OBD2 Scanner YM519

Contents

YM519 OBD2/EOBD+CAN Car Diagnostic Tool User Manual

Model: YM519

This manual provides detailed instructions for the safe and effective use of your YM519 Car Diagnostic Tool.

Product Overview

The YM519 is a professional multilingual OBD2/EOBD+CAN car diagnostic tool designed to help you diagnose engine system faults and test battery health. It features a new generation UI for intuitive interaction, a durable TPU protective case, new silicone buttons, and three high-brightness indicator lights for clear status indication. Its unique non-slip shell design ensures comfortable one-hand operation.

YM519 OBD2 Scanner with battery test feature
YM519 OBD2 Scanner with battery test feature and main menu.

Setup Instructions

  1. Locate the OBD2 Port: The OBD2 port is typically located under the dashboard on the driver's side of your vehicle. Consult your vehicle's owner's manual if you cannot find it.
  2. Connect the Scanner: Plug the YM519's universal OBD plug into your vehicle's OBD2 port. No extra charger is needed as the device draws power from the vehicle.
  3. Power On: Once connected, the scanner should power on automatically.
  4. Language Selection: Navigate to the 'Setting' menu and select 'Language' to choose your preferred language from the 13 available options.
YM519 connected to car, showing full functional menu
Connecting the YM519 to a vehicle's OBD2 port.
YM519 Language selection menu
Language selection interface on the YM519.

Operating Instructions

The YM519 supports OBDII/EOBD nine standard protocols for comprehensive vehicle diagnostics. Use the navigation buttons (up, down, left, right, OK, EXIT, F1, F2) to move through the menus.

Key Functions:

  • Read Codes: Read engine or emission-related fault codes. This function displays stored, pending, and permanent codes.
  • Clear Codes: Erase and delete the fault codes from the vehicle's computer. This will turn off the Malfunction Indicator Lamp (MIL).
  • Live Data Stream: View real-time PCM data in both text and graph modes. This includes vehicle speed, load value, coolant temperature, engine speed, and more.
  • Freeze Frame: Capture a snapshot of sensor readings when a fault code is set, providing valuable context for diagnosis.
  • I/M Readiness: Check the readiness status of various emission-related monitors to determine if the vehicle is ready for an emissions test.
  • Vehicle Information: Retrieve vehicle identification number (VIN), calibration ID, and calibration verification number (CVN).
  • Battery Test: Measure battery voltage, monitor voltage over time, and assess battery life.
  • Mode 6 Test: Perform advanced test results for specific monitored systems.
  • Oxygen Sensor Test: Retrieve O2 sensor monitor test results.
YM519 Read Codes/Erase Codes screen
Reading and erasing trouble codes with the YM519.
YM519 displaying live PCM data stream
Real-time data synchronization and live PCM data display.
YM519 Built-in Voltage Test details
Built-in voltage test for battery measurement and monitoring.

Video Demonstration:

Product demonstration video showing key functions and interface.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using abrasive cleaners or solvents.
  • Storage: Store the scanner in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Care: Avoid bending or crimping the OBD2 cable excessively to prevent damage.
  • Software Updates: Check the manufacturer's website periodically for any available software updates to ensure optimal performance and compatibility.

Troubleshooting

The YM519 is designed to assist in diagnosing common vehicle issues. Here's how it can help:

  • Engine Fault Light (MIL) On: Use the 'Read Codes' function to identify the specific Diagnostic Trouble Codes (DTCs) causing the light. After addressing the underlying issue, use 'Clear Codes' to turn off the MIL.
  • Battery Issues: The 'Battery Test' function can help determine if a battery circuit failure or low voltage is present, providing voltage readings and life assessment.
  • General Car Breakdown/Performance Issues: Utilize 'Live Data Stream' to monitor various engine parameters in real-time, which can help pinpoint performance anomalies. 'Freeze Frame' data can also provide clues about conditions when a fault occurred.
  • Emissions Test Preparation: The 'I/M Readiness' function allows you to check if all emission monitors are complete, helping you prepare for a successful emissions test.
YM519 addressing common car issues (battery, engine light, breakdown)
How the YM519 can help diagnose common car problems.
YM519 showing fault code query and processing
One-click query for car faults and processing DTCs.

Specifications

FeatureDetail
ModelYM519
Item TypeCode Readers & Scan Tools
Screen2.8 inch Color Screen
Dimensions (H x W x D)14.5 cm (5.7 inch) x 8.5 cm (3.34 inch) x 2.8 cm (1.1 inch)
Weight0.4 kg
Supported ProtocolsSAE J1850 PWM, SAE J1850 VPW, ISO9141-2, ISO14230-4 KWP (5 baud init), ISO14230-4 KWP (fast init), ISO15765-4 CAN (11bit ID, 500 Kbaud), ISO15765-4 CAN (29bit ID, 500 Kbaud), ISO15765-4 CAN (11bit ID, 250 Kbaud), ISO15765-4 CAN (ID 29bit, 251 Kbaud)
Supported LanguagesChinese, English, Korean, Japanese, Russian, Polish, Portuguese, Finnish, Italian, French, Spanish, Dutch, German (13 languages)
CertificationCE
OriginMainland China
YM519 Dimensions diagram
Dimensions of the YM519 Scanner Diagnostic Tool.

User Tips

  • Cable Length: Ensure the diagnostic cable is long enough to comfortably reach your vehicle's OBD2 port from your preferred operating position.
  • Engine Off for Connection: Always connect or disconnect the scanner with the vehicle's ignition off to prevent potential issues.
  • Battery Test Accuracy: For the most accurate battery test results, ensure the vehicle has been off for at least an hour before testing.

Warranty & Support

For specific warranty information, please refer to the documentation provided at the time of purchase or contact your seller directly. For technical support or further assistance, consult the troubleshooting section of this manual or reach out to the product's customer service.

© 2023 YM519 Diagnostic Tool. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.