TUYA Smart Fingerprint Door Lock 5050

TUYA Smart Fingerprint Door Lock Instruction Manual

Model: Smart Fingerprint Door Lock 5050 | Brand: TUYA

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your TUYA Smart Fingerprint Door Lock. This advanced keyless entry system offers multiple unlocking methods and smart home integration for enhanced security and convenience.

Key Features:

  • Multiple Unlocking Methods: Fingerprint, Password, IC Card, Mechanical Key, and Mobile App (WiFi).
  • 9 Languages Voice Prompts: Supports Chinese, English, Arabic, Russian, Portuguese, Spanish, Thai, Vietnamese, and Indonesian.
  • Durable Construction: Made from Aluminium Alloy Die-casting for sturdiness and corrosion resistance.
  • Weather Resistance: IP67 Protection Level, suitable for various environments.
  • Smart Home Integration: Compatible with Tuya smart home platform.
  • Emergency Power: External power supply option via power bank in case of battery depletion.
TUYA Smart Fingerprint Door Lock with 9 language flags

Figure 1: TUYA Smart Fingerprint Door Lock with multi-language voice support.

Voice Prompt Language Codes:

To change the voice prompt language, enter the corresponding code on the keypad followed by '#':

  • Chinese: 333666990#
  • English: 333666991#
  • Arabic: 333666992#
  • Russian: 333666993#
  • Portuguese: 333666994#
  • Spanish: 333666995#
  • Thai: 333666996#
  • Vietnamese: 333666997#
  • Indonesian: 333666998#

2. Product Components

Familiarize yourself with the main components of your smart door lock:

Diagram of the smart door lock's front and back panels, showing keypad, card sensor, fingerprint key, USB charging port, and battery box.

Figure 2: Front and Back Panel Components

  • Front Panel: Keypad, Card Sensor, Fingerprint Key.
  • Back Panel: Battery Box, USB Charging Port (for emergency power).
  • Accessories: Mechanical Keys (2), IC Cards (2).

3. Installation and Setup

3.1 Handle Direction Adjustment

The handle direction can be adjusted to suit your door's orientation. Follow these steps to change the handle position:

Diagram showing steps to change the handle direction: remove screws, twist doorknob, rotate component, tighten screws.

Figure 3: Guide to Change Handle Direction

  1. Remove the screws holding the handle in place.
  2. Twist the doorknob to the opposite direction.
  3. Rotate the round component 180 degrees, ensuring the marked small arrow is facing down.
  4. Tighten the screws.
  5. Repeat for the other side if necessary.

3.2 Lock Installation

For a visual guide on the complete installation process, please refer to the video below. It demonstrates how to properly install the smart lock onto your door.

Video 1: Smart Lock Installation Guide. This video demonstrates the step-by-step process of installing the TUYA Smart Fingerprint Door Lock.

Important: Ensure all cables are properly connected and secured before fastening the panels. Install 4x 1.5V AA batteries (not included) into the battery box on the back panel after installation is complete.

4. Operating Instructions

Your smart lock offers several convenient ways to unlock your door:

4.1 Fingerprint Unlocking

Place your registered finger on the fingerprint sensor. The lock will verify your fingerprint and unlock the door.

A hand pressing a finger on the fingerprint sensor of the smart lock.

Figure 4: Fingerprint Unlocking

4.2 Password Unlocking (Keypad)

Enter your registered password on the keypad. The lock supports virtual passwords to prevent others from peeping your code. You can enter random numbers before or after your actual password.

Diagram illustrating the virtual password feature, where random numbers can be entered before or after the real passcode.

Figure 5: Virtual Password Feature

4.3 IC Card Unlocking

Swipe your registered IC card over the card sensor area on the front panel to unlock the door.

A hand swiping an IC card over the smart lock's card sensor.

Figure 6: IC Card Unlocking

4.4 Mechanical Key Unlocking

In case of emergency or preference, you can use the provided mechanical keys to unlock the door. The keyhole is typically located at the bottom edge of the front panel.

A close-up of the smart lock showing the mechanical keyhole at the bottom.

Figure 7: Mechanical Key Unlocking

4.5 App Control (WIFI)

Connect your smart lock to the Tuya Smart app via WiFi for remote control and management. This allows you to unlock the door from anywhere, manage users, view access logs, and more.

A smartphone displaying the Tuya Smart app interface next to the smart lock.

Figure 8: App Control Interface

A smartphone displaying the Tuya Smart app interface next to the smart lock, emphasizing remote unlocking.

