Introduction
This manual provides comprehensive instructions for the safe and efficient operation of your Spectra SP20 LED Aquarium Light. Designed for both salt and fresh water aquariums under 45cm, this 20W full-spectrum light offers adjustable dimming and timing functions to create an optimal environment for your aquatic life.
Safety Instructions
- Ensure the power supply matches the specified input voltage (AC 100-240V).
- Do not immerse the light fixture or power adapter in water.
- Always unplug the device before performing any maintenance or cleaning.
- Keep out of reach of children and pets.
- Operate within the specified working temperature range of 0°C to 40°C.
- Do not attempt to disassemble or repair the unit yourself. Contact qualified personnel for service.
Setup Guide
- Unpack: Carefully remove all components from the packaging.
- Choose Location: Select a suitable location on your aquarium for the light. The light is designed for tanks less than 45cm in length.
- Attach Fixture: The Spectra SP20 features a clip-on fixture. Securely attach the clamp to the rim of your aquarium. The clamp can accommodate a maximum thickness of 15mm.
- Adjust Position: Utilize the flexible rubber metal bracket to adjust the light head's position and angle over your aquarium as desired.
- Connect Power: Plug the power adapter into a suitable electrical outlet. Ensure the correct plug type (US Plug or EU Plug) is used for your region.
- Verify Operation: Once connected, the light is ready for operation.
Operating Instructions
The Spectra SP20 LED Aquarium Light features an inline remote control for power, dimming, and timing functions.
Power ON/OFF
- Press the ON/OFF button once to temporarily turn the power on or off.
- If the timer is active, pressing ON/OFF will restore the output without affecting the timing function.
Dimming Function
Adjust the intensity and color spectrum using Dimming Channel A and B buttons.
- Press button A or B to adjust the intensity.
- Each channel can be adjusted in 10% increments.
Timing Function
The timing button is used to control the lighting period and cycle operation. This function overrides manual ON/OFF for scheduled operation.
- Press once: The red indicator light turns on. The timer is set for 6 hours ON and 18 hours OFF.
- Press twice: The green indicator light turns on. The timer is set for 8 hours ON and 16 hours OFF.
- Press three times: The blue indicator light turns on. The timer is set for 10 hours ON and 14 hours OFF.
- Press four times: All indicator lights turn off, and the timer is permanently deactivated.
Note: The ON/OFF button only temporarily controls power and does not affect the timing function once set. The timing function controls the overall lighting schedule.
Maintenance
- Cleaning: Regularly wipe the light fixture and LEDs with a soft, dry cloth to remove dust and water spots. Ensure the device is unplugged before cleaning.
- Heat Sink: The light features a built-in aluminum heat sink for efficient cooling. Ensure the vents on the top of the light head are not obstructed to maintain proper airflow and quiet operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose connection, faulty adapter. | Check power outlet, ensure all connections are secure. Try a different outlet. |
| Dimming/Timing functions not responding. | Remote control issue, timing function already active. | Ensure the remote is pointed at the sensor (if applicable). If a timing cycle is active, the ON/OFF button will not cancel it, only temporarily pause/resume. Deactivate timing by pressing the timing button four times. |
| Light flickers or is inconsistent. | Unstable power supply, internal fault. | Check power connections. If problem persists, discontinue use and contact support. |
Specifications
| Feature | Detail |
|---|---|
| Model | SP20 |
| Input Voltage | AC 100-240V |
| Working Frequency | 50/60Hz |
| LED Power | 20W Max (4 x 5W LEDs) |
| LEDs Quantity | 4 PCS |
| Working Temperature | 0°C to 40°C |
| Light Head Size | φ90mm x 25mm |
| Arm Length | 235mm |
| Max Clamp Thickness | 15mm |
| Recommended Tank Size | <45cm |
| Application Type | Fish (Salt or Fresh Water) |
| Fixture Type | Clip-On |
| Battery Included | No |
| High-concerned chemical | None |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 18cm x 16cm x 5cm |
| Package Weight | 0.346 kg |
LED Configurations
The Spectra SP20 is available in configurations optimized for different aquarium types:
- Fresh Water: Features white and yellow LEDs for optimal plant growth and natural coloration.
- Salt Water: Features blue and white LEDs to enhance coral fluorescence and mimic deep-sea conditions.
User Tips
- For optimal plant growth in freshwater tanks, ensure the light is positioned to provide even coverage.
- In saltwater tanks, experiment with dimming levels to achieve the desired aesthetic and coral response.
- Utilize the timing function to establish a consistent day/night cycle for your aquarium inhabitants, promoting their health and natural behaviors.
Warranty and Support
For any issues or questions regarding your Spectra SP20 LED Aquarium Light, please contact the seller or manufacturer's customer support. Keep your purchase receipt for warranty claims.
