected to your device and powered on.
- Open the document or application from which you intend to print.
- Select your thermal printer from the print options.
- Verify that the paper size and type settings in your printer preferences match the Phomemo labels (e.g., 50mm x 50mm thermal labels).
- Initiate the print command.
2. Applying Labels
Phomemo labels feature a high-viscosity self-adhesive backing for easy application.
- Gently peel the label from its backing. The white edge easy-to-tear design facilitates this process.
- Apply the label to a clean, dry, and smooth surface.
- Press firmly from the center outwards to remove any air bubbles and ensure strong adhesion.
3. Label Features
Our thermal labels are designed with durability in mind:
- Waterproof: Resistant to splashes and moisture.
- Oil-proof: Protects against oil stains, keeping your labels legible.
- Scratch Resistant: Maintains print integrity against minor abrasions.
- Clear Printouts: Ensures sharp and readable text and graphics without ink.
- Strong Adhesive: Provides secure attachment to various surfaces.
- Easy to Peel: Facilitates quick and efficient application.
- Do Not Fade: High-quality oil layers protect patterns from blurring over time.
Maintenance
Proper storage and care will extend the life and performance of your thermal labels.
1. Label Storage
- Store label rolls in a cool, dry place away from direct sunlight.
- Avoid exposure to high temperatures, humidity, or harsh chemicals, as these can degrade the thermal coating.
- Keep labels in their original packaging until ready for use to protect them from dust and damage.
2. Printer Head Care
While this manual focuses on the labels, maintaining your thermal printer's print head is crucial for clear prints. Regularly clean your printer's thermal print head according to the manufacturer's instructions to prevent residue buildup and ensure consistent print quality.
Troubleshooting
Here are solutions to common issues you might encounter with thermal label paper.
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Faded or unclear prints | Improper printer settings, dirty print head, old labels, or labels exposed to heat/light. | Check printer density/darkness settings. Clean the print head. Ensure labels are stored correctly. Use fresh labels. |
| Labels not sticking properly | Surface is dirty, oily, wet, or textured. Insufficient pressure during application. | Ensure surface is clean, dry, and smooth. Apply firm, even pressure when attaching the label. |
| Printer not recognizing labels | Labels loaded incorrectly, sensor blocked, or incorrect printer settings. | Reload labels correctly. Clean printer sensors. Verify label type and size settings in printer software. |
| Labels peeling off prematurely | Environmental factors (extreme temperature changes), surface material, or label quality. | Ensure labels are applied to appropriate surfaces. Store labels properly. |
Specifications
Detailed specifications for Phomemo Thermal Label Paper.
| Feature | Detail |
|---|---|
| Label Dimensions | 50mm x 50mm (2 inches x 2 inches) |
| Labels per Roll | 500 PCS |
| Material | Thermal Paper, Square/Round Label Stickers |
| Color | Gradient (various patterns available) |
| Roll Aperture | 0.99 inches / 25mm |
| Finish Type | Waterproof, Oil-proof, Scratch Resistant |
| Adhesive Type | High Viscosity Self-Adhesive, No Residue |
| Compatibility | Direct thermal shipping printers (e.g., MUNBYN, Nelko, ROLLO, Phomemo). Not compatible with Dymo or Brother. |
| Application | For Home Use |
User Tips
Maximize your experience with Phomemo Thermal Label Paper with these helpful tips:
- Customization: Pair these eye-catching labels with your custom graphics to make your products unique and impressive.
- Versatile Use: Ideal for small business supplies, schools, families, logistics, kitchen storage, letters, pastry labels, logo stickers, cans, and gift labels.
- Clean Application: For best adhesion, always ensure the surface you are applying the label to is clean, dry, and free of dust or oil.
- Printer Settings: Experiment with your printer's darkness and speed settings to achieve the perfect print quality for different designs and label types.
Warranty and Support
Phomemo products are backed by the manufacturer's commitment to quality. For any issues or inquiries regarding your thermal label paper, please refer to the 'Shop's Three Guarantees' policy provided by your retailer or contact Phomemo customer support directly.
For further assistance, please visit the official Phomemo website or contact your point of purchase.