Figure 9: Remote App Unlocking

To set up app control:

  1. Download the "Tuya Smart" app from your smartphone's app store.
  2. Register or log in to your Tuya account.
  3. Follow the in-app instructions to add your smart lock device.
  4. Ensure your lock is within WiFi range for optimal connectivity.

5. Maintenance

5.1 Battery Replacement

The lock is powered by 4x 1.5V AA batteries (not included). When the battery level is low, the lock will provide a low battery warning. Replace all four batteries promptly to ensure continuous operation.

5.2 Emergency Power Supply

In the event that the batteries completely run out and you cannot unlock the door, you can use an external power bank to temporarily power the lock. Connect a power bank to the USB charging port located on the back panel of the lock.

A smart lock being powered by an external power bank connected via a USB cable.

Figure 10: External Power Supply in Emergency

6. Troubleshooting

  • Lock not responding: Check battery levels and replace if necessary. If batteries are new, try using the emergency power supply.
  • Fingerprint not recognized: Ensure your finger is clean and dry. Re-register your fingerprint if issues persist.
  • Password not working: Double-check the entered password. Ensure you are using the correct sequence, especially with the virtual password feature.
  • App connectivity issues: Ensure your lock is within WiFi range and your router is functioning correctly. Restart the lock and your router if needed.
  • Voice prompts not in desired language: Refer to the language codes in the introduction section to change the voice prompt language.

For further assistance, please contact customer support.

7. Specifications

AttributeValue
Brand NameL.AOL.AU
Smart home platformTuya
Ways To UnlockApp, Mechanical Keys, WiFi, Password, FINGERPRINT
MaterialAluminium Alloy
Handle DirectionDirection Reversible
Suitable Door TypeSteel Door, Wooden Door, Brass Door, Stainless Steel Door
Fit Door Thickness35-55mm
Suitable for Mortise5050 (Available in 22x147 and 22x240 sizes)
Doorknob FunctionBiometric, Key & Keypad
ConnectivityWiFi
Power SupplyDRY BATTERY (4*1.5v AA Batteries not included)
Protection LevelIP67
Finish TypePowder Coated
CertificationCE, FCC
OriginMainland China

Dimensions:

Diagram showing the dimensions of the smart lock: 250.0mm height, 63.0mm width, 22.0mm thickness.

Figure 11: Product Dimensions

  • Height: 250.0mm
  • Width: 63.0mm
  • Thickness: 22.0mm

8. User Tips

  • Password Entry: The lock supports direct number input for password entry. Utilize the virtual password feature (entering random numbers before or after your actual code) to enhance security against shoulder surfing.
  • Voice Prompts: Take advantage of the 9 available voice prompt languages for easier setup and operation. You can switch between languages using the provided codes provided in the Introduction section.
  • Battery Life: To maximize battery life, ensure the door closes smoothly without resistance, as excessive force can drain batteries faster.

9. Warranty and Support

For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase records for reference.


TUYA Smart Fingerprint Door Lock Installation Guide: Model 505000

TUYA Smart Fingerprint Door Lock Installation Guide: Model 505000

0:50 • 1280×1280 • installation

Related Documents - 505000

Preview Smart Keybox TUYA BLE Version User Manual - Secure Access Control
Comprehensive user manual for the Smart Keybox with TUYA BLE Version. Learn how to install, set up the Tuya app, manage users, fingerprints, passwords, and smart linkage for secure keyless entry.
Preview Tuya K7 Lock User Manual: Smart Door Lock Setup, App Guide, and Features
Official user manual for the Tuya K7 Lock. Get detailed instructions on app installation, device registration, user management (fingerprint, password, card), temporary codes, log queries, settings, and standalone operation. Learn about security features and power management.
Preview Smart Deadbolt Lock User Manual: Features, Setup, and Operation
Comprehensive guide to the Smart Deadbolt Lock, covering installation, setup via Smart Life/Tuya app, user management (fingerprint, password, card), and troubleshooting.
Preview WiFi Access Control User Manual: Smart Lock Setup and Management
Comprehensive user manual for WiFi Access Control smart locks. Learn how to download the app, register, add devices, manage users (fingerprint, PIN, card), set temporary codes, and configure settings for secure home access.
Preview A1 Tuya WiFi Fingerprint Smart Door Lock: Installation & Operation Manual
Comprehensive guide for the A1 Tuya WiFi Fingerprint Smart Door Lock, covering installation, operation, technical specifications, and Tuya app networking. Learn how to set up and use dynamic passwords, NFC, and fingerprint access.
Preview Smart Lock Operation Manual: Setup, Features, and App Guide
A comprehensive guide to operating your intelligent electronic lock, including setup, product parameters, app integration with Doodle Smart, and managing user access via fingerprint, password, and card.