Qualitell ZSM240915

Contents

Qualitell Electric Mosquito Swatter E3 User Manual

Model: ZSM240915 | Brand: Qualitell

1. Introduction

Thank you for choosing the Qualitell Electric Mosquito Swatter E3. This innovative 3-in-1 device serves as a handheld electric mosquito swatter, a desktop mosquito killing lamp, and a wall-mounted automatic mosquito trap. Featuring a digital power display and a safe five-layer power grid, it provides an efficient and convenient solution for mosquito and insect control. Please read this manual carefully before use to ensure proper operation and safety.

2. Package Contents

Please check the package for the following items:

  • Qualitell Electric Mosquito Swatter E3
  • Charging Base (for desktop use)
  • Wall Mount Base
  • User Manual
Qualitell Electric Mosquito Swatter E3 and its accessories
Product packaging and included accessories: swatter, charging base, wall mount, and manual.

3. Product Features

  • 3-in-1 Functionality: Can be used as a handheld swatter, a desktop mosquito killing lamp, or a wall-mounted automatic mosquito trap.
  • Intelligent Digital Display: Shows remaining power (e.g., '99') and charging status, eliminating guesswork.
  • Purple Light Anti-mosquito Technology: Built-in 395nm UV light beads attract mosquitoes and flies for efficient trapping.
  • Five-Layer Power Grid Design: Features front and back safety protection mesh layers and a 3*3mm high-density intermediate power grid for effective insect elimination while preventing accidental contact.
  • Long-lasting Battery: Equipped with a built-in 1200mAh battery, providing approximately 1 month of use (based on 10 minutes per day) after a 2-hour charge.
  • Double Switch Safety: Ensures safe operation with distinct modes and an electric shock starting button.
Image showing the three modes of use: desktop, wall-mounted, and handheld.
The Qualitell E3 offers versatile use as a desktop lamp, wall-mounted trap, or handheld swatter.
Diagram of the five-layer power grid design.
Detailed view of the five-layer safety power grid, designed to prevent accidental contact.

4. Setup

4.1 Initial Charging

Before first use, fully charge the mosquito swatter. The digital display will show the charging progress. A full charge takes approximately 2 hours.

  • Connect the swatter to a DC 5V power source using a compatible charging cable (not included, as per product specifications).
  • The digital display will indicate charging status.
  • Do not use the product while charging.
  • The maximum charging time should not exceed 12 hours.
Close-up of the digital display and control switch with labels.
The digital display shows battery level and charging status.

4.2 Assembling for Desktop Use

To use as a desktop mosquito killing lamp, simply insert the handle of the swatter into the provided charging base. Ensure it is stable on a flat surface.

4.3 Installing for Wall-mounted Use

For wall-mounted automatic mosquito killing, attach the wall mount base to a smooth, clean surface (e.g., ceramic tiles, glass, metal coatings) using traceless glue (not included, or pre-applied if specified). Wait 24 hours after sticking before hanging the swatter. Do not use on painted walls, cement walls, latex paint walls, or wallpaper.

5. Operating Instructions

The swatter has three gear modes: Shutdown, Electric Shock, and Mosquito Trap.

5.1 Handheld Electric Shock Mode

  1. Push the gear switch to the "Electric Shock" mode.
  2. Long press the "Electric shock starting button" (located on the handle). The indicator light will turn red.
  3. Swing the swatter to kill mosquitoes.
  4. Release the "Electric shock starting button". The indicator light will turn off, and the net surface will automatically eliminate residual power.
Handheld swatter zapping a mosquito.
Using the swatter in handheld electric shock mode.

5.2 Desktop Mosquito Killing Lamp Mode

  1. Place the swatter in its charging base on a flat surface.
  2. Push the gear switch to the "Mosquito Trap" mode.
  3. The built-in purple UV light will activate, attracting mosquitoes to the electric grid.
Two swatters, one on a desktop base, showing purple light attraction.
The swatter in desktop mosquito trap mode, emitting purple light.

5.3 Wall-mounted Automatic Mosquito Killing Mode

  1. Hang the swatter on the installed wall mount base.
  2. Push the gear switch to the "Mosquito Trap" mode.
  3. The wall mount base will automatically activate the electric mosquito switch, and the UV light will attract and kill mosquitoes that touch the net.
Wall-mounted swatter in a bedroom at night, showing its automatic mosquito killing function.
The swatter operating in wall-mounted automatic mosquito killing mode at night.

5.4 Shutdown Mode

To turn off the device, push the gear switch to the "Shutdown" mode.

6. Maintenance

  • Cleaning: Do not rinse the electric mosquito swatter with water or wipe it with a wet towel. Keep it dry to avoid damage to internal electronic components. Use a dry brush or cloth to gently clean the grid.
  • Storage: When not in use, turn the power switch to the "off" position. Store in a dry place away from children.

7. Precautions and Safety Warnings

Image listing six precautions for using the electric mosquito swatter.
Important safety precautions to follow during use.
  1. When the electric mosquito swatter is working, there is high pressure on the wire fence sides. Do not touch the wire fence surfaces with your hands or hold metal objects.
  2. The electric mosquito swatter is a tool for killing mosquitoes and flies. There may be residual current after use. Do not use it as a toy for children.
  3. Do not use it in flammable gas or liquid places, and do not often use conductive materials such as metals to spark at a wire fence.
  4. Do not rinse with water or wipe with a wet towel. Please keep the electric mosquito swatter dry to avoid damage to internal electronic components.
  5. When not in use, turn the power switch to the "off" position, and do not pat other hard objects to avoid damaging the wire fence side.
  6. Please charge the product in time after the power is used up. Do not use the product when charging. The maximum charging time should not exceed 12 hours.

* Light waves from the UV lamp do not hurt eyes or cause radiation, and are harmless to the human body.

8. Troubleshooting

  • Device not turning on: Ensure the battery is charged. Check the digital display for battery level.
  • Weak electric shock: The battery might be low. Recharge the device.
  • UV light not working: Ensure the device is in "Mosquito Trap" mode and has sufficient power.
  • Digital display not showing: The device might be completely out of power or in shutdown mode. Charge the device.

9. Specifications

Parameter Detail
Brand Qualitell
Product Name Qualitell Electric Mosquito Swatter
Product Model ZSM240915
Product Material PC
Product Color White
Product Size 450*230*28mm
Packing Size 455*235*45mm
Product Weight 371g
Battery Capacity 1200mAh
Rated Voltage DC 5V
Rated Power 2W
Battery Included Yes
Inbox Adaptor No
Implementation Standards GB4706.76-2008, GB4706.1-2005

10. User Tips

  • For optimal performance in mosquito trap mode, use the device in a dark room. The UV light is most effective when it's the primary light source attracting insects.
  • Regularly check the digital display to monitor battery life and recharge promptly to ensure continuous protection.
  • When using the wall-mounted feature, ensure the surface is smooth and clean for the adhesive to bond properly. Allow sufficient curing time for the adhesive before hanging the swatter.

11. Warranty & Support

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.