Introduction
Thank you for purchasing our Ceiling Fan Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new device. Please read it carefully before use and retain it for future reference. This product features a modern design with integrated lighting, adjustable fan speeds, and smart control options via remote and a mobile application.
Video: Product assembly, wiring, and remote control pairing demonstration.
Safety Rules
Prior to installing your ceiling fan, make sure to carefully review all safety instructions in this document. Please retain this manual for future reference. If you encounter any uncertainties or face challenges during the installation process, feel free to reach out to us via the provided support email.
- Prior to commencing the fan installation, switch off the circuit breaker in the fuse box to cut off power.
- Carefully review all instructions and safety guidelines before proceeding with the installation of your new fan.
- Ensure that all wiring adheres to national and local electrical codes. If you lack familiarity with wiring, it is advisable to seek assistance from a certified electrician.
- Avoid bending the blades during installation, while balancing them, or when cleaning the fan.
- Refrain from inserting foreign objects between the rotating fan blades.
- Confirm that the chosen installation site allows the fan blades to rotate freely without encountering any obstacles.
- To minimize the risk of electric shock, disconnect the electrical supply circuit before attaching the light kit.
- Following fan installation, verify that all mounting components are securely in place to prevent the fan from falling.
- Turn off the fan and wait until the blades come to a complete stop before conducting any maintenance or cleaning tasks.
Package Contents
Please check that all items are present and undamaged before proceeding with installation.

Image: Package Content diagram showing the main fan body, remote control, and various screws.
- A. Ceiling fan light body *1
- B. Remote control *1
- C. Wood screws *1
- D. Expansion screws *4
- E. Screwdriver *1
Installation Tools
The following tools are required for assembly and installation:
| Tool | Description |
|---|---|
| Star-head Screwdriver | Used for fastening screws. |
| Wire-stripping Pliers | Used for preparing electrical wires. |
| Stepladder | Required for safe access to the ceiling. |
| Electrical Tape | For securing electrical connections. |
Installation
1. Plate Installation
The circular hanging plate is pre-assembled on the top of the fan. Loosen the 4 side screws to disassemble it first.

Image: Disassembling the circular hanging plate.
Fasten the circular hanging plate to the ceiling using the screws provided:
- For wooden ceiling: Start by drilling a pilot hole in the ceiling using a power drill. Then attach the mounting plate using 4 wood screws.
- For concrete ceiling: Use a hammer drill and a suitable carbide drill bit to create a hole in the base material. After clearing out any debris, insert the 4 expansion screws and tighten them using a wrench.

Image: Mounting plate installation on a wooden ceiling.

Image: Mounting plate installation on a concrete ceiling.
2. Wiring Preparation
Lift the fan towards the ceiling to suspend it from the mounting bracket using the security cable loop and washer hook. This allows you to start wiring without holding the fan body.

Image: J-HOOK for suspending the fan during wiring.
Tip: Seek the help of another person to hold the stepladder in place and to lift the fan up to you once you are set on the ladder.
3. Wiring

Image: Wiring diagram for the fan light controller.
- Put the receiving unit into the top of the fan body and fasten it with electrical tape to avoid movement.
- Make wire connections according to the wire color labels and the diagram above. Ensure the Zero Line (N), Firewire (L), and Ground Wire are correctly connected. The Signal Line is undamageable.
4. Mounting the Fan to the Ceiling

Image: Mounting the fan body to the ceiling.
Once wire connections are completed, lift the fan body carefully and align the collar with the mounting bracket. Tabs on the ceiling plate should seat into the channel on the inside of the fan collar.
Rotate the fan so that the set screw holes on the fan body align with the set screw holes on the ceiling plate. Take care not to pinch or damage internal wires. Insert and firmly tighten two canopy screws from the screw pack.
Tip: Seek the help of another person to hold the stepladder in place and to lift the fan up to you once you are set on the ladder.
Operation
1. Remote Control
This product uses 2.4G wireless digital remote control technology for convenient one-to-one control with strong anti-interference ability.

Image: Remote control layout and button functions.
Remote Control Matching Code:
Turn on the power and press and hold the light pairing key (usually the 'PAIR CODE' button) within 5 seconds of the light turning on. When you hear a beep or the light flashes three times, the code match is successful. If you need to match the code a second time, you need to wait 30 seconds before turning on the power and repeating the above operation.
Note: The remote control has been paired before delivery. Do not operate when in normal use. If the remote control cannot control the light, try the pairing process again. The wireless frequency of the remote control transmitter is 2.4GHz.
2. App Control
Download the App:
Scan the QR code below with your mobile phone to install the application.

