Introduction
The KZ XZ10 True Wireless Bluetooth Earhook Earphones are designed to transform your compatible wired in-ear monitors (IEMs) into a wireless experience. Featuring the Qualcomm QCC5171 chipset and Bluetooth 5.3, these earhooks offer stable, high-fidelity audio transmission with support for aptX Adaptive, SBC, and AAC codecs. With a long-lasting battery and versatile sound modes, the XZ10 provides an immersive listening experience for music enthusiasts and gamers alike.
Key Features
- Qualcomm QCC5171 Chipset: Ensures superb performance with ultra-low power consumption, stable transmission, and zero latency.
- Bluetooth 5.3: Provides stable and fast high-speed signal transmission up to 15 meters, with intelligent reconnection and memory recognition of paired devices.
- aptX Adaptive Decoding: Supports SBC/AAC/APTX lossless decoding protocols, accurately restoring audio details and reducing information loss for a high-quality sound experience.
- Extended Battery Life: Approximately 12 hours of playback on a single earhook charge, with the 800mAh charging case providing up to 6 additional charges for a total of 72 hours.
- 0.75mm Standard Interface: Compatible with commonly found 2-pin detachable earphones, allowing you to convert your wired IEMs to wireless.
- Independent Amplifier Chip: Effortlessly drives multiple balanced armature and dynamic driver earphones.
- Three Sound Effect Modes: Easily switch between Gaming Mode (zero-delay), Standard Mode (applicable to various music styles), and Full-Power (HiFi) Mode (HiFi sound quality experience).
- Individual Earhook Use: Each earhook can be used independently as a separate host.
- Ultra-High Signal-to-Noise Ratio: 105.1dB for excellent sound quality.
- Ergonomic Design: Skin-friendly silicone material and an around-ear design for comfortable and secure wear.
Setup
1. Charging the Earhooks and Case
Before first use, fully charge the KZ XZ10 earhooks and their charging case. Place the earhooks into the charging case. Connect the charging case to a power source using a compatible USB cable. The indicator light on the case will show charging status.
2. Connecting to Wired Earphones
The XZ10 earhooks feature a 0.75mm standard 2-pin interface. Carefully connect your compatible detachable wired earphones to the earhooks. Ensure a secure connection for optimal audio transmission.
3. Bluetooth Pairing
- Ensure the earhooks are charged and connected to your IEMs.
- Take the earhooks out of the charging case. They will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "KZ XZ10" from the list of found devices to connect.
- Once paired, the earhooks will automatically reconnect to your device when taken out of the case, provided Bluetooth is enabled on your device.
Operating Instructions
One-Click Control Functions
The KZ XZ10 earhooks feature intuitive one-button controls. Refer to the diagram below for specific actions:
- Play/Pause: Click once on either earhook.
- Last Song: Double-click on the left earhook.
- Next Song: Double-click on the right earhook.
- Start Siri (Voice Assistant): Long press for 2 seconds on either earhook.
- Hang up/Answer Call: Click once on either earhook during a call.
- Reject Call: Long press on either earhook when an incoming call is received.
Switching Sound Effect Modes
The XZ10 offers three distinct sound modes to suit different listening preferences:
- Gaming Mode / Standard Mode: Three clicks on the right earhook to cycle between these two modes. Gaming Mode provides a zero-delay experience, while Standard Mode is suitable for various music styles.
- Full-Power (HiFi) Mode: Three clicks on the left earhook to activate this mode for a high-fidelity sound experience.
Individual Earhook Use
Each earhook can function independently. After initial pairing, you can use either the left or right earhook on its own. When you place one back into the charging case, the other will automatically shut down, and the remaining earhook will continue to operate.
Maintenance
- Cleaning: Regularly wipe the earhooks and charging case with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use, store the earhooks in their charging case to protect them and keep them charged. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Moisture: Do not expose the earhooks or charging case to water or excessive moisture.
- Charging: Use the provided charging cable or a certified equivalent. Avoid overcharging or completely draining the battery for extended periods to prolong battery life.
Troubleshooting
- Earhooks not pairing or connecting:
- Ensure both earhooks are fully charged.
- Make sure Bluetooth is enabled on your device.
- Place the earhooks back into the charging case, close the lid, then open it again and take them out to re-enter pairing mode.
- Try forgetting "KZ XZ10" in your device's Bluetooth settings and re-pairing.
- Ensure your device is within the 15-meter Bluetooth range.
- Poor sound quality or intermittent connection:
- Check the connection between the earhooks and your wired IEMs. Ensure the 2-pin connectors are securely seated.
- Move closer to your connected device to avoid interference or range issues.
- Ensure there are no physical obstructions between the earhooks and your device.
- Try switching between sound modes (Standard, HiFi) to see if it improves audio.
- Earhooks not charging:
- Verify the charging cable is securely connected to both the case and the power source.
- Ensure the earhooks are correctly seated in the charging case.
- Try a different charging cable or power adapter.
- Controls not responding:
- Ensure the earhooks are connected to your device.
- Try restarting the earhooks by placing them in the case and taking them out again.
- Some functions may vary depending on your connected device.
Specifications
| Feature | Specification |
|---|---|
| Model | KZ XZ10 |
| Bluetooth Version | 5.3 |
| Bluetooth Chipset | Qualcomm QCC5171 |
| Transmission Protocols | aptX Adaptive, SBC, AAC, APTX |
| Earphone Playing Time | ~12 hours (single charge) |
| Earhooks Battery Capacity | 50mAh (each) |
| Charging Case Battery Capacity | 800mAh |
| Total Battery Life (with case) | ~72 hours |
| Bluetooth Range | Up to 15 meters |
| Signal-to-Noise Ratio | 105.1dB |
| Interface | 0.75mm standard 2-pin |
| Charging Case Dimensions (approx.) | 80mm (W) x 69mm (L) x 59mm (H) |
Note: The above data is based on laboratory measurements; actual performance may vary. Dimensions are approximate and subject to minor variations.
User Tips
- Optimal Fit: Experiment with different ear tips on your IEMs to find the best seal and comfort. A good seal is crucial for optimal sound quality and bass response.
- Sound Mode Exploration: Take time to try out all three sound modes (Gaming, Standard, HiFi) to discover which one best suits your audio content and personal preference.
- Charging Habits: For best battery longevity, avoid frequently letting the battery drain completely. Charge the case and earhooks regularly.
- Firmware Updates: Check the KZ official website or app (if available) for any potential firmware updates that might enhance performance or add new features.
Warranty and Support
KZ products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your retailer. If you encounter any issues or require technical assistance, please reach out to the seller or KZ customer support.
