1. Introduction
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your GreenTouch 86-inch Infrared Multi-touch Screen Overlay Kit. This kit transforms a standard display into an interactive multi-touch screen, supporting up to 20 touch points. It is designed for various applications, including interactive whiteboards, digital signage, and educational tools.
The GreenTouch Infrared Touch Frame features an aluminum alloy shell, offering strong stability and a slim design. It is plug-and-play compatible with multiple operating systems via USB.
Figure 1: GreenTouch 86-inch Infrared Touch Frame
2. Package Contents
Please verify that all the following components are included in your package:
- Infrared Touch Frame components (four strips: A, B, C, D)
- Screwdriver
- Mounting screws
- USB cable (integrated with one frame strip)
Figure 2: Disassembled components of the touch frame kit
3. Setup and Installation
Follow these steps to assemble and install your infrared touch frame:
Prepare the Workspace: Place the disassembled IR touch frame components on a clean, flat desktop or surface. Ensure you have enough space to work.
Figure 3: Overview of frame components and connection points
Connect Frame Strips: Pay close attention to the marked ends of each strip (A, B, C, D). Connect them as follows:
- Connect A to A
- Connect B to B
- Connect C to C
- Connect D to D
Ensure the 10-pin connectors on the ends of strips A, B, and D are properly aligned and pushed into their respective sockets. The C end does not have a pin and does not require a connection.
Figure 4: Detailed pin connection for stable signal transmission
Secure Corners: Once all strips are connected to form a full frame, place the corner covers over the joints and secure them tightly with the provided screws using the screwdriver.
Figure 5: Securing the frame corners with screws
Connect to PC: After assembly, connect the USB cable from the touch frame to your PC. The device is plug-and-play and free of drivers for supported operating systems.
Figure 6: USB connection and OS compatibility
Initial Test: Wait for approximately 10 seconds after plugging in the USB cable for the system to recognize the touch frame. Then, test its function, sensitivity, and touch points. Ensure the frame is laying flat during testing.
Video 1: Assembly and Touch Test Demonstration
4. Operating Instructions
The GreenTouch Infrared Multi-touch Screen Overlay Kit is designed for intuitive use. Once installed and connected, it functions as a standard multi-touch input device for your computer.
- Touch Input: Use your finger or a touch pen (greater than 5mm in diameter, IR opaque) to interact with the screen.
- Multi-touch: The frame supports up to 20 simultaneous touch points, allowing for complex gestures and collaborative use.
- Plug and Play: No additional drivers are typically required for Windows, Android, Linux, and Mac operating systems. Simply connect the USB cable, and the system should automatically detect and configure the touch functionality.
- Sunlight Resistance: The design ensures sensitive operation even in environments with strong sunlight.
5. Maintenance
To ensure the longevity and optimal performance of your touch frame, follow these maintenance guidelines:
- Cleaning: Use a soft, dry, lint-free cloth to gently wipe the frame. Avoid abrasive cleaners or solvents that could damage the aluminum alloy or the infrared sensors.
- Environmental Conditions: Operate and store the device within the specified temperature and humidity ranges to prevent damage.
- Physical Protection: While the aluminum alloy shell offers durability, avoid dropping or subjecting the frame to strong impacts.
- Sensor Care: The infrared receiving tubes are designed for long life (60000 hours). Even if individual LEDs fail, it should not affect overall usage. However, keep the sensor areas clear of obstructions.
6. Troubleshooting
If you encounter issues with your touch frame, try the following solutions:
- No Touch Response:
- Ensure the USB cable is securely connected to both the touch frame and the computer.
- Try connecting the USB cable to a different USB port on your computer.
- Restart your computer.
- Verify that your operating system is supported (Windows, Android, Linux, Mac).
- Check for any physical obstructions or dirt on the infrared sensors along the frame.
- Inaccurate Touch:
- Ensure the touch frame is securely mounted and not shifting.
- Check for any strong light sources directly interfering with the frame's sensors.
- Perform a touch calibration if your operating system or application supports it.
- Intermittent Touch:
- Check the USB cable for damage or loose connections.
- Ensure the power supply to the connected display/PC is stable.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GREENTOUCH |
| Model Number | GT-IR-F86 |
| Nominal Display Size | 86" |
| Actual Display Area Dimensions | 1895*1065mm |
| Type | INFRARed |
| Interface Type | USB |
| Products Status | STOCK |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
| Regular Size Support | 32"-98" |
| Custom Size Support | 100"-500" |
| Bezel Material | Aluminium Alloy |
| Touch Resolution | 32767x32767 |
| Touch Points | 20 Points |
| Touch Object | >5mm In Diameter, IR Opaque |
| Input Method | Finger, Touch Pen |
| Transparency | 100% |
| Response Speed | ≤8ms |
| Operating Voltage | DC 5V ±5% |
| Interface | USB, Plug And Play |
| Operating Current | <200mA |
| Touch Durability | Unlimited |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Operating Humidity | 10 to 85% |
| Storage Humidity | 10 to 90% |
| Anti-light Interference | more than 80000 Lux |
| Warranty | 1 Year |
| Operation Systems | Windows, Android, Linux, Mac |
Figure 7: Technical Specifications
Figure 8: Frame strip dimensions (0.37 inch thickness, 0.90 inch width)
Figure 9: High resolution (32767x32767) and LED Infrared Receiving Tube features
8. User Tips
No specific user tips from reviews or Q&A were provided for this product. However, general tips for infrared touch frames include:
- Ensure the display surface is clean and free of dust or smudges for optimal touch accuracy.
- Avoid placing the touch frame in direct sunlight or near strong infrared emitters, as this can interfere with sensor performance.
- For best multi-touch performance, use fingers or styluses that are opaque to infrared light.
9. Warranty and Support
The GreenTouch 86" Touch USB IR Multi-touch Screen Overlay Kit comes with a 1-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact the GreenTouch Official Store directly through the platform where you purchased the product.
GreenTouch is certified with ISO9001 Quality Management System and ISO14001 Environmental Management System. Products are certified to CE, FCC, RoHS, CB, UL, and HDMI standards.
Figure 10: About GreenTouch Technology Co., Ltd.
Figure 11: Product Certifications
10. Application Fields
The GreenTouch Infrared Multi-touch Screen Overlay Kit is versatile and can be used in a wide range of applications:
- Game tables
- Medical testing and diagnostics
- Public venue directories and information kiosks
- Product showroom demonstrations
- Boardroom presentations and collaborative workspaces
Figure 12: Diverse application fields
