Introduction
The Lemorele LC06-Plus USB to HDMI Adapter is designed to expand your computer's display capabilities by converting a USB port to an HDMI output. This allows you to connect an additional monitor, projector, or TV, supporting resolutions up to 1920x1080 at 60Hz. It's an ideal solution for enhancing productivity through multiple displays, whether for work, presentations, or entertainment. Its compact and lightweight design, coupled with a durable aluminum alloy casing for efficient heat dissipation, makes it a reliable and portable accessory for various devices and applications.

Figure 1: Lemorele LC06-Plus USB to HDMI Adapter
Package Contents
- 1 x Lemorele LC06-Plus USB to HDMI Adapter
- 1 x User Manual

Figure 2: Adapter and User Manual included in the package
Specifications
| Feature | Specification |
|---|---|
| Model | LC06-Plus |
| Type | USB to HDMI Adapter |
| Input Port | USB-A Male |
| Output Port | HDMI Female |
| Max Resolution | 1920x1080 @ 60Hz (Full HD) |
| Cable Length | 0.14m (approximately 5.5 inches) |
| Adapter Dimensions (approx.) | 1.37 in (W) x 2.14 in (L) x 0.59 in (H) |
| Casing Material | Aluminum Alloy |
| Supported Operating Systems | Windows 10+, macOS 10.15+ (driver installation required) |
| Unsupported Operating Systems | Linux, Vista, Chrome OS, Firestick |

Figure 3: Input and Output Device Compatibility
Setup and Driver Installation
Before using the Lemorele LC06-Plus adapter for the first time, driver installation is required. Please follow the instructions below for your specific operating system.
Windows Driver Installation
- Connect the USB-A end of the adapter to an available USB port on your Windows PC.
- The system should detect the adapter and may present a virtual CD drive (e.g., "CD Drive (G:) UDisplay"). Open this drive.
- Locate and run the driver installation file (e.g., "UDisplay" plugin).
- Follow the on-screen prompts to complete the installation.
- If you encounter any issues, ensure your system is connected to the internet and try an online driver upgrade. Do not pause or terminate the update once it has started.

Figure 4: Windows Driver Installation Prompt
macOS Driver Installation (macOS 10.15 and above)
- Connect the USB-A end of the adapter to an available USB port on your MacBook or iMac.
- Open the virtual CD Drive (e.g., "UDisplay") that appears.
- Click "Install UDisplay" to begin the driver installation.
- If a "System Extension Blocked" message appears, click "OK".
- Go to "System Preferences" > "Security & Privacy".
- In the "General" tab, click the lock icon at the bottom left to make changes, then enter your password.
- Click "Allow" next to the message "System software from developer 'DisplayLink Corp' was blocked from loading."
- A prompt to "Open Security & Privacy" may appear; click it.
- Click "Allow" again if prompted.
- Open "DisplayLink Manager" from your Applications folder or the virtual drive.
- In "System Preferences" > "Security & Privacy" > "Privacy" tab, select "Screen Recording" from the left sidebar.
- Check the box next to "DisplayLink Manager" to grant screen recording permissions.
- Click "Quit & Reopen" if prompted.
- Navigate to "System Preferences" > "Displays" to configure your external monitor settings.

Figure 5: macOS Driver Installation Steps
For a visual guide on macOS and Windows system operation, please refer to the video below:
Video 1: MacBook/Windows System Operation Method
Operating Instructions
Once the drivers are successfully installed, you can connect your external display and configure its settings.
Connecting the Adapter
- Ensure your computer is powered on.
- Connect the USB-A male connector of the LC06-Plus adapter to an available USB port on your computer.
- Connect an HDMI cable (not included) from your external display (monitor, TV, or projector) to the HDMI female port on the LC06-Plus adapter.
- Power on your external display and select the correct HDMI input source.
Display Modes
The adapter supports two primary display modes:
- Extend Mode: Extends your desktop across multiple screens, allowing you to have different applications open on each display. This is ideal for multitasking and increasing productivity.
- Duplicate (Mirror) Mode: Duplicates your primary display onto the external screen, showing the same content on both. This is useful for presentations or sharing content.
Configuring Display Settings (Windows)
After connecting, Windows should automatically detect the new display. You can adjust settings:
- Right-click on your desktop and select "Display settings" or "Screen resolution".
- Here you can arrange your displays, choose between "Extend these displays" or "Duplicate these displays", and adjust resolution and orientation.

Figure 6: Windows Display Modes (Mirror and Extend)
Configuring Display Settings (macOS)
For macOS, after driver installation and connection:
- Go to "System Preferences" > "Displays".
- In the "Arrangement" tab, you can drag and drop displays to arrange them, and check "Mirror Displays" for duplicate mode or uncheck for extend mode.

Figure 7: macOS Display Modes (Mirror and Extend)

Figure 8: Example of Multiple Display Setup
Troubleshooting
- No Display/Signal:
- Ensure the adapter's USB connector is fully inserted into your computer's USB port.
- Verify the HDMI cable is securely connected to both the adapter and your external display.
- Check that your external display is powered on and set to the correct HDMI input source.
- Confirm that the necessary drivers are installed correctly for your operating system. Refer to the "Setup and Driver Installation" section.
- Try restarting your computer and reconnecting the adapter.
- Driver Installation Issues:
- Ensure you have an active internet connection during driver installation for potential online updates.
- For macOS, double-check "Security & Privacy" settings to ensure DisplayLink Manager has the necessary permissions (especially "Screen Recording").
- If problems persist, try uninstalling and reinstalling the driver.
- Flickering or Unstable Display:
- Check the HDMI cable for damage; try a different HDMI cable if available.
- Ensure your computer's graphics drivers are up to date.
- Reduce the display resolution if your system or cable struggles to maintain a stable signal at 1080p.
- Unsupported OS:
- This adapter is not compatible with Linux, Vista, Chrome OS, or Firestick devices. Attempting to use it with these systems will not work.
User Tips
- Driver Updates: Always ensure your DisplayLink drivers are up-to-date. Manufacturers frequently release updates that improve performance and compatibility. Check the official Lemorele or DisplayLink website for the latest versions.
- Optimal Performance: For the best visual experience, especially with video playback, ensure your computer meets the minimum system requirements for running multiple displays at 1080p 60Hz.
- Heat Dissipation: The adapter features an aluminum alloy casing for efficient heat dissipation. While normal operation may cause the device to warm up, ensure it has adequate ventilation and is not covered to prevent overheating.
Maintenance
- Keep the adapter clean by wiping it with a soft, dry cloth.
- Avoid exposing the adapter to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble or modify the adapter, as this will void any warranty and could cause damage.
- Store the adapter in a cool, dry place when not in use.

Figure 9: Aluminum Alloy Casing for Heat Dissipation
Warranty and Support
For warranty information, technical support, or service inquiries regarding your Lemorele LC06-Plus USB to HDMI Adapter, please contact the seller or visit the official Lemorele website. Please have your product model (LC06-Plus) and purchase details ready when seeking support.