ATK Blazing Sky X1 PRO MAX Mouse User Manual

1. Introduction

Thank you for choosing the ATK Blazing Sky X1 PRO MAX Mouse. This high-performance gaming mouse is designed for esports and office ergonomics, offering both wired and wireless dual-mode connectivity, a lightweight design, and advanced sensor technology for precision and responsiveness. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new mouse.

2. Key Features

• Lightweight Design: Weighing approximately 54g (±3g), the X1 PRO MAX offers effortless maneuverability.
• PAW3950 Flagship Sensor: Provides exceptional accuracy, sensitivity, and stability for precise tracking.
• Wired/Wireless Dual 8000Hz Polling Rate: Experience extreme responsiveness with an 8000Hz polling rate in both wired and 2.4GHz wireless modes, enabled by the ATK Sharks Professional Competitive Firmware and 8K receiver.
• Omron Light Fretting Switches: Durable switches with a lifespan exceeding 70 million clicks, offering fast and tactile feedback.
• Nordic 52840 Master Control Chip: Powers the second generation of SmartSpeed Wireless Transmission Technology for ultra-low latency (average key press delay of 0.3993ms).
• Long-lasting Battery: Equipped with a 500mAh battery, providing up to 150 hours of endurance at 1000Hz polling rate.
• Ice Feeling Coating: A delicate coating that provides a comfortable, anti-fouling, and easy-to-clean surface, preventing slippage during intense use.
• Dual-mode Connection: Seamlessly switch between Type-C wired connection and 2.4GHz wireless mode.
• ATK HUB Web Driver: Customize mouse settings, buttons, and macros efficiently across multiple operating systems.

3. Specifications

General Specifications

Sensor Specifications

Physical Dimensions

• Length: 127mm
• Width: 64mm
• Height: 40mm

4. Setup Guide

4.1. Package Contents

Before you begin, ensure all items are present in the package:

• ATK Blazing Sky X1 PRO MAX Mouse
• 2.4GHz Wireless Receiver (8K receiver for PRO MAX/Ultra models)
• USB Type-C Cable
• User Manual (this document)

4.2. Charging the Mouse

For optimal performance, it is recommended to fully charge the mouse before first use.

1. Connect the included USB Type-C cable to the mouse's Type-C port.
2. Connect the other end of the cable to an available USB port on your computer or a USB wall adapter.
3. The mouse's indicator light will show charging status (refer to the mouse's specific LED behavior for details, usually solid or blinking while charging, turning off or changing color when full).

4.3. Connecting the Mouse

4.3.1. 2.4GHz Wireless Mode

1. Locate the 2.4GHz wireless receiver.
2. Plug the receiver into an available USB port on your computer.
3. Turn on the mouse using the power switch located on the bottom of the mouse.
4. The mouse should automatically connect to the receiver. An indicator light on the mouse may confirm connection.

4.3.2. Wired Mode

1. Connect the included USB Type-C cable to the mouse's Type-C port.
2. Connect the other end of the cable to an available USB port on your computer.
3. The mouse will automatically switch to wired mode and begin charging.

5. Operating Instructions

5.1. Switching Connection Modes

The mouse automatically switches to wired mode when connected via the USB Type-C cable. To use 2.4GHz wireless mode, disconnect the cable and ensure the receiver is plugged in and the mouse is powered on.

5.2. DPI Adjustment

The mouse features a dedicated DPI button, usually located on the top or bottom of the mouse, to cycle through preset DPI levels. Refer to the ATK HUB software for customizing these levels and their corresponding indicator colors.

5.3. Using ATK HUB Web Driver

To unlock the full potential of your ATK Blazing Sky X1 PRO MAX mouse, download and install the ATK HUB Web Driver software. This software allows for extensive customization:

• Button Assignment: Remap buttons to perform various functions, macros, or keyboard shortcuts.
• DPI Settings: Fine-tune DPI levels, set custom stages, and adjust polling rate.
• LOD (Lift-Off Distance) Adjustment: Configure the distance at which the sensor stops tracking when the mouse is lifted.
• Macro Recording: Create and assign complex macros for gaming or productivity.
• Performance Settings: Adjust other sensor parameters for optimal performance.

Visit the official website WWW.ATK.PRO to download the latest ATK HUB Web Driver.

6. Maintenance

6.1. Cleaning

The mouse features an 'Ice Feeling Coating' which is anti-fouling and easy to clean.

• Gently wipe the surface of the mouse with a soft, damp cloth.
• Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the coating and internal components.
• For the sensor area, use a cotton swab lightly dampened with isopropyl alcohol to carefully clean any dust or debris.

6.2. Battery Care

• Avoid fully discharging the battery frequently.
• Store the mouse in a cool, dry place when not in use for extended periods.
• Use only the provided USB Type-C cable for charging.

6.3. Foot Stickers

The mouse uses 100% Teflon foot stickers for smooth gliding. If they become worn, replacement stickers can be purchased from authorized retailers.

7. Troubleshooting

7.1. Mouse Not Responding

• Check Power: Ensure the mouse is turned on and has sufficient battery charge. Connect it via USB-C cable to charge.
• Wireless Connection: For 2.4GHz wireless, ensure the receiver is securely plugged into a working USB port and is within range. Try a different USB port.
• Wired Connection: For wired mode, ensure the USB-C cable is firmly connected to both the mouse and the computer. Try a different USB port or cable.
• Re-pairing: If wireless connection is lost, consult the ATK HUB software or official website for re-pairing instructions.

7.2. Erratic Tracking or Cursor Movement

• Clean Sensor: Clean the optical sensor on the bottom of the mouse with a cotton swab.
• Surface: Ensure you are using the mouse on a clean, uniform surface. Avoid highly reflective or transparent surfaces.
• DPI Settings: Check your DPI settings in the ATK HUB software; they might be too high or too low for your preference.
• Firmware Update: Ensure your mouse firmware is up to date via the ATK HUB software.

7.3. Buttons Not Working

• Software Conflict: Check if any other mouse software or game-specific settings are overriding button assignments.
• ATK HUB: Verify button assignments in the ATK HUB software. Reset to default if necessary.
• Physical Damage: Inspect buttons for any physical obstruction or damage.

8. Warranty and Support

8.1. Warranty Information

The ATK Blazing Sky X1 PRO MAX Mouse comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official ATK website for detailed warranty terms and conditions. Keep your proof of purchase for warranty claims.

8.2. Customer Support

For technical support, driver downloads, or further assistance, please visit the official ATK website:

WWW.ATK.PRO

You may also contact your retailer for support related to purchase and returns.