1. Introduction
The Neewer CN-160 LED Video Light is designed to provide optimal illumination for digital cameras and camcorders. It features 160 LED bulbs, offering adjustable brightness and color temperature with included filters. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure safe and effective use of your device.

Figure 1: Neewer 160 LED Video Light with included filters.
2. Components Overview
Familiarize yourself with the parts of your Neewer CN-160 LED Video Light:

Figure 2: Detailed diagram of the LED Video Light components.
- LED Mounting Board: Contains 160 LED bulbs for illumination.
- Slot: Used for sliding in the diffuser and color filters.
- Switch and Dimmer: A rotary knob for power ON/OFF and brightness adjustment.
- Screw: Secures the hot shoe adapter to the light.
- Hot Shoe Adapter: Connects the LED light to a camera's hot shoe mount or other compatible equipment.
- Battery Cover: Secures the battery in place.
- Battery Adapter: Specifically designed for Panasonic Li-ion batteries.
- Battery Level Indicator: LED lights that show the current power output.
- Button for Power Level: Activates the battery level indicators.
- Diffuser and Filters: Includes a soft light diffuser and an orange filter (3200K) for color temperature adjustment.
- Gels Holder: For holding the diffuser and filters in place.
3. Technical Specifications
| Parameter | Value |
|---|---|
| LED Quantity | 160 pcs |
| Total Power | 9.6 Watt |
| Voltage Range | 7.4V - 8.4V |
| Color Temperature | 5600K (3200K with orange filter) |
| Luminous Flux | 660 lm |
| Runtime | 60-80 minutes (depending on battery type and brightness) |
| Illumination (at 1m) | 900 Lux |
| Effective Distance | 6m / 20ft |
| Dimensions (LxWxH) | 141mm x 62mm x 150mm (5.5in x 2.2in x 3.74in) |
| Net Weight | 0.24 kg / 8.57 oz |
| Outer Shell Material | ABS Plastic |
| Power Source | AC (via adapter, not included), Battery (not included) |
| Certification | UL |

Figure 3: Product dimensions and brightness adjustment knob.
4. Setup Instructions
4.1. Battery Installation
The Neewer CN-160 is compatible with several battery types (not included):
- AA Ni-MH or alkaline batteries (6 pieces)
- Sony NP-FH, NP-FM, NP-F Series Li-ion batteries (e.g., NP-F550/F750/F970)
- Panasonic CGR-D16S Li-ion battery

Figure 4: Compatible battery types and battery compartment.
- For AA Batteries: Open the battery cover. Insert 6 AA batteries, ensuring correct positive (+) and negative (-) polarity as marked inside the compartment. Close the battery cover securely.
- For Sony NP-F Series Li-ion Batteries: Open the battery cover. Position the battery with the correct size and direction into the holder and press evenly to ensure it is snug. Close the battery cover securely.
- For Panasonic CGR-D16S Li-ion Batteries: If installing a Panasonic battery, the included battery adapter must be mounted on the battery holder to accommodate the Panasonic battery. Then, insert the battery with the adapter into the compartment and close the cover.
Note: Batteries are not included and must be purchased separately.
4.2. Mounting the LED Light
The CN-160 can be mounted on various camera equipment:

Figure 5: Mounting options and rotation capability.
- On a Camera (Hot Shoe): Slide the hot shoe adapter of the LED light into the camera's standard hot shoe mount. Tighten the screw on the hot shoe adapter to secure the light.
- On a Tripod or Light Stand (1/4" Thread): The light features a 1/4" screw hole at its base. Attach the light to any tripod or light stand equipped with a 1/4" screw.
5. Operating Instructions
5.1. Power On/Off and Brightness Adjustment
- Power On: Rotate the Switch and Dimmer knob clockwise until you hear a click, indicating the light is powered on.
- Adjust Brightness: Continue rotating the knob to increase or decrease the light intensity. Adjust according to your shooting needs.
- Power Off: Rotate the Switch and Dimmer knob counter-clockwise until it clicks off.
5.2. Adjusting Light Direction
The LED light is equipped with a pivoting head for angle adjustment:
- Loosen the adjusting knobs on the side of the hot shoe adapter.
- Adjust the light to the desired angle (up, down, or 180° horizontal rotation).
- Tighten the knobs to secure the light in position.
5.3. Using Diffuser and Filters
The light comes with a soft light diffuser and an orange (3200K) filter:

Figure 6: Effect of different filters.
- Without Filter: The lamp acts as a spotlight, suitable for long-distance shooting.
- With Soft Light Diffuser: Slide the diffuser into the slots on the light. This creates a soft light effect, ideal for short-distance shooting and reducing harsh shadows.
- With Orange (3200K) Filter: Slide the orange filter into the slots. This changes the color temperature from 5600K to 3200K, providing a warmer light.
5.4. Checking Battery Level
- Press the "Button For Power Level" located near the battery compartment.
- The Battery Level Indicators (LEDs) will light up to show the current power output. All indicators lit mean full power. Fewer indicators mean lower power. No indicators mean the battery needs recharging or replacing.
6. Maintenance and Care
- Always turn off the power after use to prevent battery drain and excessive heat, which can affect the lifespan of the LED bulbs.
- If using AA batteries, remove them when the LED light is not in use for extended periods to prevent potential damage to the internal circuit.
- Do not exert excessive force when inserting or removing batteries to avoid damaging the battery holder.
- Do not lift the camera by holding only the LED light, as this may put undue stress on the hot shoe mount.
- Avoid storing or using the light in damp conditions.
- Protect the light from long-term direct exposure to sunlight to maximize its service life.
- Clean the light with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | Battery depleted or incorrectly inserted; Power knob off. | Check battery charge and polarity. Ensure power knob is turned on. Replace batteries if necessary. |
| Low light output | Low battery charge; Dimmer set too low. | Check battery level indicators and replace/recharge batteries. Adjust dimmer knob to increase brightness. |
| Light flickers or turns off unexpectedly | Loose battery connection; Faulty battery. | Ensure batteries are securely seated. Try a different set of batteries. |
| Brightness dial seems reversed | Manufacturing variation. | Operate the dial to find the desired brightness, regardless of the perceived direction. |
| Light gets hot during use | Normal operation for high-power LEDs. | This is normal. Ensure adequate ventilation. Turn off when not in active use to prevent overheating and prolong lifespan. |
8. User Tips
- For optimal performance and longer runtime, consider using NP-F series Li-ion batteries (e.g., NP-F970) instead of AA batteries. AA batteries are suitable for emergency use but have a shorter life.
- Always carry spare batteries, as the light does not include them and runtime can vary.
- While the light is bright, its plastic construction suggests careful handling to avoid damage.
- If the brightness dial feels reversed (dialing up decreases brightness, and vice-versa), simply adjust it to achieve your desired light level.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official NEEWER website or contact your retailer. Keep your purchase receipt as proof of purchase.