FENVI M.2 To PCIE X1

Contents

FENVI M.2 NVME to PCIe 4.0 Adapter Instruction Manual

Model: M.2 To PCIE X1 | Brand: FENVI

1. Introduction

The FENVI M.2 NVME to PCIe 4.0 Adapter is designed to enhance the storage capabilities and performance of your personal computer. This adapter allows you to connect an M.2 NVMe SSD to a PCIe slot on your motherboard, providing high-speed data transfer and expanding your system's storage options. It features an integrated aluminum heatsink to maintain optimal operating temperatures for your SSD, ensuring longevity and stable performance.

FENVI M.2 NVME to PCIe adapter with bracket
FENVI M.2 NVME to PCIe 4.0 Adapter
Product overview and features demonstration.

2. Installation Guide

Follow these steps to correctly install your FENVI M.2 NVME to PCIe 4.0 Adapter and M.2 SSD into your computer system.

  1. Prepare the Adapter: Connect the PCIe adapter card to its metal baffle. Secure them together by tightening the provided screws.
  2. Insert M.2 SSD: Carefully insert your M.2 NVMe SSD into the M.2 slot on the adapter card. Ensure the SSD is fully seated.
  3. Secure SSD: Align the SSD with the mounting hole on the adapter card and gently press it down. Use the provided screw to secure the M.2 SSD in place.
  4. Tighten Screws: Double-check all screws on the adapter card and baffle to ensure they are securely tightened.
  5. Install into Motherboard: Locate an available PCIe X1, X4, X8, or X16 slot on your motherboard. Carefully plug the assembled adapter card into the chosen PCIe slot.

Important Safety Note: This product is designed for PCI Express (PCIe) slots (X1, X4, X8, X16). Do NOT insert it into a legacy PCI slot. Incorrect insertion may cause damage to your motherboard, adapter card, and solid-state hard disk.

Installation steps for FENVI M.2 NVME to PCIe adapter
Visual guide for adapter and SSD installation.

2.1 M.2 SSD Compatibility

The adapter supports M.2 NVMe/AHCI SSDs of various sizes:

  • 2230 (22mm x 30mm)
  • 2242 (22mm x 42mm)
  • 2260 (22mm x 60mm)
  • 2280 (22mm x 80mm)

It supports capacities up to 2TB/4TB.

Diagram showing supported M.2 SSD sizes
Supported M.2 SSD sizes (2230, 2242, 2260, 2280).
Diagram illustrating M.2 NVME M key interface and NVME mark
Ensure your SSD has an M key interface and NVMe mark.

2.2 PCIe Slot Compatibility

The adapter is compatible with PCI-E X1, X4, X8, and X16 slots. It is backward compatible with PCIe 1.0, 2.0, and 3.0 standards.

Diagram showing compatible PCI-E interface types
Compatible PCI-E interface types: X1, X4, X8, X16.
Comparison of M.2 NVME and PCIe X1 interfaces
Confirm the interface type before purchasing and installing.

3. Operating System Compatibility

The FENVI M.2 NVME to PCIe 4.0 Adapter is generally plug-and-play for modern operating systems.

  • Supported OS: Windows 11, Windows 10, Windows 8, Linux, Mac OS. No additional drivers are required for these operating systems.
  • Unsupported OS: Windows 7 does not have native NVMe drivers and therefore cannot support M.2 PCIe SSDs with this adapter.

If your motherboard's BIOS natively supports NVMe, the SSD should be recognized directly without any further action. For earlier motherboards, you may need to update your BIOS to a version that supports NVMe. Refer to your motherboard manufacturer's website for the latest BIOS updates and instructions.

4. Maintenance

To ensure the longevity and optimal performance of your M.2 NVME to PCIe adapter and SSD, consider the following maintenance tips:

  • Keep Clean: Regularly clean your computer's interior to prevent dust buildup on the adapter and heatsink, which can impede cooling.
  • Proper Airflow: Ensure your PC case has adequate airflow to dissipate heat effectively, especially for high-performance SSDs.
  • Handle with Care: When handling the adapter or SSD, avoid touching the gold contacts or sensitive components. Use anti-static precautions.

5. Troubleshooting

  • SSD Not Detected:
    • Ensure the M.2 SSD is correctly seated in the adapter and the adapter is fully inserted into the PCIe slot.
    • Verify that your motherboard's BIOS/UEFI settings are configured to recognize NVMe devices. You might need to enable NVMe support or change boot modes (e.g., from Legacy to UEFI).
    • For older motherboards, check if a BIOS update is available that adds NVMe support.
    • Confirm the SSD is an NVMe type and not a SATA M.2 SSD, as this adapter is for NVMe only.
  • Slow Performance:
    • Ensure the adapter is installed in a PCIe 4.0 compatible slot on your motherboard to achieve maximum speeds (up to 16Gbps). If installed in a PCIe 3.0 slot, speeds will be limited to PCIe 3.0 specifications.
    • Check for proper heatsink contact with the SSD to prevent thermal throttling.
    • Verify that your operating system is up-to-date and has the necessary NVMe drivers (usually built-in for Windows 8/10/11).
  • System Instability:
    • Ensure the adapter is not inserted into a legacy PCI slot. This can cause severe damage.
    • Check for any loose connections or components within your PC.

6. Specifications

FeatureSpecification
Model NumberM.2 To PCIE X1
Interface TypePCI Express
TypeAdd On Cards
PCIe CompatibilityPCIe 4.0 X1, X4, X8, X16 (Backward compatible with PCIe 1.0, 2.0, 3.0)
Max Transfer SpeedUp to 16Gbps (1600+ MB/s Read, 1600+ MB/s Write)
M.2 SSD SupportNVMe/AHCI M.2 SSDs (M key)
Supported M.2 SSD Sizes2230, 2242, 2260, 2280
Max M.2 SSD Capacity2TB/4TB
Operating System SupportWindows 11/10/8, Linux, Mac OS (Windows 7 not supported)
HeatsinkIntegrated Aluminum SSD Heatsink
CertificationCE
OriginMainland China
Package Dimensions (L x W x H)18 cm x 11 cm x 4 cm
Package Weight0.094 kg

7. User Tips

  • Check Motherboard Manual: Always consult your motherboard's manual to confirm available PCIe slots and their generation (e.g., PCIe 3.0 or 4.0) to ensure compatibility and optimal performance.
  • BIOS Update: If you are using an older motherboard and encounter issues with SSD recognition, updating your BIOS to the latest version is often a crucial step.
  • SSD Type: Double-check that your M.2 SSD is NVMe (Non-Volatile Memory Express) and not SATA. This adapter is specifically for NVMe SSDs.

8. Support

For further assistance or detailed information, please refer to the official user manual PDF available online. This document provides comprehensive guidance and technical specifications.

You can access the user manual PDF here.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.