1. Introduction
The Radtel RT-850 is a versatile 6-band amateur two-way radio designed for a wide range of communication needs, including amateur radio, air band reception, police scanning, and marine communication. It features a full band transmit/receive capability from 136-660MHz, along with dedicated receive bands for FM radio and aviation. This manual provides essential information for the safe and effective operation of your RT-850 radio.

2. Package Contents
Please check the package carefully to ensure all items are present and in good condition:
- 1 × RT-850 Radio Unit
- 1 × Li-ion Battery (1100mAh)
- 1 × Charger (Desktop charger, plug type may vary by region - EU/US)
- 1 × Belt Clip
- 1 × SMA-Female Antenna
- 1 × Handstrap
- 1 × User's Manual

3. Product Overview
Familiarize yourself with the main components and controls of your RT-850 radio:

- Antenna: For transmitting and receiving signals.
- Power On Knob: Rotates to turn the radio on/off and adjust volume.
- PTT Button (Push-to-Talk): Press and hold to transmit, release to receive.
- Side Key 1 & 2: Programmable function keys.
- MIC/SP Jack (Programming Jack): Connect external microphone/speaker or programming cable.
- Volume Button: Adjusts audio output level.
- Type-C Port: For direct charging and data connection.
- Keypad: For frequency input, menu navigation, and function activation.
4. Initial Setup
4.1 Battery Installation
- Ensure the radio is powered off.
- Align the battery pack with the grooves on the back of the radio.
- Slide the battery pack upwards until it clicks into place.
- To remove, press the battery release latch and slide the battery downwards.
4.2 Antenna Attachment
- Screw the SMA-Female antenna clockwise onto the antenna connector on top of the radio until it is finger-tight. Do not overtighten.
4.3 Charging the Battery
The RT-850 supports two charging methods:
- Desktop Charger: Place the radio (with battery installed) into the desktop charging cradle. Ensure the charging indicator light illuminates.
- USB Type-C: Connect a standard USB Type-C cable to the Type-C port on the radio and to a compatible USB power source (e.g., wall adapter, power bank).
The battery indicator on the display will show charging status. A full charge typically takes several hours.
5. Basic Operation
5.1 Power On/Off and Volume
Rotate the Power On Knob clockwise to turn the radio on. Continue rotating clockwise to increase the volume. Rotate counter-clockwise to decrease volume and turn off the radio.
5.2 Transmitting and Receiving
- To transmit, press and hold the PTT button. Speak clearly into the microphone.
- Release the PTT button to return to receive mode.
5.3 Frequency and Channel Selection
- Frequency Mode: Use the keypad to directly input desired frequencies. Press the 'MENU' button to access settings.
- Channel Mode: The radio supports 128 memory channels. Use the up/down arrow buttons to navigate through stored channels.
5.4 Key Features
- Hidden LCD Display: The 1.77-inch display is integrated for durability and clear visibility.
- Wireless Copy Frequency: This feature allows the radio to decode and copy frequencies and CTCSS/DCS tones from other radios for quick setup. Refer to the detailed manual for specific steps.
- FQSCAN (Frequency/CTCSS Detection): Use this function to detect the frequency and CTCSS/DCS of nearby transmissions.
- VOX Function: Enables voice-activated transmission without pressing the PTT button. Adjust VOX sensitivity in the menu.
- Scan Function: Scans through frequencies or channels to detect active transmissions.
- Emergency Alert/SOS: Activates an alarm signal in emergency situations.
- DTMF Encoding/Decoding: Supports Dual-Tone Multi-Frequency signaling.
- CTCSS/DCS: Continuous Tone-Coded Squelch System / Digital Coded Squelch for filtering unwanted signals.
- PC Programming: The radio can be programmed via PC using a compatible programming cable and software (sold separately). This allows for advanced customization of channels and features.
- FM Radio (68-108MHz RX): Tune into FM broadcast stations.
- Air Band (108-136MHz AM RX): Monitor aviation communications in AM mode.


6. Maintenance
- Cleaning: Wipe the radio with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Battery Care: Avoid overcharging or completely draining the battery. Store the battery in a cool, dry place when not in use for extended periods.
- Storage: Store the radio in a dry, dust-free environment away from direct sunlight and extreme temperatures.
- Durability: The RT-850 is designed with compression, drop, and dust resistance. However, avoid unnecessary impacts or exposure to harsh conditions to prolong its lifespan.

7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on | Battery is low or not installed correctly | Charge the battery fully. Reinstall the battery pack. |
| Cannot transmit or receive | Incorrect frequency/channel, antenna not connected, low battery | Verify frequency/channel settings. Ensure antenna is securely attached. Charge battery. |
| Poor audio quality | Volume too low/high, antenna issue, interference | Adjust volume. Check antenna connection. Move away from sources of interference. |
| Wireless Copy Frequency not working | Source radio too far, weak signal, incorrect mode | Ensure radios are close. Check signal strength. Refer to manual for correct WCF procedure. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | RT-850 |
| Frequency Range (TX) | UHF: 300-520MHz, VHF: 136-299MHz |
| Frequency Range (RX) | 65-108MHz (FM Radio) 108-136MHz (Aviation, AM Mode) 136-520MHz (Full Band Receiving) 144/430MHz (Amateur) 300-390MHz (Police) |
| Stored Channels | 128 |
| Channel Spacing | 12.5K/25KHz |
| Work Voltage | 7.4V DC |
| Battery Capacity | 1100mAh (Li-ion) |
| Output Power | 3W-5W (<5W/1W) |
| Charger Mode | Desktop charger (standard) / Type-C (option) |
| Dimensions (without antenna) | 108*59*38mm |
| Weight (without antenna) | 189g |
| Material | Plastic |
| Waterproof / Water-Resistant | No |
| Display | 1.77 inch display |
| Maximum Range | 3km-5km |
| Wireless Copy Frequency | Supported |

9. User Tips
- Optimize Range: For maximum range (3-5km), ensure your antenna is properly attached and you have a clear line of sight. Obstacles like buildings and terrain can significantly reduce range.
- PC Programming: While the radio offers many features directly, consider using PC programming for advanced customization, channel management, and fine-tuning settings. This can greatly enhance your operating experience.
- Wireless Copy Frequency: This feature is excellent for quickly setting up communication with other radios. Ensure the radios are in close proximity and the signal is clear for best results.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or visit the official Radtel website. Keep your purchase receipt as proof of purchase.