Image: QR code for app download.
App Connection Guide (iPhone, Android similar):
- Scan the QR-Code to download the APP and register an account as per the instructions.
- Log in to the account, and click "+" to add the device. You can edit the device name, room, and choose the device type (such as fan light).
- Click on the 'enter' icon within the app to access various functions:
- Language selection (Chinese and English).
- Scan QR code to share device control.
- My QR code (share with others).
- Room management (add room names).
- Instructions (access device-specific instructions).
- Check for updates.
- Feedback point.
CAUTION: To connect to the mobile app, please use the wall switch to control the fan light. Do not use the remote control during the initial app connection, otherwise it will not connect to the phone.
APP Button Function Description:
- Code matching button: Click this button within 5 seconds of turning on the light. If the light source flashes or the buzzer sounds "di", pairing is successful. If it fails, repeat the operation.
- Timer button: After clicking, you can choose a time to turn off the device regularly (e.g., 1H/2H).
- Natural wind button: After clicking, the wind blown by the fan simulates natural wind.
- Sleep mode button: The wind blown by the fan after clicking is suitable for sleep.
- Reverse rotation button: After clicking, the fan will rotate in the reverse direction.
- Change wind direction button: Click to change the direction of the wind.
- Forward rotation button: After clicking, the fan will rotate forward.
- Low brightness white/yellow light: After clicking, the white light and yellow light will light up at the same time, but the brightness is only 10% of the maximum brightness.
- Max brightness white/yellow light: After clicking, the white light and yellow light will light up at the same time, and the brightness is the maximum brightness.
- Max brightness yellow light: After clicking, only the yellow light will light up, and the brightness is the maximum brightness.
- Max brightness white light: After clicking, only the white light will light up, and the brightness is the maximum brightness.
Specifications

Image: Product dimensions and key specifications.
| Feature | Detail |
|---|---|
| Product Name | Ceiling Fan Light |
| Model Number | LF04C02 |
| Brand Name | IRALAN |
| Item Type | Ceiling Fans |
| Installation Method | Assembly |
| Input Voltage | 85-265V |
| Power Source | AC |
| Light Source | LED |
| LED Output Power | 25-36W |
| Luminous Flux | 2000-82000 |
| Is Dimmable | Yes |
| Color Temperature | 3000K-6500K (Stepless Adjustable) |
| Is Bulbs Included | No (Integrated LED) |
| Motor Rated Power | <25W |
| Wind Speed | 1 – 6 gears |
| Reversible Fan | Yes |
| Fan Timing | 1H/2H |
| Control Method | Remote Control, App Control |
| Valid Remote Distance | 8-20 meters |
| Remote Control Battery | No. 7 (AAA) *2 |
| Product Size | Φ50cm (16 inch blade size) |
| Suitable Area | 10-20m² (Suitable for 15-25m² as per image) |
| Weight | 3.3KG (Package weight 3.369KG) |
| Body Material | ABS, Aluminum, Copper |
| Certification | CE |
Maintenance
Here are some suggestions to help maintain your fan:
- Because of the fan's natural movement, some connections may become loose. Check the support connections, brackets, and blade attachment twice a year. Make sure they are secure.
- Clean your fan periodically to help maintain its new appearance over the year. Do not use water when cleaning. This could damage the motor, or possibly cause electrical shock.
- Use only a soft brush or lint-free cloth to avoid scratching the finish. Cleaning products may damage the finished surface.
- There is no need to oil your fan. The motor has permanently lubricated bearings.
- If installed in a coastal, humid environment, regular surface cleaning may be necessary to avoid deterioration or oxidizing effects of salt or other corrosive elements. A Damp Location rating is not an assurance of finish durability. Preventative measures should be taken depending on the environmental exposures your fan will undergo to preserve and protect the finish quality and appearance of your fan.
Troubleshooting
Please read all installation instructions carefully. After reviewing the following tips, if you are unable to solve a problem, please contact customer service for additional assistance.
- Fan makes humming noise:
- Be sure you are using the control set supplied with your fan.
- Make sure all fittings are firmly secured. Loose parts will often cause vibrational noise or humming. Removal and re-attachment can sometimes remedy such resonant vibrational noise.
- Fan not responding to remote control:
- Check that all wire connections are secure and made as instructed.
- Verify that power is on and reaching the receiver by a voltmeter.
- Verify that controller batteries are installed with proper polarity as indicated inside the battery cover.
- Fan jitter:
- Make sure the mounting plate and hardware at the ceiling are secure and firmly fastened. If necessary, use the wood screws provided to further secure the outlet box to the joist.
- Carefully lower motor housing and verify that the mounting plate is secure to the outlet box, screws are tight.
- Light does not work:
- Check wire connections at ceiling and receiver.
- Confirm that LED wire leads and terminal block are properly connected to the LED board.
- Fan makes repetitive ticking noise:
- Check for obstructions in the rotor path.
- Make sure mounting hardware at the ceiling is secure.
- Make sure all other hardware and blade attachments are tight.
- Give fan adequate "Break in Period" of several hours to several days then repeat steps above.
User Tips
- Remote Control Frequency: The remote control operates on a 2.4GHz wireless digital frequency. This information is useful if you are attempting to integrate it with other smart home systems, though direct compatibility with third-party controllers like Tuya is not guaranteed and may require specific setup.
- App Connection: When initially connecting the fan light to the mobile app, ensure you use the wall switch to control the fan light. Using the remote control during this process may prevent successful app connection.
- Light Control: The light can be controlled via both the remote and the app, offering flexibility in adjusting brightness and color temperature.
Warranty and Support
This product comes with a one-year warranty.
For any after-sales inquiries or support, please contact us via email:
sxdsltd@163.com
Used for fastening screws.
Used for preparing electrical wires.
Required for safe access to the ceiling.
For securing electrical connections.